1. Product Overview
The NETELY Wireless-AC 7265NGW is a high-performance NGFF M2 interface wireless network adapter designed for laptops and desktop computers. It integrates dual-band Wi-Fi 5 (802.11ac) connectivity, offering speeds up to 1200Mbps (300Mbps on 2.4GHz and 867Mbps on 5GHz), along with Bluetooth 4.2. This adapter is suitable for various applications including online gaming, video streaming, and general internet browsing, and also functions as a WiFi audio adapter for compatible devices.
Image: NETELY Wireless-AC 7265NGW adapter showing dual-band speeds (2.4GHz 300Mbps, 5GHz 867Mbps) and applications like internet surfing, live streaming, video streaming, and gaming.
2. Key Features
- Dual-Band Wi-Fi 5 (802.11ac): Provides high-speed wireless connectivity with up to 300Mbps on the 2.4GHz band and 867Mbps on the 5GHz band, totaling 1200Mbps.
- Integrated Bluetooth 4.2: Enables connection to various Bluetooth devices, including headphones, TWS earbuds, soundbars, and speakers.
- WiFi Audio Adapter Functionality: Supports audio transmission to WiFi-enabled audio devices.
- NGFF M2 Interface: Designed for easy installation in compatible laptop and desktop PC motherboards.
- Advanced Security: Supports 64-bit and 128-bit WEP, WPA, WPA2, WPA3, AES-CCMP, and TKIP encryption protocols for secure wireless connections.
Image: The adapter's WiFi audio capabilities, illustrating connectivity with various audio devices such as speakers, headphones, TWS earbuds, and soundbars.
3. System Compatibility
This adapter is compatible with a range of operating systems and requires a specific hardware interface.
Supported Operating Systems:
- Windows 7 (32/64-bit)
- Windows 8 (32/64-bit)
- Windows 8.1 (32/64-bit)
- Windows 10 (32/64-bit)
- Windows 11 (64-bit) - Requires installation of WiFi Network and WiFi Audio drivers.
- Linux kernel 4.2+ (Requires compilation)
Hardware Requirements:
- Laptop or desktop PC motherboard with an available NGFF M2 network interface slot (E Key or A Key).
Image: Visual representation of the adapter's compatibility with various Windows versions and Linux kernel 4.2+.
4. Installation Guide
Follow these steps to install the NETELY Wireless-AC 7265NGW adapter into your laptop or desktop PC.
Important Pre-Installation Note:
Before proceeding, ensure your laptop or desktop PC motherboard has an available NGFF M2 network interface slot. This adapter uses an NGFF M2 E and A Key design.
Image: Detailed visual steps for installing the NGFF M2 WiFi card into a laptop motherboard.
- Step 1: Open the Laptop Case. Carefully open the casing of your laptop or desktop PC to access the motherboard. Locate the existing wireless network card or the empty NGFF M2 interface slot.
- Step 2: Remove Previous Card (if applicable). If you are replacing an existing network card, gently remove it. Disconnect any attached antenna cables.
- Step 3: Locate the NGFF M2 Slot. Identify the NGFF M2 slot on your motherboard. It typically has a screw hole at the end for securing the card.
- Step 4: Insert the Adapter and Connect Antennas. Insert the NETELY Wireless-AC 7265NGW card into the NGFF M2 slot at an angle, then press it down and secure it with the retaining screw. Connect your existing WiFi antenna connectors to the corresponding terminals on the new WiFi card (Main and Aux).
Driver Installation:
After physical installation, you will need to install the necessary drivers for the WiFi and Bluetooth functionalities. For Windows 11 64-bit and Linux kernel 4.2+, specific driver installation or compilation is required.
- Windows: For most Windows versions, drivers may be automatically detected. If not, download the latest drivers from the official NETELY website: www.netely.com.
- Linux: For Linux kernel 4.2+, driver compilation may be necessary. Refer to the documentation on the NETELY website or Intel's support pages for detailed instructions.
5. Operating Instructions
Wi-Fi Connectivity:
- Ensure drivers are installed correctly.
- Access your operating system's network settings.
- Scan for available Wi-Fi networks.
- Select your desired network (2.4GHz or 5GHz) and enter the password if required.
- The adapter supports IEEE 802.11ac (Wi-Fi 5) standard and encryption types including WEP, WPA, WPA2, and WPA3.
Bluetooth Connectivity:
- Ensure Bluetooth drivers are installed.
- Enable Bluetooth in your operating system's settings.
- Put your Bluetooth device (e.g., headphones, speaker) into pairing mode.
- On your computer, search for new Bluetooth devices.
- Select your device from the list and follow any on-screen prompts to complete pairing.
6. Specifications
| Brand | NETELY |
| Model | Wireless-AC 7265NGW |
| Main Chipset | Intel Wireless-AC 7265 |
| Hardware Interface | NGFF M2 (802.11 ac/b/g/n) |
| Wi-Fi Standard | IEEE 802.11ac (Wi-Fi 5) |
| Data Transfer Rate | 1200 Mbps (2.4GHz: 300Mbps, 5GHz: 867Mbps) |
| Bluetooth Version | Bluetooth 4.2 |
| Encryption | 64/128-bit WEP, WPA, WPA2, WPA3, AES-CCMP, TKIP |
| Compatible Devices | Laptops, Desktop PC Motherboards, Industrial Devices |
| UPC | 779776782556 |
Image: Front and back views of the NETELY Wireless-AC 7265NGW adapter, illustrating its physical design and the NETELY branded packaging.
7. Important Notes
- Always ensure your system's BIOS/UEFI settings allow for third-party wireless cards if you encounter detection issues.
- For optimal performance, use updated drivers from the official NETELY website.
- Physical installation requires careful handling of internal computer components. If you are unsure, seek professional assistance.
8. Support and Warranty
For technical support, driver downloads, or warranty information, please visit the official NETELY website or contact their customer service. Specific warranty terms may vary by region and retailer.
- Official Website: www.netely.com