EACHPAI V7 4K UHD Touchscreen Dual Dash Cam User Manual

1. Introduction

1.1 Product Overview

The EACHPAI V7 is a high-definition dual dash camera system designed to record driving footage from both the front and rear of your vehicle. It features 4K UHD resolution for the front camera and 1080P for the rear, ensuring clear and detailed recordings. Equipped with a touchscreen interface, built-in Wi-Fi, and external GPS, the V7 offers comprehensive monitoring and ease of use.

1.2 Key Features

• 4K UHD Front Recording: Captures video at 3840x2160P @30fps with an 8-megapixel IMX415 sensor and NTK96670 processor.
• 1080P Rear Recording: Records traffic behind your vehicle.
• Wide-Angle Lenses: 170° front and 150° rear for broad coverage.
• F/1.8 Large Aperture & 6-Layer Glass Lens: Enhances light intake for superior image quality, especially in low-light conditions.
• 3.16-inch Touchscreen: Intuitive control and playback.
• Built-in Wi-Fi: Connects to the EACHPAI app for real-time viewing, downloading, and sharing.
• External GPS Module: Records route, time, date, and speed data.
• 24-Hour Parking Monitor: Requires a hardwire kit (sold separately) to detect motion or impact while parked.
• G-Sensor: Automatically locks video files upon impact.
• Loop Recording: Overwrites the oldest files when the memory card is full.
• Super Capacitor: Provides reliable power in extreme temperatures and extends lifespan.
• WDR (Wide Dynamic Range): Improves video clarity in varying light conditions.
• H.265 Encoding: Efficient video compression for optimized storage.

Image: Overview of EACHPAI V7 Dash Cam's core specifications including CPU, sensor, resolution, aperture, wide-angle, and 6-layer glass lens.

2. Package Contents

Please check the package for the following items:

• 1 x EACHPAI V7 Car Camera (Front Dash Cam)
• 1 x Rear Camera
• 1 x GPS Module
• 1 x Car Charger Cable
• 1 x Rear Lens Cable
• 1 x Two-in-One Tie Line
• 3 Sets of Static Stickers
• 1 x Small Pry Tool
• 1 x English User Manual
• 1 x Warranty Card

Image: Illustration of the EACHPAI V7 Dash Cam and its included accessories.

3. Setup Guide

3.1 Inserting the MicroSD Card

1. Ensure the dash cam is powered off.
2. Locate the MicroSD card slot on the side of the dash cam.
3. Insert a high-speed MicroSD card (Class 10 or higher, up to 256GB recommended) into the slot until it clicks into place.
4. To remove, gently push the card in until it springs out.

3.2 Installing the Front Dash Cam

1. Clean the windshield area where you intend to mount the dash cam.
2. Attach a static sticker to the windshield first, then mount the dash cam onto the static sticker using the adhesive mount. This allows for easier removal without leaving residue.
3. Position the dash cam to ensure a clear view of the road ahead, avoiding obstruction of the driver's view.

3.3 Installing the Rear Camera

1. Connect the rear camera to the main dash cam using the provided rear lens cable.
2. Mount the rear camera on the rear windshield, ensuring a clear view of the road behind. Use static stickers and adhesive as with the front camera.
3. Route the rear camera cable neatly along the vehicle's headliner and A-pillars to the front dash cam.

Image: A small 1080p rear camera, designed to record traffic behind the vehicle.

3.4 Connecting the GPS Module

1. Connect the external GPS module to the designated port on the main dash cam.
2. Mount the GPS module on the dashboard or windshield where it has a clear view of the sky for optimal signal reception.

3.5 Powering the Dash Cam

1. Plug the car charger cable into your vehicle's cigarette lighter socket.
2. Connect the other end of the car charger cable to the dash cam's power input.
3. The dash cam will automatically power on and begin recording when the vehicle's ignition is turned on.

4. Operating Instructions

4.1 Basic Operation

The EACHPAI V7 dash cam features a 3.16-inch touchscreen for easy navigation and control. Power on the device by starting your vehicle. The dash cam will automatically begin recording.

Image: The 3.16-inch IPS HD screen of the EACHPAI V7 Dash Cam, highlighting its touchscreen operation.

4.2 Recording Modes

4.2.1 Normal Recording

When powered on, the dash cam continuously records video in segments. These segments are saved to the MicroSD card.

4.2.2 Loop Recording

This feature ensures continuous recording by overwriting the oldest unlocked video files when the MicroSD card reaches its capacity. This prevents the card from filling up and stopping new recordings.

Image: An icon representing loop recording, indicating that older files are overwritten when the memory card is full.

4.2.3 Emergency Recording (G-Sensor)

The built-in G-sensor detects sudden impacts or collisions. When an event is detected, the current video segment is automatically locked and protected from being overwritten by loop recording. These files are stored in a separate folder on the MicroSD card.

Image: An illustration depicting collision protection and automatic video locking by the dash cam.

4.3 24-Hour Parking Monitor

To enable 24-hour parking monitoring, a hardwire kit (not included) is required to provide continuous power to the dash cam from your vehicle's battery. Once installed, the dash cam can monitor your car while parked. It will activate and record if motion is detected in front of the vehicle or if an impact occurs. Recording stops after 10 seconds of no motion.

Note: Professional installation of the hardwire kit is recommended.

Image: The 24-hour parking monitoring feature of the EACHPAI V7 Dash Cam, showing continuous surveillance when the car is parked.

4.4 Wi-Fi Connectivity and App Usage

The EACHPAI V7 has built-in Wi-Fi for connecting to your smartphone via the EACHPAI app. This allows you to:

• View live footage from the dash cam.
• Play back recorded videos.
• Download video files directly to your phone.
• Share videos to social media platforms.

1. Download the "EACHPAI" app from your smartphone's app store.
2. On the dash cam, enable the Wi-Fi function.
3. On your phone, connect to the dash cam's Wi-Fi hotspot.
4. Open the EACHPAI app to access the dash cam's features.

Note: If you navigate away from the Wi-Fi function page on the dash cam, the Wi-Fi may automatically turn off and need to be re-enabled for connection.

Image: The EACHPAI V7 Dash Cam's Wi-Fi feature, showing real-time viewing, saving, playback, and sharing of video footage via a smartphone app.

4.5 GPS Functionality

The external GPS module records your vehicle's route, time, date, and speed. To view this information alongside your video footage:

1. Download the "EACHPAI Player" software to your computer.
2. Transfer the video files from your MicroSD card to your computer.
3. Open the video files using the EACHPAI Player software to see the integrated GPS data.

Image: The external GPS module of the EACHPAI V7 Dash Cam, illustrating its ability to localize and record route, time, date, and speed information.

4.6 Night Vision

The EACHPAI V7 utilizes a powerful processor, IMX415 sensor, and F/1.8 large aperture 6-layer glass lens to significantly improve night vision capabilities and image quality in low-light conditions.

Image: The super night vision capability of the EACHPAI V7 Dash Cam, highlighting its powerful processor, IMX415 chip, and F/1.8 large aperture 6-layer glass lens for enhanced low-light performance.

4.7 WDR (Wide Dynamic Range)

The WDR function helps the dash cam capture clearer images in scenes with high contrast, such as entering or exiting a tunnel, by balancing bright and dark areas of the video.

Image: An illustration of Wide Dynamic Range (WDR), demonstrating the dash cam's ability to capture details in both bright and dark areas.

5. Maintenance

5.1 Cleaning the Lenses and Screen

Regularly clean the front and rear camera lenses, as well as the touchscreen, with a soft, lint-free cloth. For stubborn smudges, use a specialized lens cleaning solution. Avoid abrasive materials that could scratch the surfaces.

5.2 MicroSD Card Management

It is recommended to format the MicroSD card periodically (e.g., once a month) within the dash cam's settings to ensure optimal performance and prevent data corruption. Back up any important video files before formatting.

5.3 Firmware Updates

Check the EACHPAI official website for any available firmware updates. Keeping your dash cam's firmware up-to-date can improve performance, add new features, and fix bugs.

6. Troubleshooting

• Dash Cam does not power on:
  Ensure the car charger is properly connected to both the dash cam and the vehicle's power outlet. Check if the vehicle's power outlet is functioning.
• Dash Cam stops recording:
  Check if the MicroSD card is full. Format the card if necessary (back up important files first). Ensure the MicroSD card is Class 10 or higher and not defective.
• Video footage is blurry or unclear:
  Clean the camera lenses. Ensure the protective film has been removed from the lenses. Check if the dash cam is securely mounted and not vibrating.
• Wi-Fi connection issues:
  Ensure Wi-Fi is enabled on the dash cam and your smartphone. Try restarting both devices. Make sure you are connecting to the correct Wi-Fi hotspot.
• GPS signal not found:
  Ensure the GPS module is properly connected and mounted in a location with a clear view of the sky. Move the vehicle to an open area away from tall buildings or dense foliage.
• Parking Monitor not working:
  Verify that a hardwire kit is correctly installed and providing continuous power. Check the parking monitor settings in the dash cam menu.
• Dash Cam freezes or crashes:
  Press and hold the power button to force a restart. If the issue persists, try formatting the MicroSD card or performing a factory reset (refer to the dash cam's settings menu).

7. Specifications

8. Warranty and Support

8.1 Warranty Information

This product is covered by the standard Amazon return and exchange policy. For any issues or warranty claims, please contact the seller directly or refer to the warranty card included in the package.

8.2 Customer Support

For technical assistance or further inquiries, please reach out to EACHPAI customer support through the contact information provided on the warranty card or the official EACHPAI website.