1. Product Overview
The AMULISS Professional Mens Hair Clippers are designed for precise and efficient hair trimming and grooming. This cordless device features a powerful motor, sharp blades, and a convenient LED display for battery status, making it suitable for various hair types and styles.
Key Features:
- Superior Performance: Powerful motor and sharp blade for easy, quick cuts without snagging.
- Cordless USB Rechargeable Design: 1500mAh Lithium-ion battery provides over 180 minutes of run time with a 2-hour charge. Compatible with any USB charger interface for maximum mobility.
- Cool and Practical Design: Exquisite, compact, and ergonomic for comfortable grip. Features a stainless steel suspension bracket with a transparent, removable protective case.
- Low Noise Operation: Strong power with minimal noise (less than 60dB), ensuring a quiet and labor-saving grooming experience.
- LED Display: Clearly shows remaining battery percentage.
Image: The AMULISS Professional Hair Clippers in golden color, displayed with its packaging, various guide combs, cleaning brush, and USB charging cable.
2. What's Included
Your AMULISS Professional Hair Clippers package includes the following items:
- 1x Electric Hair Clipper (Golden)
- 3x Guide Combs (1mm, 2mm, 3mm)
- 1x USB Charging Cable
- 1x Instruction Manual
- 1x Cleaning Brush
- 1x Protective Cover
Image: A visual representation of all items included in the package: the hair clipper, three guide combs, USB charging cable, cleaning brush, and protective cover.
3. Setup
3.1 Charging the Device
Before first use, fully charge your hair clipper. Connect the USB charging cable to the charging port at the bottom of the clipper and plug the other end into any standard USB charger interface (e.g., computer, power bank, wall adapter). The LED display will illuminate, showing the current battery percentage. A full charge takes approximately 2 hours and provides over 180 minutes of continuous use.
Image: The hair clipper connected to its USB charging cable, illustrating how to power the device.
3.2 Attaching Guide Combs
Select the desired guide comb (1mm, 2mm, or 3mm) based on your preferred hair length. Align the comb with the clipper blade and gently push it until it clicks securely into place. Ensure the comb is firmly attached before operating the device.
Image: The hair clipper shown with its three interchangeable guide combs (1mm, 2mm, 3mm) for different trimming lengths.
4. Operating Instructions
4.1 General Use
To turn on the clipper, press the power button located on the front. The LED display will illuminate, showing the current battery percentage. To turn off the device, press the power button again. The ergonomic design ensures a comfortable grip for extended use.
4.2 Trimming Techniques
The AMULISS hair clipper is versatile and can be used for various grooming needs:
- Haircut: Use the appropriate guide comb for your desired hair length. Move the clipper against the direction of hair growth for an even cut.
- Beard Trimming: For beard shaping and trimming, use a guide comb or the bare blade for precise lines.
- Body Trimming: The sharp, R-shaped design T-blades are suitable for body hair trimming, providing a smooth and safe experience.
- Carving/Detailing: The zero-gapped blades allow for intricate designs and sharp lines, perfect for detailing and artistic hair carving.
Image: Demonstrates the versatility of the hair clipper for various uses including haircut, carving, beard trimming, and body grooming.
5. Maintenance
5.1 Cleaning
After each use, ensure the clipper is turned off. Remove any attached guide combs. Use the provided cleaning brush to remove loose hairs from the blades and the clipper body. The transparent protective case can be removed for thorough cleaning of the blade area. Do not rinse the entire unit under water unless specified as waterproof (this model is not explicitly stated as fully waterproof, so avoid direct water exposure to the main body).
5.2 Storage
Store the hair clipper in a cool, dry place away from direct sunlight and moisture. Keep it out of reach of children. Ensure the protective cover is placed over the blades when not in use to prevent damage and maintain sharpness.
6. Troubleshooting
| Issue | Possible Cause / Solution |
|---|---|
| Device not turning on after charging. | Ensure the power button is pressed firmly. Check the LED display for battery percentage; if low, recharge the device. If the issue persists, contact customer support. |
| Blades not cutting effectively or pulling hair. | The blades may be clogged with hair. Turn off the device and use the cleaning brush to remove any trapped hairs. Ensure the blades are properly aligned. If blades are dull, professional sharpening may be required. |
| Unusual noise during operation. | This could indicate a foreign object caught in the blades or a need for lubrication. Turn off the device, clean the blades thoroughly. If the noise continues, discontinue use and contact customer support. |
7. Specifications
| Model Number: | AU-JM-700AL |
| Brand: | AMULISS |
| Battery Type: | 1500mAh Lithium-ion (included) |
| Charging Time: | Approx. 2 hours |
| Run Time: | Over 180 minutes |
| Item Weight: | 208 Grams (7.34 ounces) |
| Package Dimensions: | 7.56 x 3.5 x 1.93 inches |
| Recommended Uses: | Beard, Head, Mustache, Body |
| Color: | Golden |
8. Warranty and Support
AMULISS offers a one-year free replacement warranty for any quality problems. For any questions or assistance, please contact AMULISS support through the Amazon platform. We are committed to providing a 100% satisfactory solution.
For further information and support, please visit the AMULISS Store on Amazon.
