1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Schneider Electric LV434128 Front Display Module (FDM128) for Enerlin'X systems. This module is designed to provide a user interface for monitoring and controlling compatible Schneider Electric devices, such as Compact NSX, PowerPact, Masterpact, and Acti 9 Smartlink SI B (Ethernet) or Acti 9 Smartlink Modbus systems.
Please read this manual thoroughly before attempting any installation or operation. Keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTIONS
DANGER: POTENTIAL FOR EXPLOSION
- Remove all power before connection/disconnection.
- Avoid electrostatic charging/discharging.
- Refer to the complete manual for detailed safety procedures.
Failure to follow these instructions will result in death or serious injury.
Only qualified personnel should install, operate, and maintain this equipment. Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
2. Setup and Installation
The LV434128 Front Display Module requires careful installation to ensure proper functionality and safety. Ensure all power is disconnected from the system before beginning installation.
2.1. Unpacking and Inspection
Carefully unpack the FDM128 module and inspect it for any signs of damage during transit. If any damage is found, contact your supplier immediately.
Figure 2.1: The product box for the Schneider Electric LV434128 Front Display Module.
Figure 2.2: Close-up of the product label on the LV434128 box, showing model number, voltage, and serial number.
Figure 2.3: The LV434128 Front Display Module along with its accompanying documentation and accessories.
2.2. Mounting the Module
The FDM128 is designed for front panel mounting. Ensure adequate space for ventilation and access to connections. Refer to the detailed mounting instructions provided in the full installation guide (available from Schneider Electric's official website).
Figure 2.4: An angled view of the LV434128 module, showing its sleek front display and side profile.
Figure 2.5: Side view of the LV434128 module, highlighting the cooling fins on the rear housing for heat dissipation.
2.3. Electrical Connections
The FDM128 operates on DC 24V. Connect the module to a stable 24V DC power supply, ensuring correct polarity. The module is designed for indoor use only (4X Indoor Use Only) and is classified as Class 2 equipment.
Before making any connections, ensure the power supply is completely de-energized.
Figure 2.6: The rear of the LV434128 module, displaying critical safety warnings, electrical specifications (DC24V 5.2W), and regulatory compliance markings.
The module features communication ports for connection to compatible systems (e.g., Ethernet for Smartlink SI B or Modbus). Refer to the system-specific documentation for detailed wiring diagrams.
3. Operating Instructions
Once properly installed and powered, the LV434128 FDM128 will initialize. The display will show the Schneider Electric logo followed by the main operating screen.
3.1. Powering On/Off
- Power On: Ensure the 24V DC power supply is connected and energized. The module will automatically power on.
- Power Off: Disconnect the 24V DC power supply. The module will power down. Always follow safety procedures before disconnecting power.
3.2. Navigating the Interface
The FDM128 features a touch-sensitive display for navigation. Specific navigation methods and available screens will depend on the connected system (e.g., Compact NSX, Masterpact). General navigation principles include:
- Main Menu: Typically accessed via a home icon or a specific gesture.
- Data Display: View real-time measurements, status, and event logs.
- Settings: Access configuration parameters (requires appropriate user permissions).
- Alarms/Events: Review active and historical alarms.
For detailed information on specific menu structures and functionalities, consult the documentation for the device to which the FDM128 is connected.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your FDM128 module.
4.1. Cleaning
Clean the display screen and module casing periodically using a soft, lint-free cloth. For stubborn marks, a slightly damp cloth with a mild, non-abrasive cleaning solution can be used. Do not spray cleaners directly onto the module.
4.2. Firmware Updates
From time to time, Schneider Electric may release firmware updates to improve performance or add new features. Refer to the Schneider Electric website or your system's documentation for instructions on how to check for and apply firmware updates.
4.3. Environmental Considerations
Ensure the operating environment remains within the specified temperature and humidity ranges. Avoid exposing the module to direct sunlight, excessive dust, or corrosive atmospheres.
5. Troubleshooting
This section provides basic troubleshooting steps for common issues. For more complex problems, contact Schneider Electric support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Module does not power on. | No power supply, incorrect voltage, faulty wiring. | Verify 24V DC power supply connection and voltage. Check wiring for continuity and correct polarity. |
| Display is blank or frozen. | Software issue, communication error, module fault. | Cycle power to the module. Check communication cables. If problem persists, contact support. |
| No communication with connected device. | Incorrect communication settings, faulty cable, device not powered. | Verify communication cable integrity. Check communication settings on both the FDM128 and the connected device. Ensure the connected device is powered on. |
6. Specifications
Key technical specifications for the Schneider Electric LV434128 Front Display Module:
- Model: LV434128 (FDM128)
- Manufacturer: Schneider Electric
- Input Voltage: DC 24V
- Power Consumption: 5.2W (Class 2)
- Item Weight: 1.85 Pounds (approx. 0.84 kg)
- First Available: October 1, 2020
- Environmental Rating: 4X Indoor Use Only
- Compliance: IEC 61131-2, CE, cULus Listed (4MA0)
- Operating Temperature: T4A Tamb. 50°C (as per label)
- MAC Address (example): 00-01-23-2E-5A-9E (specific to each unit)
- Product Version (PV): 01
- Release Level (RL): 01
- Software Version (SV): 1.0
- ASIN: B08HM54T84
7. Warranty Information
Warranty terms and conditions for the Schneider Electric LV434128 Front Display Module are provided at the time of purchase or can be obtained directly from Schneider Electric. Please retain your proof of purchase for warranty claims.
8. Customer Support
For technical assistance, product information, or to download the latest documentation, please visit the official Schneider Electric website or contact their customer support.
Schneider Electric Contact: schneider-electric.com/contact
You can also visit the official Schneider Electric store on Amazon for more products and information: Schneider Electric Amazon Store
