AEG Ergorapido CX7-2-45MÖ 2-in-1 Cordless Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the AEG Ergorapido CX7-2-45MÖ 2-in-1 Cordless Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.

The AEG Ergorapido CX7-2-45MÖ is a versatile, bagless 2-in-1 cordless vacuum cleaner designed for flexible cleaning throughout your home and car. It features a removable handheld unit, LED front lights, and a brushroll-clean function for convenient maintenance.

2. Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• This appliance is for household use only. Do not use it outdoors or on wet surfaces.
• Do not allow children to operate the vacuum cleaner. Close supervision is necessary when used near children.
• Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without the dust container and filter in place.
• Use only manufacturer's recommended attachments.
• Unplug the charger from the outlet when not in use and before cleaning.
• Do not handle the charger or appliance with wet hands.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

3. Package Contents

Verify that all items are present in the package:

• 1x AEG Ergorapido CX7-2-45MÖ 2-in-1 Cordless Vacuum Cleaner
• 1x Free-standing Charging Station
• 1x Integrated Furniture Brush/Mini Crevice Nozzle (located on charging station)
• 1x Filter (pre-installed in the device)

4. Setup and Initial Charging

4.1 Assembly

The AEG Ergorapido CX7-2-45MÖ typically comes partially assembled. Follow these steps to complete the assembly:

1. Carefully remove all components from the packaging.
2. Insert the handle into the main body of the vacuum cleaner until it clicks securely into place.
3. Ensure the dust container and filter are correctly installed.

Figure 4.1: The fully assembled AEG Ergorapido CX7-2-45MÖ cordless vacuum cleaner.

Figure 4.2: The 2-in-1 design showing the main stick vacuum and the detachable handheld unit.

4.2 Charging the Battery

Before first use, fully charge the vacuum cleaner for approximately 4 hours. The intelligent charging system includes a charging stop function to prevent overcharging.

1. Place the charging station on a flat, stable surface near a power outlet.
2. Plug the charging station's adapter into a wall outlet.
3. Place the vacuum cleaner onto the charging station. Ensure it is properly seated and the charging indicator light illuminates.
4. Allow the vacuum to charge until the indicator light shows a full charge (refer to your specific model's light indicators for details).

Figure 4.3: The vacuum cleaner docked in its free-standing charging station.

5. Operating Instructions

5.1 Powering On/Off and Suction Modes

• To turn on the vacuum cleaner, press the power button located on the handle.
• Press the power button again to switch between ECO mode (standard suction, longer runtime) and Power mode (maximum suction, shorter runtime).
• To turn off the vacuum cleaner, press the power button until the unit powers down.

Figure 5.1: Using the AEG Ergorapido for floor cleaning.

5.2 Using the 2-in-1 Function (Handheld Vacuum)

The integrated handheld unit provides flexibility for cleaning smaller areas, upholstery, or inside vehicles.

1. To detach the handheld unit, press the release button located on the main body and pull the handheld unit upwards.
2. Attach the integrated furniture brush/mini crevice nozzle (stored on the charging station) to the handheld unit for specific cleaning tasks.
3. To reattach, align the handheld unit with the main body and push it down until it clicks into place.

Figure 5.2: Detaching the handheld unit for versatile cleaning.

Figure 5.3: The handheld unit is ideal for cleaning stairs and hard-to-reach areas.

5.3 LED Front Lights

The motor-powered electric suction brush is equipped with LED front lights. These lights illuminate the cleaning path, making dust and debris more visible, especially in dimly lit areas or under furniture.

Figure 5.4: LED front lights enhance visibility during cleaning.

5.4 Free-standing Parking Function

The vacuum cleaner can stand upright on its own, allowing for convenient temporary storage during cleaning breaks. Simply push the vacuum into an upright position, and it will remain standing.

Figure 5.5: The vacuum cleaner utilizing its free-standing parking function.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

6.1 Emptying the Dust Container

Empty the dust container regularly, preferably after each use, or when the MAX fill line is reached.

1. Ensure the vacuum cleaner is turned off.
2. Detach the handheld unit.
3. Locate the dust container release button and press it to remove the dust container.
4. Open the dust container and empty its contents into a waste bin.
5. Reattach the dust container and handheld unit securely.

6.2 Cleaning the Filter

The filter should be cleaned regularly to maintain suction power. It is recommended to clean the filter every 5-10 uses, or as needed.

1. Remove the dust container as described above.
2. Carefully remove the filter from the dust container.
3. Tap the filter gently over a waste bin to dislodge dust and debris. For a more thorough clean, rinse the filter under lukewarm running water.
4. Allow the filter to air dry completely for at least 24 hours before reinserting it. Do not use the vacuum with a wet filter.
5. Reinsert the dry filter into the dust container and reattach the dust container.

6.3 Cleaning the Brush Roll (Brushroll-Clean Function)

The AEG Ergorapido CX7-2-45MÖ features a patented brushroll-clean function to easily remove tangled hair and fibers from the brush roll.

1. Ensure the vacuum cleaner is turned on and in an upright position.
2. Place the foot on the brushroll-clean pedal (usually located on the floor nozzle).
3. Press and hold the pedal for approximately 5 seconds. The brush roll will automatically clean itself.
4. Release the pedal. The brush roll is now clean.

For manual cleaning or if the brushroll-clean function is insufficient:

1. Turn off the vacuum cleaner.
2. Locate the brush roll access cover on the bottom of the floor nozzle.
3. Open the cover and carefully remove the brush roll.
4. Remove any tangled hair or debris using scissors or your hands.
5. Reinsert the brush roll and close the cover securely.

7. Troubleshooting

If you encounter issues with your vacuum cleaner, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact AEG customer support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official AEG website. If you require technical assistance, spare parts, or have any questions not covered in this manual, please contact AEG customer support.

You can typically find contact details for customer support on the AEG official website or on your product packaging.