1. Introduction
This manual provides detailed instructions for the safe and effective use of your UAYESOK Mobile Transceiver Car Charger Cable. This 12V DC power cord is designed to connect your mobile radio to a vehicle's cigarette lighter socket, providing stable power with an integrated LED indicator.
2. Safety Information
WARNING:
- Always use this product at its rated voltage of DC 12V. Using an incorrect voltage may damage your radio and the power cord.
- Ensure the cigarette lighter socket in your vehicle is clean and free from debris before inserting the plug.
- Do not attempt to modify or disassemble the power cord. This may void the warranty and pose a safety risk.
- Keep the cable away from water, excessive heat, and sharp objects.
- Disconnect the power cord from the cigarette lighter socket when not in use for extended periods.
3. Package Contents
- 1 x UAYESOK DC 12V Mobile Radio Car Charger Power Cord Cable
4. Features
- Connector Type: Standard Cigarette Lighter Plug
- Rated Voltage: 12V DC
- Rated Power: 50W
- Cable Length: Approximately 40 inches (106 cm)
- LED Indicator: Shows the current power status for safe and convenient use.
- Durable Construction: Made with high-quality materials for stable power delivery.
- Compatibility: Designed for various mobile radio models (see Section 10).
5. Setup Instructions
Follow these steps to connect your UAYESOK Mobile Transceiver Car Charger Cable to your mobile radio and vehicle.
Step 1: Identify Connectors
Locate the cigarette lighter plug and the radio connector on the power cord. The radio connector is typically a white, rectangular plug.
Figure 1: Overview of the UAYESOK Mobile Transceiver Car Charger Cable, showing the cigarette lighter plug, cable, and radio connector.
Step 2: Connect to Mobile Radio
Carefully align the white radio connector of the power cord with the corresponding power input port on your mobile radio. Push firmly until it clicks into place, ensuring a secure connection.
Figure 2: Detailed view of the radio connector, which connects to your mobile transceiver.
Step 3: Connect to Vehicle Power
Insert the cigarette lighter plug into your vehicle's 12V DC cigarette lighter socket. Ensure it is fully inserted for proper contact.
Figure 3: The cigarette lighter plug features a red LED indicator that illuminates when power is supplied.
Visual Setup Guide
For a visual demonstration of the connection process, please watch the video below:
Video 1: This video demonstrates how to connect the UAYESOK Mobile Transceiver Power Cord to a mobile radio and a vehicle's power source.
6. Operating Instructions
Once the power cord is securely connected to both your mobile radio and the vehicle's cigarette lighter socket, the integrated LED light on the cigarette lighter plug will illuminate, indicating that power is being supplied to your radio. You can now operate your mobile radio as usual.
- LED Indicator: A lit LED signifies active power supply. If the LED does not light up, check all connections and ensure the vehicle's power socket is functional.
- Power On/Off: The power cord provides continuous 12V DC power when connected. Use your mobile radio's power button to turn it on or off.
7. Maintenance
- Cleaning: Use a dry, soft cloth to clean the cable and connectors. Do not use liquid cleaners.
- Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors. If damage is found, discontinue use and replace the cable.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to radio / LED not lit |
|
|
| Radio not functioning correctly |
|
|
9. Specifications
| Specification | Detail |
|---|---|
| Model Number | TW-power cord |
| Connector Type | Cigarette Lighter Plug |
| Rated Voltage | 12V DC |
| Rated Power | 50W |
| Amperage | 4.17 Amps |
| Cable Length | 40 inches (106 cm) |
| Item Weight | 1.76 ounces (50g) |
| Special Feature | Charging Indicator (LED) |
10. Compatible Mobile Radio Models
This power cord is compatible with a wide range of mobile radio models, including but not limited to:
For Yaesu Mobile Radios:
- FT-119, FTM-400, FTM-400XDR
- FT-1802, FT-1807, FT-8800, FT-7800R
- FT-7900R, FT-8900R, FT-1802M, FT-1807M
- FT-1907M, FT-8800R, FT-2400, FT-2500
- FT-2600, FT-2800M, FT-2980
For Icom Mobile Radios:
- IC-F1610, IC-F2610, IC-F1010, IC-F2010
- IC-F110S, IC-F210S, IC-F111S, IC-F211S
- IC-F510, IC-F521, IC-F610, IC-F620TR
- IC-F621TR, IC-FR3000, IC-FR4000
- IC-F1721, IC-F2721, IC-F5021, IC-F5061D
- IC-F6021, IC-F6061D, IC-F9511, IC-F9521
- ID-880, 2730A, 2820H
For Kenwood Mobile Radios:
- TM-461A, TM-231, TM-241, TM-271A
- TM-281, TM-471A, TK-768G, TK-868G
- TM-201B, TM-261A, TM-271, TM-461/471
- TM-401B, TM-742A, TM-2530A, TM-2550A
- TM-2550E, TM-2570A, TM-D700A, TM-G707A
- TM-V7A, TR-751A, TR-751E, TM-231, TM-241
- TM-731, TM-732, TM-733, TM-741, TM-V7
- TM-G707, TM-D700, TK-7108, TK8108
- TK-885, TK-980
Other Compatible Models:
- BTECH: UV-25X4, UV-25Z2, GMRS-50x1
- Alinco: DR-735T, DR-135T, DR-112
- Radioddity: DB25, DB20-G, DB50
- AnyTone: 578, AT-778uv
- QYT: KT-8900, KT-8900D, KT-980 PLUS, KT-7900D, KT-5800, UV25x2, UV25x4
- Retevis: RT95
- TYT: TH-9800
11. Warranty and Support
UAYESOK products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the documentation provided with your purchase or contact UAYESOK customer support. If you encounter any issues or have questions regarding the use of this product, please reach out to our support team for assistance.
Contact information for support can typically be found on the product packaging or the official UAYESOK website.
