LEPOWER Solar Security Lights User Manual

Introduction

Thank you for choosing the LEPOWER Solar Security Light. This manual provides detailed instructions for the installation, operation, and maintenance of your new solar-powered motion sensor flood light. Designed for outdoor use, this light offers bright illumination, energy efficiency, and reliable motion detection for enhanced security around your home or property.

Safety Information

• Read all instructions carefully before installation and operation.
• Ensure the solar panel is placed in an area that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging.
• Do not disassemble or modify the product. This may void the warranty and pose safety risks.
• Keep the product away from fire or extreme heat sources.
• This product is IP65 waterproof, suitable for outdoor use, but do not immerse it in water.
• Use appropriate tools and safety gear during installation. If unsure, consult a qualified electrician.

Package Contents

• LEPOWER Solar Security Light (Main Unit with 2 adjustable heads and motion sensor)
• Solar Panel with 15-foot cable
• Mounting Screws and Wall Plugs
• User Manual

Image: The LEPOWER Solar Security Light, showing the main light unit with two adjustable heads and a separate solar panel connected by a cable.

Product Overview

The LEPOWER Solar Security Light features two adjustable LED light heads, a motion sensor, and a separate solar panel for flexible installation.

Image: A detailed view of the light head, highlighting the internal LED lamp beads and the optical filter lens designed for softer, more effective illumination.

Key Components:

• Adjustable Light Heads: Two heads can be angled to cover desired areas.
• Motion Sensor: Detects movement up to 72 feet within a 180° detection angle.
• Solar Panel: Monocrystalline silicon panel for efficient charging, even in low light.
• Stepless Adjustable Switch: Allows fine-tuning of motion sensor sensitivity and light duration.

Image: An illustration of the solar security light installed on a house, with the solar panel positioned on the roof to capture sunlight and the light unit illuminating the backyard, demonstrating its solar-powered operation.

Setup and Installation

The LEPOWER Solar Security Light is designed for easy installation without the need for main power wiring.

Choosing a Location:

• Solar Panel: Select a location for the solar panel that receives direct sunlight for at least 6-8 hours daily. Avoid shaded areas from trees, buildings, or other obstructions.
• Light Unit: Mount the light unit in the desired area for illumination, ensuring the motion sensor faces the area you wish to monitor. Consider the 15-foot cable length for optimal placement flexibility.

Image: A diagram illustrating proper installation, showing the motion sensor facing outwards when mounted under an eave, and an incorrect installation where the sensor is blocked.

Installation Steps:

1. Mount the Light Unit: Using the provided screws and wall plugs, securely mount the light unit to a wall or eave. Ensure the mounting surface is stable.
2. Mount the Solar Panel: Position the solar panel in your chosen sunny location. Use the provided screws to secure it.
3. Connect the Cable: Connect the 15-foot cable from the solar panel to the light unit. Ensure the connection is secure.
4. Adjust Light Heads: Angle the two light heads to cover the desired illumination area.
5. Adjust Motion Sensor: Adjust the motion sensor's angle to optimize detection range and coverage.

Image: The solar security light mounted on the exterior of a house, demonstrating its simple installation process without visible wiring.

Operating Instructions

The LEPOWER Solar Security Light features a stepless adjustable switch to control its operational modes and settings.

Image: A visual representation of the three convenient operational modes: Auto mode (light up between 10s-120s), Normally on mode (stays on about 50min after full charge), and Test mode (comes on for about 7s for testing).

Operational Modes:

• Auto Mode: In this mode, the light will activate when motion is detected and stay on for a duration between 10 to 120 seconds (adjustable). This is the primary energy-saving mode.
• Normally On Mode: The light will stay on for approximately 50 minutes after a full charge. This mode is suitable for continuous illumination for a limited period.
• Test Mode: The light will come on for about 7 seconds when motion is detected, regardless of day or night. This mode is useful for testing the motion sensor's range and light coverage during installation.

Adjusting Settings:

The stepless adjustable switch allows you to fine-tune the motion sensor's sensitivity and the light's duration in Auto Mode. Rotate the dial to increase or decrease the desired setting.

Image: A close-up of the motion sensor unit, showing the adjustable dial for sensitivity (Max 72 Feet) and the 180° sensing angle.

Maintenance

• Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures optimal charging efficiency.
• Battery: The product uses built-in Lithium Ion batteries. These are designed for long life (up to 50,000 hours of light lifespan). No user maintenance or replacement of batteries is typically required.
• Inspection: Periodically check the light unit and solar panel for any physical damage or loose connections.

Troubleshooting

Specifications

• Model: YY01C-BR
• Brightness: 1000 Lumens
• Color Temperature: 5500K (White Light)
• Power Source: Solar Powered
• Wattage: 4.44 watts
• Motion Sensor Range: Up to 72 feet
• Detection Angle: 180°
• Water Resistance: IP65 Waterproof
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Product Dimensions: 10"L x 8.5"W x 4.8"H
• Item Weight: 2.2 Pounds
• Batteries: 2 Lithium Ion batteries (included)
• Average Battery Life: 50,000 Hours (LED lifespan)
• Cable Length (Solar Panel): 15 feet
• Certifications: FCC Listed & ETL Listed

Image: A technical drawing showing the dimensions of the LEPOWER Solar Security Light unit, including length, width, and height measurements.

Warranty and Support

LEPOWER provides a 1-year warranty for this product, covering defects in materials and workmanship from the date of purchase.

To Claim Warranty or for Support:

• Please retain your proof of purchase.
• Contact LEPOWER customer service through the retailer's platform or visit the official LEPOWER website for contact information.
• Provide your product model number (YY01C-BR) and a detailed description of the issue.

For more information and product updates, visit the LEPOWER Brand Store on Amazon.