1. Product Overview
The LEDVANCE SMART+ WiFi Remote Control provides convenient wireless control for compatible LEDVANCE SMART+ WiFi products. This remote allows you to switch devices ON/OFF and adjust brightness without needing a smartphone app or voice commands for daily operation.
Package Contents:
- 1 x LEDVANCE SMART+ WiFi Remote Control
Image 1.1: The LEDVANCE SMART+ WiFi Remote Control, showing its white, ergonomic design with ON, OFF, and dimming buttons.
Image 1.2: The LEDVANCE SMART+ WiFi Remote Control displayed alongside its retail packaging, highlighting the product and its box.
2. Safety Information
- Keep the device away from water and moisture.
- Do not expose to extreme temperatures.
- Use only AAA batteries as specified. Ensure correct polarity when inserting batteries.
- Do not mix old and new batteries, or different types of batteries.
- Dispose of used batteries according to local regulations.
- Do not attempt to open or repair the device. Refer servicing to qualified personnel.
3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide or gently pry open the cover.
- Insert two (2) AAA batteries, ensuring the correct positive (+) and negative (-) orientation.
- Replace the battery compartment cover securely.
3.2 Pairing with SMART+ WiFi Products
The LEDVANCE SMART+ WiFi Remote Control operates by directly pairing with compatible SMART+ WiFi products. The LEDVANCE SMART+ WiFi app is required only for the initial configuration of your SMART+ WiFi products, not for the remote control itself.
- Ensure your SMART+ WiFi product (e.g., light bulb, plug) is powered on and within range of the remote control.
- Refer to the specific instructions for your SMART+ WiFi product for its pairing mode. Typically, this involves switching the device ON/OFF a few times to enter pairing mode.
- Once the SMART+ WiFi product is in pairing mode, press and hold the 'ON' button on the remote control for approximately 5-10 seconds until the product responds (e.g., flashes, changes color).
- Release the button. The remote control should now be paired with the SMART+ WiFi product.
- Repeat this process for up to 15 compatible SMART+ WiFi products you wish to control with this remote.
Note: This remote control is designed to work with SMART+ WiFi products that explicitly state compatibility with a remote control.
4. Operating Instructions
The remote control features intuitive buttons for basic control of your paired SMART+ WiFi products.
Image 4.1: A close-up view of the remote control, clearly showing the 'ON', 'OFF', and dimming buttons.
- ON Button: Press to turn on the paired SMART+ WiFi products.
- OFF Button: Press to turn off the paired SMART+ WiFi products.
- Dimming Buttons (Sun Icon with + / -):
- Press the '+' side to increase the brightness of the paired products.
- Press the '-' side to decrease the brightness of the paired products.
The remote can control up to 15 compatible SMART+ WiFi products simultaneously once paired.
Image 4.2: A father and daughter using the LEDVANCE SMART+ WiFi Remote Control to adjust lighting in a home hallway, demonstrating ease of use.
Image 4.3: A living room illuminated with various colored smart lighting, showcasing the potential effects controllable by the remote.
Image 4.4: A modern kitchen featuring warm, adjustable smart lighting, illustrating how the remote can enhance ambiance.
5. Maintenance
5.1 Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
5.2 Battery Replacement
If the remote control's range decreases or it becomes unresponsive, the batteries may need to be replaced. Follow the battery installation steps in Section 3.1.
6. Troubleshooting
- Remote not responding:
- Check if the batteries are correctly inserted and have sufficient charge. Replace if necessary.
- Ensure the remote is within range of the SMART+ WiFi product.
- Verify that the SMART+ WiFi product is powered on.
- Re-attempt the pairing process (Section 3.2).
- Difficulty pairing:
- Ensure the SMART+ WiFi product is in its pairing mode as per its own instructions.
- Confirm that the SMART+ WiFi product is compatible with this remote control.
- Try pairing one device at a time to isolate any potential interference.
- Limited range:
- Replace batteries.
- Ensure there are no significant obstructions (e.g., thick walls, large metal objects) between the remote and the controlled device.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | LEDVANCE |
| Model Number | 4058075526938 |
| Color | White |
| Connectivity | Wi-Fi |
| Special Features | Wireless |
| Material | Polypropylene |
| Compatible Devices | LEDVANCE SMART+ WiFi compatible products |
| Batteries Required | 2 AAA batteries (not included) |
| Manufacturer | LEDVANCE |
| Country of Origin | Germany |
8. Warranty and Support
For warranty information or technical support, please refer to the official LEDVANCE website or contact LEDVANCE customer service directly. Keep your purchase receipt for warranty claims.
