1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the QuMax A240M integrated outdoor multi-band high-power LTE directional antenna with outdoor Wi-Fi omni antenna. This device is designed to house a Teltonika RUT240 or RUT230 router (sold separately) within its IP67 enclosure, offering an all-in-one solution for robust connectivity.
The QuMax A240M is optimized for long-distance connections to base stations, making it an ideal choice for fixed installations in industrial environments.
2. Safety Information
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in injury, damage to the device, or voiding the warranty.
- Ensure the power supply is disconnected before performing any installation or maintenance.
- Installation should be performed by qualified personnel.
- Do not open the enclosure unless specifically instructed to do so for router installation.
- Operate the device within the specified temperature range: -40°C to 75°C (-40°F to 167°F).
- Ensure proper grounding of the antenna system.
3. Package Contents
Verify that all components are present before beginning installation:
- QuMax A240M Antenna Unit
- Mounting Kit (U-bolts, brackets, nuts, washers)
- Grounding Cable
- Cable Gland
- Note: Teltonika RUT240 or RUT230 router is NOT included and must be purchased separately.
4. Setup and Installation
4.1. Router Installation into Enclosure
The QuMax A240M is designed to integrate a Teltonika RUT240 or RUT230 router directly inside its IP67 rated enclosure. This provides a compact and weather-resistant solution.
- Carefully open the QuMax enclosure.
- Mount the Teltonika RUT240/230 router inside the designated space within the enclosure. Ensure it is securely fastened.
- Connect the internal antenna cables from the QuMax unit to the corresponding LTE and Wi-Fi antenna ports on the Teltonika router. For RUT230, one LTE antenna port will remain unplugged as it is a single LTE antenna router.
- Route the Ethernet and power cables through the provided cable gland, ensuring a watertight seal once tightened.
- Close the enclosure securely, ensuring the seal is properly seated to maintain IP67 rating.
4.2. Mounting the Antenna
The QuMax A240M is designed for pole mounting. Choose a location with a clear line of sight to the cellular base station for optimal LTE performance and good Wi-Fi coverage.
Image: The QuMax A240M antenna unit, showing the robust mounting bracket and the internal compartment designed for the Teltonika RUT240/230 router. Visible are the internal antenna connections, grounding wire, and cable gland for external wiring.
- Attach the mounting bracket to the back of the QuMax antenna unit using the provided hardware.
- Secure the antenna unit to a sturdy pole using the U-bolts and nuts. Ensure the antenna is firmly attached and cannot rotate or shift in strong winds.
- Adjust the antenna's direction to point towards the nearest LTE base station for maximum signal strength. Use the router's signal strength indicators for precise alignment.
4.3. Grounding
Proper grounding is crucial for protection against lightning and static discharge.
- Connect the provided grounding cable to the grounding point on the QuMax enclosure.
- Connect the other end of the grounding cable to a reliable earth ground. Consult local electrical codes for proper grounding procedures.
5. Operating Instructions
Once the Teltonika router is installed and the QuMax antenna is mounted and powered, the system will begin operation.
- Power On: Connect the power supply to the Teltonika router via the cable gland. The router will boot up, and the integrated LTE and Wi-Fi antennas will become active.
- LTE Connectivity: The directional LTE antenna will provide enhanced signal reception. Monitor the router's web interface for signal strength (RSRP, RSRQ, SINR) to confirm optimal performance.
- Wi-Fi Connectivity: The omni-directional Wi-Fi antennas will broadcast the Wi-Fi network from the Teltonika router. Connect your devices to the router's Wi-Fi network as usual.
- Router Configuration: All network configurations (APN settings, Wi-Fi SSID/password, firewall rules, etc.) are managed through the Teltonika router's web interface. Refer to the Teltonika router's specific user manual for detailed configuration instructions.
6. Maintenance
The QuMax A240M antenna is designed for minimal maintenance due to its robust IP67 rating.
- Periodic Inspection: Periodically inspect the antenna and mounting hardware for any signs of physical damage, corrosion, or loose connections.
- Cleaning: If necessary, gently clean the exterior of the enclosure with a damp cloth. Do not use harsh chemicals or abrasive materials.
- Cable Gland Check: Ensure the cable gland remains tightly sealed to maintain the IP67 ingress protection.
- Firmware Updates: Regularly check for and apply firmware updates for your Teltonika router. This is managed through the router's web interface and is crucial for security and performance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No LTE signal or weak signal | Incorrect antenna alignment; Obstruction; SIM card issue; Router configuration. | Re-align antenna towards base station; Check for obstructions; Verify SIM card is active and correctly inserted; Check router APN settings. |
| No Wi-Fi signal | Wi-Fi disabled in router; Router malfunction. | Ensure Wi-Fi is enabled in Teltonika router settings; Restart router. |
| Device not powering on | No power to router; Faulty power supply. | Check power connection to router; Test power supply. |
| Water ingress in enclosure | Improperly sealed enclosure; Loose cable gland. | Ensure enclosure lid is properly closed and sealed; Tighten cable gland. |
For further troubleshooting, refer to the Teltonika RUT240/230 router's official documentation or contact QuWireless support.
8. Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | A240M |
| LTE Frequency Range | 0.694-0.96 GHz, 1.7-2.2 GHz, 2.2-2.7 GHz |
| LTE Gain | 4 dBi (0.694-0.96 GHz), 5 dBi (1.7-2.2 GHz), 6 dBi (2.2-2.7 GHz) |
| Wi-Fi Frequency Range | 2.40-2.50 GHz, 4.70-6.00 GHz |
| Wi-Fi Gain | 6 dBi (2.40-2.50 GHz), 7 dBi (4.70-6.00 GHz) |
| Ingress Protection | IP67 |
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
| Materials | ABS, aluminum, PTFE, Fiberglass |
| Product Dimensions | 8 x 6 x 2 inches |
| Item Weight | 12 pounds |
| UPC | 797079128567 |
9. Warranty Information
QuWireless products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official QuWireless website or contact their customer support. Keep your proof of purchase for warranty claims.
Note: This warranty typically covers manufacturing defects and does not cover damage caused by improper installation, misuse, or environmental factors beyond the product's specifications.
10. Customer Support
If you require further assistance or have questions not covered in this manual, please contact QuWireless customer support:
- Website: www.quwireless.com (Please check the official website for the most current contact information.)
- Email: Refer to the website for support email addresses.
- Phone: Refer to the website for support phone numbers.
When contacting support, please have your product model number (A240M) and purchase details ready.
