HJC XD-15
Contents
HJC XD-15 Dark Smoke Visor User Manual
Model: XD-15
Product Overview
The HJC XD-15 Dark Smoke Visor is a high-quality replacement visor designed for HJC helmets. Manufactured to the same rigorous standards as HJC helmets, this visor allows for easy and stylish customization. It features a dark smoke tint for glare reduction and is scratch-resistant, ensuring durability and clear vision.
This visor is specifically compatible with HJC I40 helmets.

Image: A dark smoke tinted visor for HJC helmets, designed to reduce glare and provide UV protection. The visor is curved, with mounting points visible at the top corners.
Setup and Installation
Installing the HJC XD-15 Visor is a straightforward process. Ensure your helmet is clean and free of debris before installation.
- Preparation: Open your helmet's existing visor to its fully open position.
- Removal of Old Visor (if applicable): Locate the quick-release mechanisms or screws on both sides of your helmet that secure the current visor. Follow your helmet's specific instructions for visor removal. Typically, this involves pressing a button or lever and gently pulling the visor away from the helmet.
- Aligning the New Visor: Take the HJC XD-15 Dark Smoke Visor and align its mounting points with the corresponding slots on your helmet.
- Securing the Visor: Gently push the visor into place until you hear a click or feel it securely lock into the mechanism on both sides. Ensure both sides are properly engaged.
- Testing: Once installed, slowly open and close the visor a few times to ensure it operates smoothly and locks securely in both open and closed positions. Check for any gaps or misalignment.
Note: Refer to your specific HJC I40 helmet manual for detailed instructions on visor removal and installation, as mechanisms may vary slightly.
Operating Instructions
The HJC XD-15 Dark Smoke Visor functions like any standard helmet visor, providing protection and enhancing visibility.
- Opening and Closing: Use the tab or lip on the bottom edge of the visor to smoothly raise or lower it. The visor is designed to click into various detent positions, allowing for partial opening or full closure.
- Dark Smoke Tint: The dark smoke tint is intended for use in bright, sunny conditions to reduce glare and eye strain. It is not recommended for use at night or in low-light conditions, as it significantly reduces visibility. Always ensure adequate visibility for safe riding.
- Scratch Resistance: While the visor is scratch-resistant, it is not scratch-proof. Avoid abrasive materials when cleaning and handle with care to maintain its optical clarity.
Maintenance and Care
Proper maintenance will extend the life and clarity of your HJC XD-15 Dark Smoke Visor.
- Cleaning:
- Use only mild soap and lukewarm water, or a specialized helmet visor cleaner.
- Apply the cleaning solution with a soft, lint-free microfiber cloth.
- Gently wipe the surface. Do not scrub or use abrasive cleaners, as this can damage the scratch-resistant coating.
- Rinse thoroughly with clean water and air dry, or gently pat dry with another clean, soft microfiber cloth.
- Storage: When not in use, store the visor in a protective bag or case to prevent scratches and dust accumulation. Avoid exposing it to extreme temperatures or direct sunlight for prolonged periods.
- Inspection: Periodically inspect the visor for any signs of damage, deep scratches, or cracks that could impair vision or compromise safety. Replace the visor if significant damage is present.
Troubleshooting
Common issues and their solutions for the HJC XD-15 Dark Smoke Visor.
| Problem | Possible Cause | Solution |
|---|---|---|
| Visor does not close properly or feels loose. | Improper installation; mounting points not fully engaged. | Remove and re-install the visor, ensuring both sides click securely into place. Check for any obstructions in the mounting mechanism. |
| Scratches appear on the visor surface. | Abrasive cleaning materials; improper handling; impact. | Always use soft cloths and mild cleaners. Store the visor in a protective bag. If scratches impair vision, replace the visor. |
| Reduced visibility in low light. | Dark smoke tint is not suitable for low light. | Switch to a clear visor for night riding or low-light conditions. The dark smoke visor is for bright daylight use only. |
Specifications
| Feature | Detail |
|---|---|
| Model | XD-15 |
| Color | Dark Smoke |
| Compatibility | HJC I40 Helmets |
| Material Feature | Scratch-resistant |
| Accessory Type | Original HJC accessory |
| Manufacturer Reference | 30091503 |
| Product Dimensions | 15 x 12 x 9 cm (approx. 5.9 x 4.7 x 3.5 inches) |
| Product Weight | 300 g (approx. 0.66 lbs) |
| First Available Date | September 11, 2020 |
Warranty and Support
As an original HJC accessory, this product is covered by HJC's standard warranty policy. For specific warranty details, claims, or technical support, please refer to the official HJC website or contact HJC customer service directly.
Keep your purchase receipt as proof of purchase for any warranty claims.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.