Introduction
This instruction manual provides essential information for the safe and effective use of your OMNIHIL 15 Feet Long AC Power Cord. This high-quality power cord is designed to provide reliable power to compatible devices, such as the JBL EON 515. Please read this manual thoroughly before use and retain it for future reference.
Image: The OMNIHIL 15-foot AC Power Cord, coiled for storage, showcasing its length and standard connectors.
Safety Information
Always observe the following safety precautions to prevent injury or damage to the product and connected devices:
- Ensure the power cord is fully inserted into both the power outlet and the device's power input.
- Do not use the power cord if it is damaged, frayed, or has exposed wires.
- Avoid placing heavy objects on the cord or running it through high-traffic areas where it could be tripped over or damaged.
- Do not attempt to modify or repair the power cord. Refer to qualified personnel for any issues.
- Keep the power cord away from water, excessive heat, and direct sunlight.
- This product is designed for indoor use only.
Setup
Setting up your OMNIHIL AC Power Cord is straightforward:
- Identify Connectors: Locate the male plug (Type B, 3-prong) and the female connector (IEC C13) on the power cord.
- Connect to Device: Insert the female IEC C13 connector firmly into the corresponding power input port on your compatible device (e.g., JBL EON 515). Ensure a snug fit.
- Connect to Power Outlet: Insert the male Type B plug firmly into a standard, grounded AC power outlet.
- Verify Connection: Ensure both ends of the cord are securely connected before powering on your device.
Operating Instructions
Once the OMNIHIL AC Power Cord is properly connected to your device and a power outlet, the device will receive electrical power. Operate your device according to its own instruction manual. The power cord itself does not require any specific operational steps beyond proper connection.
Maintenance and Care
Proper care will extend the life of your power cord:
- Cleaning: Disconnect the power cord from both the device and the power outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use, coil the power cord loosely. Avoid tight coiling or kinking, which can damage the internal wires. Store in a cool, dry place away from direct sunlight.
- Inspection: Periodically inspect the cord for any signs of wear, cuts, or damage to the insulation or connectors. If damage is found, discontinue use immediately.
Troubleshooting
If you experience issues with your power cord, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Cord not fully inserted. | Ensure both ends of the cord are firmly seated. |
| Device not powering on. | Power outlet issue. | Test the outlet with another known working device. Check circuit breaker. |
| Device not powering on. | Damaged power cord. | Inspect the cord for visible damage. If damaged, discontinue use and replace. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 3 x 3 x 2 inches (packaged) |
| Item Weight | 5 ounces |
| Item Model Number | OMNI0904020219 |
| Brand | OMNIHIL |
| Connector Gender | Male-to-Female |
| Plug Format | Type B (US Standard 3-prong) |
| UL Listed | Yes |
| Item Length | 180 Inches (15 Feet) |
| Certifications | UL, ROHS |
Warranty and Support
OMNIHIL provides a 5-Year Free Replacement Warranty for this product. This warranty covers manufacturing defects and ensures your satisfaction with the product's performance under normal use.
Image: OMNIHIL 5-Year Warranty Seal.
For warranty claims, technical support, or any inquiries regarding your OMNIHIL power cord, please contact OMNIHIL customer service through the retailer's platform or the official OMNIHIL website. Please have your product model number (OMNI0904020219) and purchase details ready when contacting support.