WISHTIME Dinosaur Track Cars Instruction Manual

1. Product Overview

The WISHTIME Dinosaur Track Cars set provides an engaging and flexible racing experience for children. This manual details the components, assembly, operation, and care of your new toy set.

What's Included

Your package contains the following items:

• 240 flexible race track pieces
• 1 electric dinosaur toy car
• 1 electric toy car
• 6 dinosaur models
• 4 trees
• 2 dinosaur heads (tunnels)
• 4 slopes

This image displays all the pieces you should find in your WISHTIME Dinosaur Track Cars set, including the flexible track segments, two cars, various dinosaur figures, trees, dinosaur head tunnels, and track slopes.

2. Setup Instructions

2.1 Assembling the Track

1. Connect Track Pieces: Interlock the flexible track pieces by aligning the tabs and slots. The track is designed to be highly flexible, allowing for various configurations.
2. Install Slopes and Bridges: Attach the slope pieces to create inclines and declines. Use the bridge supports to create elevated sections or crossovers.
3. Place Dinosaur Heads: Position the two dinosaur head pieces as tunnels or decorative elements along the track.
4. Add Scenery: Place the dinosaur models and trees around the track to create a prehistoric environment.

This image illustrates how the flexible track pieces can be connected to form features like an undulating arch bridge and a fork in the road, demonstrating the versatility of the track design.

This image shows one of the dinosaur head tunnels integrated into the track layout, with a car about to pass through, demonstrating how these elements enhance the play experience.

2.2 Battery Installation for Cars

Each electric car requires 1 AA battery (not included).

1. Locate the battery compartment on the underside of each car.
2. Using a small screwdriver (not included), open the battery compartment cover.
3. Insert 1 AA battery into each car, ensuring correct polarity (+/-).
4. Replace the battery compartment cover and secure it with the screw.

3. Operating Instructions

3.1 Running the Cars

1. Place the assembled cars onto the track.
2. Locate the ON/OFF switch on each car (usually on the top or side).
3. Flip the switch to the 'ON' position. The cars will begin to move along the track.
4. To stop the cars, flip the switch back to the 'OFF' position.

This image provides a detailed view of the off-road jeep car on the track, illustrating its design and how it interacts with the track segments.

3.2 Creating Track Layouts

The flexible track design allows for endless creative layouts. Experiment with different curves, loops, and elevations using the slopes and bridges. The track width is 2.76 inches, making it compatible with other WISHTIME 230-piece track sets for expanding your dinosaur world.

This image showcases a comprehensive track setup, complete with cars, dinosaur figures, and a large T-Rex, demonstrating the potential for imaginative play and complex track designs.

3.3 Product Demonstration Video

This video provides a visual demonstration of the WISHTIME Dinosaur Track Cars set, showing the assembly process and the cars running on the track, offering a dynamic view of the product's features and play possibilities.

4. Maintenance

4.1 Cleaning

To clean the track pieces, cars, and accessories, gently wipe them with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic.

4.2 Storage

When not in use, store the set in a cool, dry place away from direct sunlight. For prolonged storage, remove batteries from the electric cars to prevent leakage and damage.

5. Troubleshooting

5.1 Car Not Moving

• Check Batteries: Ensure batteries are correctly installed and not depleted. Replace with fresh AA batteries if necessary.
• Verify Switch Position: Make sure the ON/OFF switch on the car is in the 'ON' position.
• Inspect Wheels: Check for any obstructions (e.g., hair, debris) around the car's wheels.

5.2 Track Disconnecting

• Ensure Firm Connection: Press track pieces firmly together until they interlock securely.
• Avoid Excessive Bending: While flexible, extreme bending can cause pieces to separate. Design layouts with gentle curves.

6. Product Specifications

7. Warranty and Support

For warranty information or product support, please refer to the packaging or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.