Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your YENUO Full Extension Side Mount Drawer Slides. Please read these instructions carefully before installation and keep them for future reference. These drawer slides are designed for smooth and reliable operation in various furniture applications.
Product Overview
Key Features
- High Load Capacity: Constructed from high-density 1.2mm thick cold-rolled steel, capable of supporting up to 100 lbs (45 kg).
- Smooth & Quiet Operation: Features industrial-grade double ball bearings for effortless sliding and a rubber bumper pad to prevent collision noise and absorb shock.
- Anti-Rust & Anti-Oxidation: Treated with a special blue zinc electroplated surface for enhanced corrosion resistance.
- Three-Fold Full Extension: Allows the drawer to extend completely, providing full access to its contents.
- Detachable Design: Equipped with a plastic buckle for easy installation and removal of the drawer.
- Wide Application: Suitable for various household and office furniture drawers, including wardrobe, keyboard, cabinet, wooden, steel, and toolbox drawers.
Components Included
- 1 Pair of YENUO Full Extension Drawer Slides (20 Inch)
- 12 Mounting Screws
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your drawer slides. Please follow these steps carefully.
Pre-Installation Checks
- Slide Length: The slide length is 20 inches (500 mm).
- Fully Extended Length: The slides extend to 40 inches (1000 mm).
- Drawer Depth: Ensure your drawer has an internal depth of at least 20-22 inches.
- Clearance: A space of 0.5 inches (12.5 mm) is required between the drawer and the cabinet wall on both the left and right sides. This means the internal cabinet width minus the external drawer width should equal 1 inch (25 mm).
Installation Steps
- Separate the Slides: The drawer slides consist of three parts. Gently pull the inner rail until it detaches from the middle rail. There is a small plastic buckle at the back of the slide that allows for separation. Press this buckle to release the inner rail.
- Mount Inner Rails to Drawer: Attach the narrower inner rails to the sides of your drawer using the provided screws. Ensure they are flush and level.
- Mount Outer Rails to Cabinet: Attach the wider outer rails to the inside of your cabinet opening. Use a level to ensure they are perfectly horizontal and parallel to each other. Maintain the 0.5-inch clearance on each side.
- Insert Drawer: Align the inner rails on the drawer with the middle rails on the cabinet. Gently push the drawer into the cabinet until the slides engage. You should hear a soft click as the plastic buckle locks into place.
- Test Operation: Slowly open and close the drawer to ensure smooth movement and full extension. Adjust if necessary.
Operating Instructions
These drawer slides are designed for simple and reliable operation.
- Opening the Drawer: Pull the drawer handle to open. The three-fold full extension mechanism allows the drawer to slide out completely, providing full access to items stored at the back.
- Closing the Drawer: Push the drawer gently to close. The ball bearings ensure a smooth and quiet return. The rubber bumper pad helps absorb impact and reduces noise upon closing.
- Detaching the Drawer: To remove the drawer from the cabinet, fully extend the drawer. Locate the plastic buckle at the back of each slide (typically on the inner rail). Press the buckle (usually downwards for one side, upwards for the other) and pull the drawer forward to detach it. This is useful for cleaning or accessing the cabinet interior.
Maintenance
Regular maintenance ensures the longevity and smooth operation of your YENUO drawer slides.
- Cleaning: Wipe the slides periodically with a clean, damp cloth to remove dust and debris. Avoid abrasive cleaners.
- Lubrication: While the ball bearings are designed for long-term smooth operation, a light application of silicone-based lubricant (avoid oil-based lubricants as they can attract dust) can be applied to the moving parts if you notice any stiffness over time.
- Inspection: Periodically check all mounting screws to ensure they are tight. Loose screws can affect performance and stability.
- Load Capacity: Do not exceed the maximum load capacity of 100 lbs (45 kg) to prevent damage to the slides and drawer.
Troubleshooting
If you encounter any issues with your drawer slides, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawer sticks or is difficult to open/close. |
|
|
| Drawer makes excessive noise. |
|
|
| Drawer does not fully extend or close. |
|
|
If you are unable to resolve the issue, please contact YENUO customer support for assistance.
Specifications
| Attribute | Detail |
|---|---|
| Brand | YENUO |
| Model Number | Basic-1 pair |
| Size | 20 Inch (500 mm) |
| Product Dimensions | 50.8 x 4.5 x 1.27 cm |
| Item Weight | 1.27 Kilograms |
| Material | Alloy Steel, Rubber, Metal (Cold-rolled steel with blue zinc electroplated finish) |
| Finish Type | Zinc-plated Steel |
| Installation Type | Side Mount |
| Weight Limit | 100 pounds (45 kg) |
| Included Components | 1 pair of drawer slides, 12 mounting screws |
| Batteries Required? | No |
| Manufacturer | Foshan Yenuo Hardware Co. Limited |
| UPC | 791598449646 |
Warranty and Support
YENUO is committed to providing high-quality products. While specific warranty details are not provided in this manual, we stand by the durability and performance of our drawer slides. The slides are tested for 100,000 push-pull cycles and are designed for a service life of at least 30 years under normal use.
For any quality issues, installation questions, or further assistance, please do not hesitate to contact YENUO customer support. Our goal is to ensure your satisfaction with our products.
Contact information for support is typically found on the product packaging or the retailer's website.