Introduction
Thank you for choosing the VCM Stango Coffee Table. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
Image: The VCM Stango Coffee Table, a white wooden table with multiple storage compartments and wheels, shown with decorative items.
Safety Information
Please observe the following safety guidelines to ensure safe use of the product:
- This product is not suitable for children under 3 years of age.
- Adult supervision is required during assembly.
- Ensure the table is stable after assembly. Do not use near stairs or on uneven surfaces.
- Do not exceed the maximum weight recommendation of 40 kg.
- Avoid placing hot items directly on the surface without protection.
- Keep small parts out of reach of children during assembly to prevent choking hazards.
Product Overview
The VCM Stango Coffee Table is a versatile piece of furniture designed for living spaces, offering both surface area and integrated storage. Key features include:
- Material: Wood
- Dimensions: Approximately 80 cm (width) x 50 cm (depth) x 41 cm (height).
- Storage: Features multiple storage compartments (4 shelves) for books, magazines, or decorative items.
- Mobility: Equipped with four wheels for easy repositioning.
- Design: Modern, rectangular design suitable for indoor use.
Image: The VCM Stango Coffee Table integrated into a living room, highlighting its practical storage compartments.
Setup and Assembly
Assembly of the VCM Stango Coffee Table requires careful attention to detail. Please follow these general steps. Specific instructions and diagrams should be included in the packaging with your product.
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components and hardware are present according to the included parts list.
- Identify Parts: Refer to the assembly diagram to identify each panel and piece of hardware.
- Assemble Frame: Begin by connecting the main panels to form the table's structure. Ensure all connections are secure.
- Install Shelves: Insert the internal shelves into their designated slots or attach them using the provided fasteners.
- Attach Wheels: Securely attach the four wheels to the bottom panel of the table. Ensure they are firmly fastened to allow for smooth movement.
- Final Check: Once assembled, gently test the table's stability and ensure all screws and fasteners are tightened.
Image: Technical diagram illustrating the dimensions of the VCM Stango Coffee Table, useful for assembly and placement.
Operation
The VCM Stango Coffee Table is designed for ease of use in your living space.
- Mobility: The integrated wheels allow for easy movement of the table. To reposition, gently push the table. Be cautious when moving it over uneven surfaces or thresholds to prevent damage or instability.
- Storage: Utilize the four open compartments for organizing various items such as books, magazines, remote controls, or decorative objects.
- Weight Capacity: Do not place items heavier than 40 kg on the table. Distribute weight evenly across the surface and shelves.
Maintenance
Proper care will extend the life and appearance of your coffee table:
- Cleaning: Wipe the table with a dry cloth to remove dust and light dirt. For more stubborn marks, use a slightly damp cloth and immediately dry with a clean, soft cloth. Avoid abrasive cleaners or harsh chemicals.
- Protection: Use coasters under drinks and placemats under hot dishes to protect the surface from stains and heat damage.
- Inspection: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
Troubleshooting
If you encounter any issues with your VCM Stango Coffee Table, consider the following:
- Instability/Wobbling:
- Ensure all assembly screws are fully tightened.
- Verify the table is placed on a flat, even surface.
- Difficulty Moving:
- Check if the wheels are clean and free of debris.
- Ensure the wheels are securely attached and rotate freely.
- Surface Damage (Scratches/Dents):
- Minor scratches may be repairable with furniture repair kits.
- Always handle the table with care to prevent impacts.
- Missing Parts or Damage Upon Arrival:
- If parts are missing or damaged upon delivery, contact the retailer or manufacturer's customer service immediately with your purchase details.
Specifications
| Attribute | Detail |
|---|---|
| Brand | VCM |
| Model Number | 916989 |
| Product Dimensions (W x D x H) | 80 cm x 50 cm x 41 cm (Based on diagram and feature bullets. Note: Some specifications list 80 cm x 80 cm x 40 cm.) |
| Features | Storage, Wheels |
| Maximum Weight Recommendation | 40 Kilograms |
| Care Instructions | Wipe with a dry cloth |
| Shape | Rectangular |
| Base Type | Wheels |
| Indoor/Outdoor Use | Indoor |
Warranty and Support
Information regarding specific warranty terms for the VCM Stango Coffee Table is not provided in the product details. For any warranty claims, missing parts, or support inquiries, please contact your point of purchase or the VCM customer service directly. Keep your proof of purchase for any claims.
Availability of spare parts is currently unavailable according to product information.
