Fenge ED-S48102WE Electric Standing Desk User Manual

1. Introduction

Thank you for choosing the Fenge ED-S48102WE Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new desk. Designed to enhance your workspace ergonomics and productivity, this desk features electric height adjustment, memory presets, and an anti-collision system. Please read this manual thoroughly before assembly and use to ensure safe and optimal performance.

Image 1.1: The Fenge ED-S48102WE Electric Standing Desk, showcasing its sleek design and integrated control panel.

Image 1.2: Illustrates the versatility of the Fenge standing desk, allowing users to switch between sitting and standing positions for improved well-being.

2. Safety Information

• Ensure all components are securely fastened before use.
• Do not overload the desk. The maximum weight capacity is 80 kg (176.3 lbs).
• Keep children and pets away from the desk during operation.
• Ensure there are no obstructions in the desk's path during height adjustment to prevent damage or injury. The anti-collision feature will stop movement if an obstruction is detected.
• Only use the provided power adapter.
• Do not disassemble or modify the desk's electrical components. Contact customer support for service.

3. Package Contents

Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact Fenge customer support.

• Desk Top (1 piece, 110x60cm, 16mm thick)
• Desk Legs/Frame (2 pieces)
• Control Panel with Memory Function
• Power Adapter and Cables
• Reinforcement Pipe
• Height Adjustment Feet (Adjusters)
• Assembly Hardware (Screws, Allen wrench, etc.)
• Instruction Manual

4. Assembly Instructions

Follow these steps carefully to assemble your Fenge Electric Standing Desk. It is recommended to have two people for assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Desk Legs: Secure the desk legs to the underside of the desk top using the provided screws. Ensure they are aligned correctly.
3. Install Reinforcement Pipe: Attach the reinforcement pipe between the two desk legs. This enhances stability.
   

   Image 4.1: The reinforcement pipe provides additional stability to the desk frame.

4. Attach Control Panel: Mount the control panel to the underside of the desk top in an easily accessible location.
5. Connect Power and Control Cables: Connect the motor cables from the legs to the control box, and then connect the control panel cable to the control box. Finally, connect the power adapter to the control box and plug it into a power outlet.
   

   Image 4.2: Proper cable management under the desk ensures a tidy and safe setup.

6. Install Height Adjustment Feet: Screw the adjustable feet into the bottom of the desk legs. These can be adjusted to level the desk on uneven surfaces.
   

   Image 4.3: Adjustable feet allow for leveling the desk and ensuring stability.

7. Initial Power-On and Reset: After connecting all cables, plug in the desk. Perform an initial reset by pressing and holding the 'Down' button until the desk reaches its lowest position and then slightly rises. This calibrates the desk.

5. Operating Instructions

5.1. Control Panel Overview

Image 5.1: The control panel features up/down arrows, memory presets (1-4), and a 'Set' button.

• Up (▲) / Down (▼) Buttons: Press and hold to adjust the desk height manually. Release to stop.
• Memory Presets (1, 2, 3, 4): Store and recall up to four preferred height settings.
• 'S' (Set) Button: Used to save a desired height into a memory preset.

5.2. Adjusting Desk Height

• Manual Adjustment: Press and hold the Up (▲) or Down (▼) button until the desk reaches your desired height.
• Using Memory Presets: Press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

5.3. Setting Memory Presets

1. Adjust the desk to your desired height using the Up (▲) or Down (▼) buttons.
2. Press the 'S' (Set) button. The display will show 'S'.
3. Within 3 seconds, press one of the memory buttons (1, 2, 3, or 4). The current height will be saved to that preset.

5.4. Anti-Collision System

The Fenge ED-S48102WE desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly (2-3 cm) to prevent damage. Ensure the area around the desk is clear before operation, but this feature provides an extra layer of safety.

6. Maintenance

• Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
• Inspection: Periodically check all screws and connections to ensure they are tight.
• Cable Management: Ensure cables are neatly organized and not pinched or tangled, especially during height adjustments.

7. Troubleshooting

8. Specifications

Image 8.1: Detailed dimensions and height adjustment range of the Fenge ED-S48102WE desk.

9. Warranty and Support

This Fenge product comes with a 12-month warranty from the date of purchase. In case of initial defects or issues during the warranty period, please contact Fenge customer support for assistance with returns or exchanges.

For further inquiries or technical support, please refer to the contact information provided with your purchase or visit the official Fenge website.