Introduction
The BEPER P202ASP400 Car Vacuum Cleaner is a compact and practical handheld vacuum designed specifically for vehicle interiors. Weighing only 0.32 kg, it is lightweight and easy to maneuver, allowing for single-handed operation. Its ergonomic design ensures efficient cleaning without fatigue, reaching even the most uncomfortable areas of your car.
Image: The BEPER P202ASP400 Car Vacuum Cleaner, a compact and lightweight device for vehicle cleaning.
Safety Instructions
- Read all instructions before using the appliance.
- This appliance is designed for car use only and should be powered via the car's cigarette lighter socket (12V).
- Do not use the vacuum cleaner to pick up liquids, flammable or combustible materials, hot ashes, or sharp objects.
- Ensure the filter is properly installed before operation.
- Do not immerse the appliance in water or any other liquid.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Unplug the vacuum cleaner from the car's power outlet before cleaning or performing any maintenance.
- Do not operate the appliance with a damaged cord or plug.
- Keep out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
Product Overview and Components
The BEPER P202ASP400 comes with several accessories to enhance its cleaning capabilities.
Image: The main unit of the BEPER P202ASP400 car vacuum cleaner, showing the detachable dust collection bin and the included accessories: a flexible hose, a crevice tool, and a brush tool.
Components:
- Main Unit: The handheld vacuum body with integrated motor and dust collection bin.
- Power Cable with Car Adapter: Approximately 3 meters long, designed to connect to a 12V car cigarette lighter socket.
Image: The BEPER P202ASP400 main unit with its attached power cable and 12V car cigarette lighter adapter.
- Flexible Hose: Extends reach for difficult areas.
- Crevice Tool: Ideal for narrow gaps and tight spaces.
Image: The BEPER P202ASP400 vacuum cleaner with the crevice tool directly attached to the nozzle, ready for use in tight spaces.
- Brush Tool: For cleaning fabric surfaces and dislodging stubborn dirt.
Image: The BEPER P202ASP400 vacuum cleaner with the brush tool attached, suitable for cleaning upholstery and carpets.
- Washable and Removable Filter: Located inside the dust collection bin.
Setup
- Unpack: Carefully remove all components from the packaging.
- Inspect: Check the vacuum cleaner and all accessories for any signs of damage.
- Filter Check: Ensure the washable filter is correctly seated inside the dust collection bin.
Operating Instructions
- Connect Power: Insert the car adapter plug into your vehicle's 12V cigarette lighter socket.
Image: A hand inserting the car vacuum cleaner's 12V adapter into a car's cigarette lighter socket.
- Attach Accessories (Optional):
- For general cleaning of flat surfaces or large debris, you can use the vacuum without any attachment.
- For tight spaces like between seats or console gaps, attach the crevice tool.
Image: A person using the BEPER P202ASP400 with the crevice tool to clean the narrow space between a car seat and the center console.
- For upholstery, carpets, or to dislodge embedded dirt, attach the brush tool.
Image: A person using the BEPER P202ASP400 with the brush tool to clean a car seat, demonstrating its effectiveness on fabric surfaces.
- For hard-to-reach areas like under seats or pedals, use the flexible hose with either the crevice or brush tool attached to its end.
Image: The BEPER P202ASP400 vacuum cleaner being used with the flexible hose and crevice tool to clean the car floor near the pedals, showing its extended reach.
- Turn On: Locate the power switch on the main unit and slide it to the "ON" position.
- Vacuum: Move the vacuum cleaner slowly over the surfaces you wish to clean. The lightweight design allows for easy one-handed operation.
Image: A person holding the BEPER P202ASP400 vacuum cleaner and cleaning a car seat, demonstrating its ergonomic and easy-to-handle design.
Image: The BEPER P202ASP400 vacuum cleaner being used to clean dust from the air vents on a car's dashboard, highlighting its precision for detailed cleaning.
- Turn Off: Once cleaning is complete, slide the power switch to the "OFF" position.
- Disconnect Power: Remove the car adapter plug from the cigarette lighter socket.
Official Product Video:
Video: An official product video demonstrating the features and usage of the BEPER P202ASP400 Car Vacuum Cleaner. This video showcases the vacuum in action, including its portability and effectiveness in various car cleaning scenarios.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner.
Emptying the Dust Collection Bin:
- Ensure the vacuum cleaner is turned off and unplugged from the power source.
- Press the release button to detach the transparent dust collection bin from the main unit.
Image: A person demonstrating how to remove the filter from the BEPER P202ASP400 vacuum cleaner for cleaning, showing the ease of maintenance.
- Carefully remove the filter from the dust bin.
- Empty the contents of the dust bin into a waste receptacle.
Cleaning the Filter:
- The filter is washable. Rinse it under running water until clean.
- Allow the filter to air dry completely before reinserting it into the dust collection bin. Do not use the vacuum cleaner with a wet filter.
- Once dry, place the filter back into the dust bin and reattach the bin to the main unit, ensuring it clicks securely into place.
It is recommended to clean the filter after each significant use to maintain optimal suction power.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on. |
|
|
| Low suction power. |
|
|
| Unusual noise during operation. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | BEPER |
| Model Number | P202ASP400 |
| Color | Black and Green |
| Product Dimensions (L x W x H) | 32 x 10.2 x 10.7 cm |
| Weight | 470 grams |
| Power | 70 Watts |
| Voltage | 12 Volts |
| Material | Plastic |
| Sound Level | 60 dB |
| Special Features | Washable filter, Lightweight |
| Filter Type | Fabric |
| Surface Recommendation | Carpets |
| Power Source | Cigarette lighter powered |
| Cord Length | 3 Meters |
Warranty and Support
BEPER products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official BEPER website. For technical support, troubleshooting assistance beyond this manual, or to inquire about spare parts, please contact BEPER customer service.
Availability of spare parts: 10 Years.
You can find more information and contact details on the official BEPER brand store: BEPER Brand Store
