Introduction
This instruction manual provides comprehensive guidance for the Anderic RR7225T Ceiling Fan Remote Control. Designed as a direct replacement for specific Kensgrove and Altura DC ceiling fans, this remote offers precise control over fan speeds and lighting functions. Please read this manual thoroughly to ensure correct setup and operation.
Image: Angled view of the Anderic RR7225T remote control, showcasing its ergonomic design and button layout.
Compatibility
The Anderic RR7225T remote control is specifically designed for use with select Kensgrove and Altura DC ceiling fans. It replaces original remote models UC7225T, TR198A, and KUJCE10308. This remote is not a universal model and requires a compatible receiver to be already installed within your ceiling fan (receiver not included).
Compatible Fan Models Include:
- Kensgrove 54", 64", and 72" LED ceiling fans (YG493A, YG493B, YG493D, YG493E, YG493OD series)
- Fortston 60" (AM175LED-EB)
- Amaretto 70" (CL11012)
Verify your fan model number before attempting to pair the remote.
Setup
Proper setup is essential for the functionality of your Anderic RR7225T remote control.
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards to open.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the battery compartment cover.
Image: Back view of the Anderic RR7225T remote control with the battery compartment open, showing two AAA batteries inserted.
Pairing Process
The remote must be paired with your ceiling fan's receiver to function correctly.
- Ensure the ceiling fan's power is OFF at the wall switch or circuit breaker.
- Wait for approximately 10-15 seconds.
- Turn the ceiling fan's power ON at the wall switch or circuit breaker.
- Within 30 seconds of restoring power, press and hold the 'Pair' button located inside the battery compartment of the remote control. The 'Pair' button is a small, recessed button.
- Hold the 'Pair' button until the fan light flashes, indicating successful pairing. If your fan does not have a light, listen for an audible click from the fan motor.
- Test the remote's functions (fan speed, light) to confirm successful pairing.
If pairing fails, repeat the steps. Ensure the fan's power is cycled correctly and the 'Pair' button is pressed within the specified timeframe.
Operating the Remote Control
The Anderic RR7225T remote provides comprehensive control over your ceiling fan's functions.
Image: Front view of the Anderic RR7225T remote control, highlighting the layout of all control buttons.
- Power On/Off: Press the 'Power' button (top left, circular icon with a vertical line) to turn the fan and light on or off.
- Fan Speed Adjustment: Press the '+' button to increase the fan speed. Press the '-' button to decrease the fan speed. The remote supports 9 distinct fan speeds.
- Light Control: Press the 'Light' button (light bulb icon) to turn the fan light on or off. To dim the light, press and hold the 'Light' button. Release when the desired brightness level is reached.
- Fan Direction (Reverse): Press the 'Reverse' button (curved arrow icon) to change the direction of the fan blades. This function is typically used to circulate cool air downwards in summer or warm air upwards in winter.
- Timer Function: Press the 'Timer' button (clock icon with 2H, 4H, 8H) repeatedly to set the fan to turn off automatically after 2, 4, or 8 hours. The indicator light next to the selected time will illuminate.
Wall Mount
The remote includes a wall mount holder for convenient storage and access. Secure the wall mount to a desired location using appropriate hardware.
Image: The Anderic RR7225T remote control placed in its clear wall mount holder.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your remote control.
- Battery Replacement: Replace batteries when the remote's range decreases or functions become intermittent. Always replace both AAA batteries simultaneously with new ones. Do not mix old and new batteries.
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
Troubleshooting
If you encounter issues with your Anderic RR7225T remote control, refer to the following troubleshooting steps.
- Remote Not Responding:
- Check Batteries: Ensure batteries are correctly inserted and not depleted. Replace with fresh AAA batteries if necessary.
- Line of Sight: Ensure there are no obstructions between the remote and the fan's receiver.
- Range: Move closer to the fan to ensure you are within the operational range.
- Fan Not Pairing:
- Repeat Pairing Process: Follow the "Pairing Process" steps carefully, ensuring the fan's power is cycled correctly and the 'Pair' button is pressed within 30 seconds of restoring power.
- Receiver Check: Confirm that your ceiling fan has a compatible DC receiver installed. This remote will not work without the correct receiver.
- Light Not Functioning:
- Check Light Bulb: Ensure the light bulb in your fan is functional and correctly installed.
- Pairing: Verify the remote is successfully paired with the fan, as light control is part of the pairing.
- Intermittent Operation:
- Battery Level: Low battery power can cause intermittent operation. Replace batteries.
- Interference: Other electronic devices might cause interference. Try operating the remote away from potential sources of interference.
Specifications
Key specifications for the Anderic RR7225T Ceiling Fan Remote Control.
- Model Number: RR7225T
- Product Dimensions: 7 x 2 x 1 inches (17.78 x 5.08 x 2.54 cm)
- Item Weight: 2.4 ounces (68 grams)
- Batteries Required: 2 x AAA (not included)
- Compatible Devices: Ceiling Fan
- Special Feature: OEM Replacement
- Color: Black
- Manufacturer: Dan's Electronics Etc., Inc.
Warranty Information
For specific warranty details regarding your Anderic RR7225T remote control, please refer to the documentation provided at the time of purchase or contact Anderic customer support directly. Warranty terms and conditions are subject to the manufacturer's policy.
Customer Support
For further assistance, technical support, or inquiries regarding your Anderic RR7225T remote control, please contact the manufacturer.
- Brand: Anderic
- Website: www.Anderic.com
