Introduction
Thank you for choosing the Rowenta DW4345 Express Steam Iron. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your appliance. Please read these instructions carefully before first use and keep them for future reference.
Safety Instructions
Always observe the following safety precautions:
- Ensure the voltage indicated on the iron's rating plate matches your mains voltage.
- Do not leave the iron unattended while it is connected to the mains.
- Keep the iron and its cord out of reach of children.
- Never immerse the iron, cord, or plug in water or any other liquid.
- Do not operate the iron if the cord or plug is damaged, or if the iron has been dropped or damaged.
- Always unplug the iron before filling with water, emptying, or cleaning.
- Use the iron on a stable, heat-resistant surface, preferably an ironing board.
- The soleplate can become extremely hot and cause burns. Avoid contact with hot surfaces.
Product Overview
The Rowenta DW4345 Express Steam Iron features advanced technology for efficient ironing.
Image: Rowenta DW4345 Express Steam Iron, side view. This image displays the overall design of the iron, highlighting its ergonomic handle and soleplate.
- Microsteam 300 Soleplate: High non-stick effect and optimal steam distribution through over 300 micro-holes.
- Anti-Drip System: Prevents water stains on fabrics, even at low temperatures.
- Integrated Anti-Calc System: Helps maintain steam efficiency and ironing performance over time.
- Precision Tip: Designed to reach difficult areas like seams and collars.
- Water Tank: Transparent tank for easy monitoring of water level.
- Temperature Control Dial: For selecting appropriate fabric settings.
- Steam and Spray Buttons: For activating steam shot and water spray functions.
Setup
Before First Use
- Remove any stickers or protective covers from the soleplate.
- Clean the soleplate with a damp cloth.
- For the first use, iron an old piece of fabric to remove any manufacturing residues.
Filling the Water Tank
- Ensure the iron is unplugged from the mains.
- Set the steam control to the dry ironing position (no steam).
- Open the water tank inlet cover.
- Fill the tank with tap water up to the 'MAX' level indicator. Do not overfill.
- Close the water tank inlet cover securely.
Image: Rowenta Express Steam Iron resting on its heel. This view shows the iron in a stable position, making it easier to access the water tank for filling.
Operating Instructions
Temperature and Steam Settings
- Plug the iron into a suitable power outlet.
- Turn the temperature control dial to the desired setting based on the fabric type. Refer to the garment care label.
- The indicator light will illuminate, indicating the iron is heating up. It will turn off when the desired temperature is reached.
- For steam ironing, ensure the temperature setting is within the steam zone (usually indicated on the dial). Adjust the steam control lever for continuous steam output (up to 40 g/minute).
- For dry ironing, set the steam control to the 'no steam' position.
Image: Temperature control dial with fabric settings. This dial allows users to select the appropriate heat level for different materials like linen, cotton, wool, silk, and synthetics.
Image: Close-up of the steam and spray buttons. These buttons are used to activate the powerful steam shot (up to 200 g/minute) and the water spray function.
Steam Shot and Spray Function
- Steam Shot: Press the steam shot button for an extra burst of steam (up to 200 g/minute) to remove stubborn creases. Wait a few seconds between shots.
- Spray: Press the spray button to moisten fabric for easier ironing.
Vertical Steaming
The vertical steam function is ideal for removing creases from hanging garments, delicate fabrics, or curtains.
- Hang the garment on a hanger.
- Set the iron to maximum temperature.
- Hold the iron vertically a few centimeters away from the fabric and press the steam shot button repeatedly.
Image: User ironing a blue and white striped shirt. This image demonstrates the iron in active use, producing steam for effective crease removal.
Auto-Off Feature
For safety and energy saving, the iron is equipped with an automatic shut-off feature:
- If left stationary on its heel, the iron will turn off after approximately 8 minutes.
- If left stationary on its soleplate or side, the iron will turn off after approximately 30 seconds.
- To restart the iron, simply move it.
Maintenance
Cleaning the Iron
- Always unplug the iron and allow it to cool completely before cleaning.
- Wipe the soleplate with a damp cloth. Do not use abrasive cleaners or metallic scouring pads.
- Clean the exterior of the iron with a soft, damp cloth.
- Empty any remaining water from the tank after each use.
Anti-Calc System
The integrated anti-calc system helps reduce limescale build-up. For optimal performance, regular descaling may still be necessary depending on water hardness. Refer to the full product manual for detailed descaling instructions if available.
Storage
After use, unplug the iron, empty the water tank, and allow it to cool down. Store the iron vertically on its heel in a safe, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Iron does not heat up. | Not plugged in; power outlet faulty; auto-off activated. | Check plug connection; try another outlet; move the iron to reactivate. |
| Water drips from the soleplate. | Temperature too low for steam; steam control set too high for temperature; anti-drip system not functioning. | Increase temperature to steam zone; reduce steam setting; if problem persists, contact support. |
| No steam or insufficient steam. | Water tank empty; temperature too low; steam holes clogged. | Fill water tank; increase temperature; perform descaling if necessary. |
| White flakes coming from soleplate. | Limescale build-up. | Perform descaling procedure. |
Specifications
- Model: DW4345
- Brand: Rowenta
- Power: 2600 Watts
- Continuous Steam Output: Up to 40 g/minute
- Steam Shot: Up to 200 g/minute
- Soleplate: Microsteam 300 Stainless Steel
- Features: Anti-Drip, Integrated Anti-Calc, Auto-Off, Vertical Steam
- Dimensions (L x W): Approximately 30.5 cm x 13.7 cm
- Weight: Approximately 1.59 Kilograms
- Country of Origin: China
Image: Diagram showing the approximate size of the iron. This visual aid provides a reference for the physical dimensions of the appliance.
Warranty and Support
This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical assistance, spare parts, or service, please contact your local Rowenta authorized service center or visit the official Rowenta website.
Information regarding spare parts availability is not provided in the product specifications.
