Ledlenser P6R Core

Download PDF
Contents

Ledlenser P6R Core Flashlight User Manual

Model: P6R Core | Brand: Ledlenser

Introduction

The Ledlenser P6R Core is a high-power, rechargeable LED flashlight designed for versatile use in home, emergency, and professional settings. It features an advanced focus system, smart light technology for customizable functions, and a temperature control system for optimal performance. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your P6R Core flashlight.

Ledlenser P6R Core Flashlight

Figure 1: Ledlenser P6R Core Flashlight

Key Features

  • Advanced Focus System: Seamlessly focus the light beam as a spot or flood without losing light quality.
  • Rechargeable: Equipped with a Lithium Ion battery, saving money and reducing environmental impact.
  • Smart Light Technology: Program a variety of light functions to suit your needs.
  • Temperature Control System: Prevents overheating, allowing the light to run brighter and longer.
  • Emergency Light: Automatically turns on if the power goes out while charging, providing immediate illumination.
  • IP68 Water Resistance: Superior protection against dust and water.
Ledlenser P6R Core Flashlight in use, illuminating a bike wheel

Figure 2: The P6R Core is a powerful and programmable flashlight for everyday use.

Setup

1. Initial Charging

Before first use, fully charge your Ledlenser P6R Core flashlight. The flashlight comes with a magnetic charging cable. Connect the magnetic end to the charging port on the flashlight and the USB end to a suitable power source (e.g., USB wall adapter, computer USB port).

Ledlenser P6R Core showing magnetic charging system and length

Figure 3: Magnetic Charging System and Flashlight Dimensions.

2. Battery & Charge Status Display

The flashlight features a battery and charge status display. The indicator light will show different colors to indicate the charge level:

  • Green: Fully charged or high battery level.
  • Orange: Medium battery level.
  • Red: Low battery level, requires charging.
Ledlenser P6R Core showing battery and charge status display colors and battery insertion

Figure 4: Battery & Charge Status Display and Battery Insertion.

Operating Instructions

1. Power On/Off and Light Modes

Press the power button to turn the flashlight on or off. The Smart Light Technology allows you to program and cycle through various light functions including:

  • Power: High brightness mode.
  • Mid Power: Balanced brightness for general use.
  • Low Power: Extended run time for minimal illumination.
  • Boost: Temporary maximum brightness.
  • Blink: Flashing light.
  • Position: Locating light.
  • SOS: Morse code SOS signal.
  • Strobe: Disorienting rapid flashes (hold the back button down to access).
Ledlenser P6R Core showing light functions and performance metrics

Figure 5: Available Light Functions and Performance Overview.

2. Advanced Focus System

The Advanced Focus System allows you to quickly switch between a broad floodlight for close-up illumination and a sharply focused spot beam for long-distance viewing. Simply slide the head of the flashlight forward or backward to adjust the focus.

Ledlenser P6R Core showing Advanced Focus System and Multi-Core Optics

Figure 6: Advanced Focus System and Multi-Core Optics for superior light quality.

Maintenance

1. Cleaning

To maintain optimal performance, keep your flashlight clean. Wipe the exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or seals. Ensure the charging contacts are clean and free of debris for efficient charging.

2. Water and Dust Protection

The P6R Core features IP68 water resistance and Flex Sealing Technology, providing superior protection against dust and water. While it is highly resistant, avoid prolonged submersion beyond its rated depth and ensure all caps and seals are properly secured before exposing it to water or dusty environments.

Ledlenser P6R Core flashlight partially submerged in water, demonstrating Flex Sealing Technology

Figure 7: Flex Sealing Technology provides superior protection against dust and water.

3. Temperature Control

The integrated Temperature Control System regulates the flashlight's heat to prevent overheating. This allows the LED to operate at optimal brightness and prolongs its lifespan. If the flashlight becomes warm during extended use, this is normal operation of the system.

Troubleshooting

  • Flashlight not turning on or only blinking red:

    This usually indicates a low or depleted battery. Ensure the flashlight is fully charged using the magnetic charging cable. Check the battery and charge status display (Figure 4) for the current charge level. If the issue persists after charging, ensure the battery is correctly inserted and the end cap is securely tightened.

  • Difficulty charging:

    Ensure the magnetic charging cable is properly connected to both the flashlight and the power source. Clean the magnetic charging contacts on both the flashlight and the cable to remove any dirt or debris that might obstruct the connection. Try a different USB power source if available.

  • Lens holder or components feel loose after a drop:

    While the P6R Core is designed for durability, severe impacts can sometimes dislodge internal components. If you notice any loose parts or changes in light performance after a drop, it is recommended to contact Ledlenser customer support for assistance. Do not attempt to disassemble the flashlight yourself, as this may void the warranty.

Specifications

FeatureDetail
BrandLedlenser
ModelP6R Core (880516)
Light Source TypeLED
Brightness900 Lumens (White)
Beam Distance (Max)240 meters
Run Time (Max)95 hours
Power SourceBattery Powered (1 Lithium Ion battery included)
MaterialAluminum
Water Resistance LevelIP68
Item Weight11.3 ounces
Product Dimensions3.35 x 2.83 x 8.27 inches

Warranty and Support

The Ledlenser P6R Core flashlight comes with a limited warranty. For detailed warranty information, product registration, or technical support, please visit the official Ledlenser website or contact their customer service. Always refer to the official product packaging and materials for the most accurate and up-to-date warranty terms and conditions.

You can find more information and contact details on the Ledlenser Store on Amazon.

© 2024 Ledlenser. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.