LEDWOOD InEar M1011 Bluetooth Headphones User Manual

Introduction

This manual provides detailed instructions for the proper use and maintenance of your LEDWOOD InEar M1011 Bluetooth Headphones. Please read this guide thoroughly before operating the device to ensure optimal performance and longevity.

Package Contents

Verify that all items are present in your package:

• LEDWOOD InEar M1011 Bluetooth Earbuds (Left and Right)
• Charging Case
• USB-C Charging Cable (may vary by region)
• User Manual

Product Overview

Familiarize yourself with the components of your LEDWOOD M1011 headphones and charging case.

Image: The LEDWOOD M1011 Bluetooth earbuds are shown alongside their open charging case. One earbud is placed outside the case, while the other is in its charging slot. The case is light blue with white interior charging compartments.

Image: A close-up view of the two LEDWOOD M1011 earbuds. Each earbud features a speaker grille, touch control area (indicated by three horizontal lines), and charging contacts on the stem.

Earbud Components:

• Touch Control Area: For managing music, calls, and voice assistant.
• Microphone: For hands-free calls and voice commands.
• Charging Contacts: Connects with the charging case.
• Speaker Grille: Audio output.

Charging Case Components:

• Charging Slots: Holds and charges the earbuds.
• LED Indicators: Shows charging status of the case and earbuds.
• USB-C Port: For charging the case.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case.

Image: The two LEDWOOD M1011 earbuds are placed inside their light blue charging case, which is open. The charging contacts on the earbuds align with the pins in the case.

1. Place both earbuds into the charging case. Ensure the charging contacts align.
2. Connect the USB-C charging cable to the charging port on the case and to a power source.
3. The LED indicators on the case will illuminate to show charging status. A full charge for the earbuds takes approximately 1 hour. The case provides additional charges for up to 15 hours of total playback.
4. Once fully charged, disconnect the charging cable.

2. Bluetooth Pairing

Pair your earbuds with your device for wireless audio.

1. Ensure the earbuds are charged.
2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by flashing LED lights (if applicable, refer to specific LED behavior in product documentation).
3. On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings.
4. Search for available devices and select "LEDWOOD M1011" from the list.
5. Once connected, the earbuds will indicate successful pairing (e.g., a voice prompt or solid LED light).
6. The earbuds will automatically reconnect to the last paired device when removed from the case, if Bluetooth is enabled on the device.

Operating Instructions

The LEDWOOD M1011 earbuds feature sensitive touch controls for various functions.

Power On/Off:

• Power On: Open the charging case, or long-press the touch control area on both earbuds for a few seconds if they are outside the case and off.
• Power Off: Place the earbuds back into the charging case and close the lid, or long-press the touch control area on both earbuds for several seconds until they power off.

Music Playback:

• Play/Pause: Tap the touch control area on either earbud once.
• Next Track: Double-tap the touch control area on the right earbud.
• Previous Track: Double-tap the touch control area on the left earbud.
• Volume Up: Triple-tap the touch control area on the right earbud.
• Volume Down: Triple-tap the touch control area on the left earbud.

Call Management:

• Answer/End Call: Tap the touch control area on either earbud once.
• Reject Call: Long-press the touch control area on either earbud for 2 seconds.

Voice Assistant:

• Activate Voice Assistant: Long-press the touch control area on either earbud for 3 seconds. This will activate your device's default voice assistant (e.g., Siri, Google Assistant).

Maintenance

Proper care ensures the longevity and performance of your earbuds.

• Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Charging Contacts: Periodically clean the charging contacts on both the earbuds and the case with a dry cotton swab to ensure a good connection.
• Storage: Store the earbuds in their charging case when not in use to protect them and keep them charged. Avoid extreme temperatures and humidity.
• Water Resistance: While the earbuds are waterproof, avoid prolonged submersion in water. Ensure they are dry before placing them back in the charging case.

Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

Specifications

Technical details for the LEDWOOD InEar M1011 Bluetooth Headphones:

Warranty and Support

LEDWOOD products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official LEDWOOD website. For technical support or further assistance, please contact LEDWOOD customer service through the contact information provided on their official website.