Introduction
This manual provides essential information for the proper use and maintenance of your LEDWOOD I9W In-Ear Bluetooth Headset with Wireless Charging Case. These high-quality in-ear headphones offer intuitive function control, a compact wireless charging case, and reliable Bluetooth 5.0 connectivity for an enhanced audio experience.

Image: The LEDWOOD I9W In-Ear Bluetooth Headset in its open pink wireless charging case, showing both earbuds nestled inside.
Setup
Charging the Case and Earbuds
Before first use, fully charge the wireless charging case and the earbuds. Place the earbuds into the charging case. The case can be charged wirelessly or via a compatible charging cable (not included). An LED charging indicator on the case will provide status updates. A full charge typically takes approximately 1 hour, providing up to 5 hours of earbud battery life.

Image: The LEDWOOD I9W wireless charging case in a closed position, showcasing its compact, smooth pink design with a small LED indicator light on the front.
Bluetooth Pairing
- Ensure the earbuds are in the charging case and the case is sufficiently charged.
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), navigate to the Bluetooth settings.
- Search for available devices and select "LEDWOOD I9W" from the list.
- Once connected, a confirmation sound may play, and the earbuds will be ready for use.
The headset utilizes Bluetooth 5.0 technology, offering a stable connection up to 15 meters (approximately 49 feet) in open environments.
Operating
Basic Functions
The LEDWOOD I9W earbuds feature intuitive touch controls for various functions:
- Play/Pause: Tap once on either earbud.
- Next Track: Double-tap the right earbud.
- Previous Track: Double-tap the left earbud.
- Answer/End Call: Tap once on either earbud during an incoming call.
- Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
- Activate Voice Assistant: Triple-tap either earbud (functionality depends on your device).
For optimal performance, ensure the earbuds are properly seated in your ears.

Image: An angled view of the LEDWOOD I9W In-Ear Bluetooth Headset in its open pink wireless charging case, showing the 'L' and 'R' indicators for the left and right earbuds.
Maintenance
Cleaning
Regular cleaning helps maintain sound quality and hygiene:
- Use a soft, dry, lint-free cloth to wipe the earbuds and charging case.
- Gently remove any earwax or debris from the earbud tips and speaker mesh using a small, soft brush or cotton swab.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
Storage
When not in use, always store the earbuds in their charging case to protect them and keep them charged. Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
Battery Care
To prolong battery life, avoid fully discharging the earbuds and charging case frequently. Charge them regularly, even if not used for extended periods.
Troubleshooting
No Sound or Pairing Issues
- Check Battery: Ensure both earbuds and the charging case are sufficiently charged.
- Re-pair: Delete "LEDWOOD I9W" from your device's Bluetooth list and attempt to pair again.
- Distance: Ensure your device is within the 15-meter Bluetooth range.
- Interference: Move away from other strong wireless signals that might cause interference.
Earbuds Not Charging
- Proper Placement: Ensure earbuds are correctly seated in the charging case.
- Clean Contacts: Gently clean the charging contacts on both the earbuds and inside the case with a dry cotton swab.
- Case Charge: Verify the charging case itself has sufficient power.
One Earbud Not Working
- Re-sync: Place both earbuds back into the charging case, close the lid for a few seconds, then open it again.
- Re-pair: Follow the re-pairing steps mentioned above.
Specifications
| Feature | Detail |
|---|---|
| Model Name | I9W |
| Item Model Number | LD-I9W-TWS-PAST-PINK |
| Brand | Ledwood |
| Colour | Pink |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth 5.0 |
| Included Components | Wireless Charging Case |
| Battery Life (Earbuds) | Up to 5 hours |
| Charging Time | Approx. 1 hour |
| Operating Distance | Up to 15 meters |
| Product Dimensions | 5.5 x 5.5 x 2.5 cm |
| Product Weight | 45 g |
| Material | Plastic |
| Batteries Required | 3 Lithium Ion batteries |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Ledwood website. Keep your proof of purchase for any warranty claims.





