Moukey MAMP1 Stereo Receiver Instruction Manual

1. Introduction

Welcome to the official instruction manual for your Moukey MAMP1 Stereo Receiver. This compact yet powerful 2.0 Channel Bluetooth Stereo Amplifier Receiver is designed to enhance your audio experience for various applications, including karaoke, home theater setups, acoustic sound systems, and personal monitoring with headphones. With its robust power output and versatile connectivity options, the MAMP1 delivers high-quality audio performance.

Figure 1.1: Moukey MAMP1 Stereo Receiver and included remote control.

2. Key Features

• 400 Watts Max Power: Provides 400 watts max power output (25W × 2 RMS power) for a high-quality home audio experience.
• 7 Input Options: Supports 2 pairs of RCA audio inputs (for CD/DVD players), 2 x 1/4 inch (6.35mm) microphone inputs, USB (max 32G), SD card (max 16G), 3.5mm AUX IN, and FM radio.
• EQ Controls: Features clear, responsive knobs for microphone echo/volume, balance, bass, treble, master volume, input source, and unique folder/track control.
• Bluetooth 5.0 Wireless Connection: Equipped with Bluetooth 5.0 for music streaming with a wireless range of 40 feet / 10 meters or more, compatible with smartphones, tablets, and computers.
• HD LED Screen: Integrated FM radio with a built-in LED display and front panel audio control center. Includes FM Antenna and Remote Control for convenience.

Figure 2.1: The Moukey MAMP1 supports a wide range of devices.

Figure 2.2: Bluetooth 5.0 for seamless wireless music streaming.

3. Setup Guide

3.1 Front Panel Overview

Figure 3.1: Front Panel Interface and Function Diagram.

1. Power Switch
2. USB / SD Card Slot
3. Mode Button
4. BT (Bluetooth) Button
5. Prev Button
6. Play / Pause Button
7. Next Button
8. LED Display
9. Folder / Track Knob (Push to select)
10. Master Volume Knob
11. Headphone Jack (1/4 inch / 6.35mm)
12. Microphone 1 Input (1/4 inch / 6.35mm)
13. Microphone 2 Input (1/4 inch / 6.35mm)
14. Microphone Volume Knob
15. Echo Knob
16. Bass Knob
17. Treble Knob
18. Balance Knob
19. AUX Input Jack (3.5mm)
20. Input Selector Knob

3.2 Rear Panel Connections

Figure 3.2: Rear Panel Connections Diagram.

1. Audio Input Jack for DVD (RCA)
2. Audio Input Jack for CD (RCA)
3. Line Out Jack (RCA)
4. FM Antenna Jack
5. Speaker Output Jack (Banana Plug / Bare Wire)
6. Power Cable Input

3.3 Speaker Connection

The MAMP1 supports 4Ω-16Ω speakers. Follow these steps if you are inserting bare wire directly into the speaker terminals:

Figure 3.3: Speaker Wire Connection Steps.

1. Rotate and loosen the speaker knob.
2. Insert the bare wire (remove approximately 10mm insulation). Ensure correct polarity (+ to + and - to -).
3. Tighten the knobs and secure the wires.

For optimal performance, ensure all connections are secure before powering on the device.

4. Operating Instructions

4.1 Power On/Off

Press the Power Switch on the front panel to turn the unit ON or OFF. The LED display will illuminate when powered on.

4.2 Input Selection

Rotate the Input Selector Knob on the front panel to choose your desired audio source: DVD, CD, AUX, or MP3/BT.

4.3 Bluetooth Connection

Select the 'MP3/BT' input using the Input Selector. The LED display will show 'BLUE'. On your mobile device, search for 'Moukey MAMP1' in your Bluetooth settings and pair. Once connected, you can stream audio wirelessly.

4.4 USB/SD Playback

Insert a USB drive (max 32G) or SD card (max 16G) into the respective slots on the front panel. The unit will automatically switch to USB/SD mode and begin playback. Use the 'Folder/Track' knob to navigate through folders and tracks, and the 'Prev' and 'Next' buttons for track control.

4.5 FM Radio

Connect the FM antenna to the rear panel. Select the FM input mode. Use the 'CH-' and 'CH+' buttons to tune to radio stations. The 'AUTO' button can be used for automatic station scanning.

4.6 Microphone Usage

Connect up to two 1/4 inch (6.35mm) microphones to the MIC 1 and MIC 2 inputs. Adjust the microphone volume using the 'MIC VOL' knob and add echo effect with the 'ECHO' knob.

Figure 4.1: Connecting microphones for karaoke or public address.

4.7 EQ Controls

Adjust the sound output to your preference using the 'BASS' and 'TREBLE' knobs. The 'BALANCE' knob allows you to adjust the left and right channel output balance.

Figure 4.2: Adjustable Bass and Treble EQ Controls.

4.8 Headphone Output

Connect 1/4 inch (6.35mm) headphones to the dedicated headphone jack for private listening. This will mute the speaker outputs.

4.9 Remote Control

The included remote control allows for convenient operation from a distance. Note that the remote control can ONLY remotely control the volume of MP3/BT/FM sources.

5. Maintenance

• Keep the unit in a dry, well-ventilated area away from direct sunlight and heat sources.
• Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive chemicals.
• Ensure proper ventilation by not blocking the vents on the top and sides of the unit.
• Avoid placing heavy objects on top of the amplifier.

6. Troubleshooting

• No Power: Ensure the power cable is securely plugged into the unit and a working power outlet. Check the power switch is in the 'ON' position.
• No Sound: Verify that the correct input source is selected. Check all audio cables (RCA, AUX, speaker wires) are securely connected and not damaged. Ensure the Master Volume is turned up and not muted. Check speaker impedance compatibility.
• Bluetooth Pairing Issues: Make sure the unit is in 'BLUE' mode. Ensure your mobile device's Bluetooth is on and within range (40ft/10m). Try forgetting the device on your phone and re-pairing.
• Distorted Sound: Reduce the Master Volume. Check if the input source audio is distorted. Adjust Bass and Treble EQ settings.
• Microphone Not Working: Ensure microphones are properly plugged into MIC 1/2. Adjust 'MIC VOL' knob. Check microphone cable and microphone itself.

7. Specifications

8. Warranty and Support

Moukey products come with a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your product packaging or visit the official Moukey website. You can also contact Moukey customer service directly through their Amazon store page or contact information provided in the product documentation.

Visit the Moukey Store on Amazon for more information and support.