Maxlite APS-8/1350J
MaxLite Advanced Power Strip User Manual
Model: APS-8/1350J | Brand: Maxlite
Introduction
This manual provides essential information for the safe and efficient operation of your MaxLite 8-Outlet Advanced Surge Protector Power Strip. The Advanced Power Strip (APS) is designed to conserve energy by automatically powering off peripheral devices when the main device connected to the "Master" outlet is turned off. This feature helps reduce standby power consumption.
Product Features
- Surge protection up to 1350 Joules, safeguarding connected electronics from power surges.
- 8 Grounded AC Receptacles for connecting multiple devices.
- Includes 3 Transformer outlets designed for larger power adapters, preventing blockage of adjacent outlets.
- Energy-saving functionality with a "Master" outlet and "Energy Saver" secondary outlets.
- "Always On" outlets for devices requiring continuous power.
- Integrated power switch with circuit breaker for overload protection.
- Protected and Grounded indicator lights for operational status.
Product Overview
Figure 1: Angled view of the MaxLite Advanced Power Strip, showing the power switch, indicator lights, and outlet layout.
Figure 2: Top-down view of the power strip, highlighting the "Master", "Always On", and "Energy Saver" outlets, along with the power cord.
Figure 3: Underside of the power strip, revealing keyhole slots for wall mounting.
Setup
- Unpack: Carefully remove the power strip from its packaging. Inspect for any signs of damage.
- Placement: Position the power strip in a dry indoor location, away from heat sources, water, and direct sunlight. Ensure adequate ventilation. The unit can be placed on a flat surface or mounted to a wall using the integrated keyhole slots on the back (mounting hardware not included).
- Connect to Wall Outlet: Plug the power strip's cord directly into a standard, grounded 120V AC wall outlet. Do not plug into another power strip or extension cord.
- Power On: Press the red power switch to the "ON" position. The "PROTECTED" (red) and "GROUNDED" (green) indicator lights should illuminate, confirming proper operation and surge protection.
Operating Instructions
Understanding the Outlets:
- Master Outlet: This outlet controls the power to the "Energy Saver" outlets. Plug your primary device (e.g., TV, computer, printer) into this outlet.
- Energy Saver Outlets: These outlets are controlled by the "Master" outlet. Plug peripheral devices (e.g., speakers, monitors, lamps) into these outlets. When the device in the "Master" outlet is turned off, power to the "Energy Saver" outlets will automatically shut off, saving energy.
- Always On Outlets: These outlets provide continuous power, regardless of the status of the "Master" device. Use these for devices that need to remain powered on at all times (e.g., cable box, router, phone charger).
Connecting Devices:
- Identify which type of outlet is appropriate for each device you wish to connect.
- Plug your devices into the corresponding outlets. Ensure plugs are fully inserted.
- To utilize the energy-saving feature, ensure your primary device is plugged into the "Master" outlet. When this device is turned off, the "Energy Saver" outlets will power down. When the "Master" device is turned back on, the "Energy Saver" outlets will reactivate.
Maintenance
- Keep the power strip clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- Do not expose the power strip to moisture or extreme temperatures.
- Regularly check the power cord for any signs of damage, fraying, or kinks. If damaged, discontinue use immediately.
- Avoid overloading the power strip. Refer to the specifications for maximum wattage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. | Power switch is off, circuit breaker tripped, or wall outlet is not functioning. | Ensure the power switch is ON. If the circuit breaker button is popped out, press it in to reset. Check the wall outlet with another device. |
| "PROTECTED" light is off. | Surge protection has been compromised due to a power surge or spike. | The power strip may no longer provide surge protection. Replace the unit to ensure continued protection for your devices. |
| "GROUNDED" light is off. | Improper grounding in the wall outlet. | Consult a qualified electrician to inspect and correct the wiring of your wall outlet. |
| Energy Saver outlets not turning off/on with Master device. | Master device not drawing enough power, or sensitivity setting issue (if applicable). | Ensure the Master device is properly connected and drawing sufficient power. Some APS models have adjustable sensitivity; refer to specific product details if available. |
Specifications
| Attribute | Value |
|---|---|
| Brand | Maxlite |
| Model Number | APS-8/1350J |
| Product Dimensions | 12.95 x 9.06 x 2.76 inches |
| Item Weight | 1.43 pounds |
| Total Power Outlets | 8 |
| Surge Protection | 1350 Joules |
| Voltage | 240 Volts |
| Color | White |
| Special Feature | Extension cord |
| Date First Available | August 31, 2020 |
| Manufacturer | MaxLite |
Safety Information
- For indoor use only. Do not use in wet or damp conditions.
- Do not exceed the electrical ratings of the power strip.
- Do not open the casing of the power strip. There are no user-serviceable parts inside.
- Keep out of reach of children and pets.
- Ensure the power strip is properly grounded. The "GROUNDED" indicator light should be illuminated.
- If the "PROTECTED" indicator light is off, the surge protection is no longer active. Replace the unit.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact MaxLite customer service. Refer to the product packaging or the official MaxLite website for the most current contact details and warranty terms.
MaxLite Store: Visit the MaxLite Store on Amazon
Related documentsAPS-8/1350J
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.