Product Overview
The Refoss Wireless Garage Door Keypad provides keyless entry for your garage, offering convenience and security. This keypad is designed to work specifically with garage door openers featuring a purple learn button, operating on a 315 MHz frequency. It supports control of up to three individual garage doors with unique PINs.
Image: Refoss Wireless Garage Door Keypad. This image displays the keypad with its protective cover lifted, revealing the numeric buttons and the specific compatibility label for purple learn buttons.
Compatibility
This Refoss Wireless Garage Door Keypad is only compatible with garage door openers that have a PURPLE learn button. It works with Security+ 315 MHz Chamberlain, LiftMaster, and Craftsman garage openers manufactured between 2006 and 2014. Please verify your garage door opener's learn button color before proceeding with installation or programming.
Image: Compatibility Diagram. This visual guide illustrates the correct purple learn button for compatibility and shows examples of incompatible learn button colors (red, orange, green, yellow).
Package Contents
Before beginning installation, ensure all components are present in the package:
- 1 x Refoss Wireless Keypad
- 1 x User Manual (this document)
- 4 x Screws
- 4 x Screw Anchors
- 4 x 3M Double-Sided Tape
- 1 x 9V Battery
Image: Package Contents. This illustration details all items included in the product box, ensuring users can verify they have everything needed for installation.
Setup and Programming
The Refoss Wireless Keypad is designed for easy, wireless programming. Follow these steps carefully to set up your keypad and program it to your garage door opener.
Step 1: Install Battery
- Open the battery compartment on the back of the keypad.
- Insert the included 9V battery, ensuring correct polarity.
- Close the battery compartment securely.
Step 2: Program the Keypad
This keypad can control up to three garage doors. Each door requires its own unique PIN.
- Locate the PURPLE Learn Button on your garage door opener motor unit. This button is typically found on the back or side panel of the motor.
- Press and immediately release the PURPLE Learn Button. The learn indicator light on the opener will glow steadily for 30 seconds.
- Within 30 seconds, enter your desired 4-digit PIN on the Refoss keypad.
- Press and hold the ENTER / # button on the keypad until the garage door opener lights flash or two clicks are heard. This indicates successful programming.
- Test the keypad by entering your PIN and pressing ENTER / #. The garage door should activate.
To program additional garage doors (up to three), repeat Step 2 for each door, using a different 4-digit PIN for each.
Operating Instructions
Opening/Closing a Garage Door
- Enter your 4-digit PIN for the desired garage door.
- Press the ENTER / # button.
- The garage door will open or close.
Controlling Multiple Doors
The keypad supports individual PINs for up to three garage doors. Simply enter the specific PIN for the door you wish to operate.
Image: One Keypad for Three Doors. This image visually represents the keypad's capability to manage up to three distinct garage doors using individual access codes.
Maintenance
Battery Replacement
The keypad uses one 9V alkaline battery. When the keypad backlight dims or the keypad becomes unresponsive, it is time to replace the battery.
- Open the battery compartment on the back of the keypad.
- Remove the old 9V battery.
- Insert a new 9V alkaline battery, ensuring correct polarity.
- Close the battery compartment securely.
Cleaning
Wipe the keypad surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Weather Protection
The keypad features a weatherproof protective cover designed to shield it from various weather conditions. Ensure the cover is properly closed when not in use to maximize its protective capabilities.
Image: Weatherproof and Fluorescent Features. This image demonstrates the keypad's durability against outdoor elements and its illuminated keys for visibility in low-light conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad does not respond. | Dead or low battery. | Replace the 9V battery. |
| Garage door does not open/close after entering PIN. | Keypad not programmed correctly or incompatible opener. |
|
| Keypad backlight is dim. | Low battery. | Replace the 9V battery. |
| Cannot program multiple doors. | Incorrect programming sequence for additional doors. | Ensure you are using a unique PIN for each door and repeating the programming steps for each. |
Specifications
- Model: RGR545
- Compatibility: Chamberlain, LiftMaster, Craftsman garage door openers with PURPLE learn button (Security+ 315 MHz, manufactured 2006-2014)
- Frequency: 315 MHz
- Number of Doors Supported: Up to 3
- Power Source: 1 x 9V Alkaline Battery
- Dimensions: Approximately 2 x 6 x 1 inches
- Weight: Approximately 7.8 ounces
- Special Features: Weatherproof, Fluorescent Keypad
Warranty Information
This Refoss Wireless Garage Door Keypad comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or support regarding your Refoss Wireless Garage Door Keypad, please contact our customer support team. We offer caring customer support 7 days a week.
Refer to the product packaging or the Refoss official website for the most current contact information.
