1. Introduction
The ThruNite Archer 2A V3 is a compact and durable LED flashlight designed for versatile everyday use. Featuring a dual-switch interface, multiple brightness levels, and robust construction, it is suitable for various outdoor activities, emergency situations, and general illumination needs. This manual provides essential information for the proper setup, operation, and maintenance of your Archer 2A V3 flashlight.
Image 1: ThruNite Archer 2A V3 LED Flashlight, showcasing its sleek black aluminum body.
2. Package Contents
Please check the package for the following items:
- Archer 2A V3 flashlight x1
- Lanyard x1
- Pocket clip x1
- Spare O-rings x2
Image 2: All items included in the ThruNite Archer 2A V3 package, laid out on a white background.
3. Specifications
| Feature | Detail |
|---|---|
| LED Type | XP-L2 LED |
| Max Output | 500 Lumens |
| Beam Distance | 93 meters |
| Power Source | 2 x AA batteries (Alkaline, not rechargeable) |
| Material | Aerospace-grade aluminum body with military-grade Type III hard-anodized anti-abrasive finish |
| Water Resistance | IPX8 (2 meters submersible) |
| Impact Resistance | 1 meter |
| Dimensions | 6.1"D x 0.87"W x 0.87"H |
| Weight | 1.69 ounces (without batteries) |
The ThruNite Archer 2A V3 is designed for durability and performance, featuring a robust aluminum construction and an XP-L2 LED for efficient illumination.
Image 3: Close-up view of the XP-L2 LED emitter, highlighting the orange peel reflector for a smooth beam.
4. Setup
4.1 Battery Installation
The Archer 2A V3 requires two AA batteries (not included). To install the batteries:
- Unscrew the tail cap of the flashlight.
- Insert two AA batteries with the positive (+) end facing towards the head of the flashlight.
- Screw the tail cap back on tightly to ensure proper contact and water resistance.
Ensure the batteries are inserted correctly according to polarity markings to prevent damage to the flashlight.
Image 4: The tail cap of the ThruNite Archer 2A V3, which unscrews for battery access.
Video 1: A demonstration of battery installation and the robust construction of the tail cap switch, highlighting the heavy-duty spring and solid contact point. The video also shows the O-ring for IPX8 waterproofing.
5. Operating Instructions
5.1 Power ON/OFF
- Momentary Activation: Press the tail cap halfway to momentarily activate the light.
- Constant ON/OFF: Fully click the tail switch to turn the light on or off.
5.2 Mode Selection
When the light is on, use the side switch to cycle through the brightness modes:
- Cycle Modes: Single press the side switch to rotate among Firefly, Low, Medium, and High modes.
- Strobe Mode: Long press the side switch to activate Strobe mode. Single press the side switch again to exit Strobe mode and return to the previously used brightness level.
5.3 Mode Memory Function
The Archer 2A V3 features a mode memory function. It will remember the last used brightness mode (Firefly, Low, Medium, or High) when turned off and will activate in that mode when turned back on. Strobe mode is not memorized.
5.4 Output and Runtime (using 2x AA Alkaline batteries)
| Mode | Output | Runtime |
|---|---|---|
| Firefly | 0.2 Lumens | 15 Days |
| Low | 17 Lumens | 51 Hours |
| Medium | 70 Lumens | 11 Hours |
| High | 500 Lumens (steps down to 280 Lumens after 3.3 minutes) | 3.3 Minutes + 2 Hours |
| Strobe | 400 Lumens | 2.25 Hours |
Image 5: Illustration of the dual switch operation, showing the tail cap for ON/OFF and the side switch for mode changes.
Video 2: A short demonstration of the ThruNite Archer 2A V3's brightness levels and strobe function in a dark environment, showcasing its powerful output.
Video 3: Night shot footage demonstrating the beam throw and illumination capabilities of the Archer 2A V3 in various modes, highlighting its effectiveness in dark conditions.
6. Maintenance
- Cleaning: Clean the threads and O-rings regularly with a clean cloth.
- Lubrication: Apply a thin layer of silicone grease to the O-rings periodically to maintain water resistance.
- O-ring Replacement: Replace worn O-rings with the provided spare O-rings to ensure the IPX8 waterproof rating.
- Battery Care: Remove batteries from the flashlight if it will not be used for an extended period to prevent battery leakage and potential damage.
Video 4: A short preview video demonstrating the IPX8 water resistance of the ThruNite Archer 2A V3 by submerging it in water while operating, confirming its waterproof capabilities.
7. Troubleshooting
- Light does not turn on:
- Check if the batteries are inserted correctly with the positive (+) end towards the head.
- Ensure the tail cap is screwed on tightly.
- Replace batteries with fresh ones if they are depleted.
- Light flickers or turns off unexpectedly:
- Clean the battery contacts and threads with a clean cloth.
- Ensure the tail cap is fully tightened.
- Check battery charge level and replace if necessary.
8. Warranty & Support
ThruNite offers a limited warranty for its products. For detailed warranty information, product support, or any issues not covered in this manual, please contact ThruNite customer service directly. Contact information can typically be found on the official ThruNite website or through your retailer.
Customer Service: Please do not hesitate to contact us if you encounter any further problems with our products.
