Victgoal

Download PDF
Contents

Victgoal Bike Helmet User Manual

Model: HT-23

1. Introduction

Thank you for choosing the Victgoal Bike Helmet. This helmet is designed to provide safety, comfort, and convenience for cyclists. It features a durable construction, excellent ventilation, a USB rechargeable LED rear light, and versatile magnetic goggles and visor. Please read this manual thoroughly before first use to ensure proper setup, operation, and maintenance.

Victgoal Bike Helmet with magnetic goggles and visor
Victgoal Bike Helmet with USB Rechargeable LED Light, Removable Magnetic Goggles, and Visor.

2. Safety Information

WARNING: Always wear a helmet when cycling. No helmet can protect against all foreseeable impacts. For maximum protection, the helmet must fit properly and all retention straps must be securely fastened.

  • Ensure the helmet fits snugly and comfortably on your head.
  • Always fasten the chin strap securely.
  • Inspect the helmet for any damage before each ride. Do not use if damaged.
  • Clean the helmet only with mild soap and water. Harsh chemicals can damage the helmet's materials.
  • Do not modify the helmet in any way.
  • Replace the helmet after any significant impact, even if visible damage is not apparent.

3. Package Contents

  • Victgoal Bike Helmet
  • Removable Magnetic Goggles (UV400 protection)
  • Removable Visor
  • USB Charging Cable (Micro USB to USB-A)
  • Instruction Manual (this document)
  • Portable Storage Bag

Victgoal helmet storage bag
The helmet comes with a convenient portable storage bag.

4. Setup and Adjustment

4.1 Sizing and Fit

The Victgoal helmet is available in multiple sizes to ensure a comfortable and secure fit. To determine your correct size, measure your head circumference approximately 1 cm (0.5 inch) above your eyebrows and ears.

Head measuring method and size chart for Victgoal helmet
Measuring your head circumference for optimal helmet fit.

SizeHead Circumference (cm)Head Circumference (inches)
M54-58 cm21.3-22.8 inches
L57-61 cm22.4-24 inches
XL59-63 cm23.2-24.8 inches

Victgoal helmet sizing guide for M, L, XL sizes
Visual guide for helmet sizes M, L, and XL.

To adjust the helmet for a perfect fit, use the dial knob located at the back of the helmet. Rotate the knob clockwise to tighten and counter-clockwise to loosen until the helmet feels snug without being too tight.

Close-up of the size adjusting dial knob on the Victgoal helmet
Adjust the helmet size using the dial knob at the back.

Adjust the chin straps to ensure they are comfortable and secure. The buckle should be centered under your chin.

Close-up of the chin strap buckle on the Victgoal helmet
Secure the chin strap for a safe fit.

4.2 Attaching the Visor and Goggles

The helmet comes with a removable visor and magnetic goggles. These can be used together or separately.

  • Visor: Align the clips on the visor with the corresponding slots on the front of the helmet and press firmly until they click into place.
  • Magnetic Goggles: The goggles attach magnetically to the helmet. Simply bring the goggles close to the designated magnetic points on the helmet, and they will snap into place. They can be flipped up and secured on top of the helmet when not in use.

Victgoal helmet showing magnetic goggles and visor attachment
The helmet can be worn with a visor, goggles, or both for versatile protection.

Person wearing Victgoal helmet with large magnetic goggles over prescription glasses
The large magnetic goggles are designed to be friendly for glasses wearers.

5. Operating the LED Rear Light

The Victgoal helmet features a built-in USB rechargeable LED rear light for enhanced visibility and safety, especially during low-light conditions or at night. The light offers three different lighting modes.

Victgoal helmet with USB rechargeable LED light and usage times
The USB rechargeable LED light provides multiple lighting modes and long usage times.

5.1 Charging the Light

To charge the LED light, locate the Micro USB charging port on the rear light module. Connect the provided USB charging cable to the port and plug the other end into a standard USB power source (e.g., computer, wall adapter). A full charge takes approximately 1.5 hours and provides up to 12 hours of use depending on the mode.

5.2 Light Modes

Press the power button on the rear light module to cycle through the different modes:

  1. Steady On
  2. Fast Flashing
  3. Slow Flashing

Press and hold the button to turn the light off.


Video demonstrating the features and operation of the Victgoal Bike Helmet, including the rechargeable rear light.


Video showcasing the VA110 & VA112 Bike Helmet, highlighting its design and functionality.


Official product video for the VICTGOAL Bike Helmet VG112, demonstrating its key attributes.

6. Maintenance and Care

6.1 Cleaning

To clean your helmet, use a soft cloth, mild soap, and water. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the helmet's shell and internal components. The inner liner is soft and washable for hygiene.

Victgoal helmet showing soft and washable liner
The helmet features a soft and washable liner for easy cleaning and air flow.

Close-up of the inner padding of the Victgoal helmet
The inner padding can be detached for cleaning.

6.2 Storage

Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing it near heat sources or in areas where it could be exposed to chemicals or fumes.

7. Troubleshooting

  • Helmet feels loose/tight: Adjust the dial knob at the back of the helmet. Ensure chin straps are properly tightened.
  • LED light not working: Ensure the light is charged. Connect the USB cable and check for charging indicator. If still not working, contact customer support.
  • Goggles/Visor not attaching securely: Ensure the magnetic points on the helmet and goggles are clean and free of debris. For the visor, ensure clips are fully engaged.

8. Specifications

FeatureDetail
Model NameHT-23
Age RangeAdult (Unisex)
Outer MaterialPolycarbonate (PC)
Inner MaterialEPS Foam (3cm thick)
WeightApprox. 308 g
Ventilation21 breathable vents
Rear LightUSB Rechargeable LED (3 modes)
GogglesMagnetic, UV400 Protection
AdjustabilityAdjustable dial knob, chin straps
Dimensions (L x W x H)26 x 22 x 12 cm

Victgoal helmet showing superior ventilation and reflective strap
The helmet features 21 air vents for superior ventilation and a reflective strap for added visibility.

Victgoal helmet showing all-round protection with EPS foam
Constructed with high-density PC shell and 3cm thick EPS foam for all-round impact protection.

9. Warranty and Support

Victgoal products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the contact information provided with your purchase or visit the official Victgoal website.

© 2024 Victgoal. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.