Introduction
This manual provides essential information for the safe and effective use of your Belkin 8-Outlet Surge Protector with 2 USB Ports (Model BSV804AR2M). This device is designed to protect your electronic equipment from power surges and voltage fluctuations, while also providing convenient charging for USB-powered devices.
Please read all instructions carefully before using the product and retain this manual for future reference.
Safety Precautions
- Do not use in wet environments or near water.
- Do not exceed the electrical ratings of the surge protector.
- Do not open or modify the device. There are no user-serviceable parts inside.
- Ensure the surge protector is plugged directly into a grounded wall outlet. Do not use with extension cords or other power strips.
- Keep out of reach of children.
Package Contents
- 1 x Belkin 8-Outlet Surge Protector with 2 USB Ports (Model BSV804AR2M)
- Integrated 6.6 ft (2m) power cord
Image: The Belkin 8-Outlet Surge Protector, Model BSV804AR2M, shown in its retail packaging. The packaging highlights key features such as 2 USB ports, 8 outlets, 6.6 ft cable, and 900 joules of surge protection.
Product Features
- 8 AC Outlets: Provides power and surge protection for multiple electronic devices.
- 2 USB Charging Ports: Shared 2.4 Amps for convenient charging of smartphones, tablets, and other USB-powered devices.
- 6.6 ft (2m) Power Cord: Offers flexible placement options.
- 900 Joules Surge Protection: Safeguards connected equipment from damaging power surges and spikes.
- Damage-Resistant Housing: Durable construction protects internal components.
- Power Indicator Light: Confirms the surge protector is receiving power.
- Protected Indicator Light: Confirms surge protection is active.
Image: A front view of the Belkin 8-Outlet Surge Protector. It features eight AC outlets arranged in two columns, two USB charging ports at the bottom, and a power switch with indicator lights at the top.
Setup Instructions
- Placement: Position the surge protector in a dry, indoor location, away from heat sources and direct sunlight. Ensure the power cord can reach a grounded wall outlet without being stretched or obstructed.
- Connect to Power: Plug the surge protector's integrated power cord directly into a standard, grounded 3-prong wall outlet. Do not plug it into another extension cord or power strip.
- Verify Power: Once plugged in, the "Power" indicator light on the surge protector should illuminate, indicating it is receiving power. The "Protected" indicator light should also be illuminated, confirming that the surge protection feature is active.
- Connect Devices: Plug your electronic devices into the AC outlets on the surge protector. For USB charging, connect your USB cables to the two USB ports.
Image: A side view of the Belkin 8-Outlet Surge Protector, highlighting the arrangement of the eight AC outlets and the two USB charging ports at the base. This view helps in understanding how to connect devices.
Operating Instructions
- Power On/Off: The surge protector features a master power switch. Press the switch to turn power on or off to all connected AC outlets and USB ports.
- Surge Protection: The "Protected" indicator light confirms that your devices are protected from surges. If this light goes out, the surge protection has been compromised, and the unit should be replaced.
- Overload Protection: The surge protector includes an overload protection feature. If the total power draw of connected devices exceeds the maximum rating, the surge protector will automatically shut off to prevent damage. To reset, unplug some devices, then press the reset button (often integrated with the power switch) or unplug and replug the unit.
- USB Charging: The two USB ports provide a shared 2.4A output. This is suitable for charging most smartphones and tablets. Charging speed may vary depending on the number of devices connected and their power requirements.
Maintenance
- Cleaning: Disconnect the surge protector from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power cord and the surge protector for any signs of damage, such as frayed wires or cracks in the housing. If damage is found, discontinue use and replace the unit.
- Surge Protection Status: Regularly check the "Protected" indicator light. If it is off, the surge protection is no longer active, and the unit should be replaced to ensure continued protection for your devices.
Troubleshooting
- No Power to Devices:
- Ensure the surge protector is firmly plugged into a working wall outlet.
- Check if the power switch on the surge protector is in the "On" position.
- Verify that the "Power" indicator light is illuminated.
- If the "Protected" light is off, the surge protection may have been sacrificed to protect your devices. The unit needs replacement.
- If the unit tripped due to overload, unplug some devices and reset the surge protector (usually by pressing the power switch or unplugging/replugging).
- USB Devices Not Charging:
- Ensure the surge protector is powered on.
- Check the USB cable for damage and ensure it is properly connected to both the surge protector and the device.
- Try charging a different USB device or using a different USB cable to isolate the issue.
- Note that the USB ports share 2.4A. If multiple high-power devices are connected, charging speed may be reduced.
Specifications
| Model Number | BSV804AR2M |
| Total AC Outlets | 8 |
| USB Charging Ports | 2 (Shared 2.4 Amps) |
| Surge Protection Rating | 900 Joules |
| Power Cord Length | 6.6 ft (2 meters) |
| Product Dimensions (L x W) | 19.61" x 2.05" |
| Compatible Devices | Laptop, Printer, Hard Drive, Computer, Peripheral, Electronic Device |
| Plug Type | Type G (UK/Ireland/Hong Kong style) - Note: Product image shows Type G plug. |
Warranty Information
Belkin offers a Connected Equipment Warranty with this surge protector. This warranty provides financial protection for equipment that is damaged by a power surge while properly connected to the Belkin surge protector. The specific coverage amount mentioned is up to £60,000*.
For full terms, conditions, and claim procedures regarding the Connected Equipment Warranty, please refer to the official Belkin website or the warranty card included with your product. Keep your purchase receipt as proof of purchase.
*Note: The warranty amount and terms may vary by region. Please check local Belkin warranty information.
Support
For further assistance, product registration, or to view frequently asked questions, please visit the official Belkin support website. You can typically find contact information for customer service on their website.
Belkin Official Website: www.belkin.com
