1. Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your TALOYA Upgraded Flush Mount LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
The TALOYA 8293 is a dimmable LED ceiling light fixture featuring three selectable color temperatures (3000K, 4000K, 6500K) and a low-profile design, suitable for various indoor applications.
2. Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker before installation or servicing.
- Ensure the main power supply is turned off before beginning installation.
- Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring.
- This fixture is designed for indoor use only.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- The fixture is constructed with a high-quality refractory plastic shell, providing insulation and preventing leakage hazards from short circuits. Ground wire connection is not required during installation.
- Ensure the mounting surface can support the weight of the fixture.
3. Package Contents
Verify that all components are present before installation:
- LED Ceiling Light Fixture (integrated LED bulb)
- Mounting Base Plate
- Mounting Screws
- Wire Nuts
- Instruction Manual
4. Specifications
| Feature | Specification |
|---|---|
| Brand | TALOYA |
| Model Number | 8293 |
| Color | Black (Fixture), White (Shade) |
| Material | Plastic |
| Product Dimensions | 15.75"L x 15.75"W x 0.94"H |
| Installation Type | Flush Mount |
| Light Source Type | LED |
| Wattage | 24 Watts |
| Voltage | 120 Volts |
| Brightness | 2400 Lumens |
| Efficiency | 100 LM/W |
| Color Temperatures | 3000K (Warm White), 4000K (Neutral White), 6500K (Cool White) |
| Special Feature | Dimmable (compatible with most Triac dimmers) |
| Indoor/Outdoor Usage | Indoor use only |
| Item Weight | 3.24 pounds (1.47 Kilograms) |
5. Installation Guide
Follow these steps to install your TALOYA LED Ceiling Light. Ensure power is disconnected at the circuit breaker before starting.
Step 1: Prepare the Mounting Base Plate
Identify the correct orientation for the mounting base plate. The side marked "Note: This side must face downwards" should be oriented towards the floor, away from the ceiling.
Figure 1: Overview of installation steps.
The base plate is designed for compatibility with most standard junction boxes.
Figure 2: Base plate compatibility with junction boxes.
Step 2: Secure the Base Plate
Attach the mounting base plate to your electrical box using the provided mounting screws. For solid ceilings, use tapered tapping screws. For wire boxes, use flat head screws. Ensure the base plate is securely fastened.
Step 3: Connect Electrical Wires
Connect the AC cables (Live/Neutral) from your ceiling to the corresponding wires on the light fixture using the provided wire nuts. Since the lamp is made of insulating plastic, a ground wire connection is not required.
Step 4: Install the Light Fixture
Carefully push the wire nuts and excess wiring into the electrical box. Align the light fixture with the secured base plate and rotate it clockwise until it snaps firmly into place. Ensure it is secure and flush against the ceiling.
Figure 3: Installed ceiling light fixture.
6. Operation
6.1 Color Temperature Selection
The TALOYA LED Ceiling Light offers three color temperature options: 3000K (Warm White), 4000K (Neutral White), and 6500K (Cool White). To select your desired color temperature, locate the small switch on the back side of the light fixture. Slide the button to choose between the available options before final installation or by carefully unscrewing the fixture to access the switch.
Figure 4: Color temperature selection switch.
6.2 Dimming Function
This fixture is dimmable and compatible with most Triac dimmers available in the North American market. Connect the light fixture to a compatible dimmer switch (not included) to adjust the brightness from 10% to 100%.
Figure 5: Dimmable brightness demonstration.
7. Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- LED Longevity: The integrated LED module is designed for long-term use (over 3 years under normal usage of 8 hours per day). It does not require bulb replacement.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty switch | Check circuit breaker; Verify wire connections; Test switch functionality. |
| Light flickers or dims unexpectedly | Incompatible dimmer switch; Loose wiring; Power fluctuations | Ensure dimmer is Triac compatible; Check wire connections; Consult electrician for power issues. |
| Incorrect color temperature | Color temperature switch set incorrectly | Access the switch on the back of the fixture and adjust to the desired setting. |
If troubleshooting steps do not resolve the issue, please contact TALOYA customer support.
9. Warranty and Support
TALOYA provides a 2-year warranty for this product. For any quality-related issues, a free replacement will be arranged based on the original purchasing proof.
For questions, concerns, or technical support, please do not hesitate to contact the TALOYA After-sales service team. They are available to provide quick solutions and assistance.
Contact information for support is typically found on the product packaging or the official TALOYA website.
