weelye 2.4G Bluetooth Remote Control and JR-RX-12V (JR1630RX-12V) Control Box Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your weelye 2.4G Bluetooth Remote Control and JR-RX-12V (JR1630RX-12V) Control Box Kit. This kit is designed for use with specific children's riding toys and features a slow start function, eliminating the need for an additional slow starter. Please read this manual thoroughly before use to ensure proper function and safety.

2. Safety Information

WARNING!

• Not for children under 3 years. Contains small parts which pose a choking hazard.
• Load two AAA (1.5V) batteries into the remote control according to the polarity diagram.
• Non-rechargeable batteries are not to be recharged.
• Different types of batteries or new and used batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The packaging must be retained as it contains important information.

3. Product Overview

The weelye 2.4G Bluetooth Remote Control and JR-RX-12V (JR1630RX-12V) Control Box Kit consists of two main components: the remote control transmitter and the JR-RX-12V control box receiver.

3.1 JR-RX-12V Control Box (JR1630RX-12V)

This is the receiver unit that connects to your children's riding toy. It manages motor control and receives signals from the remote control.

Image: The JR-RX-12V (JR1630RX-12V) control box, showing its model number and specifications label.

3.2 2.4G Bluetooth Remote Control

This is the handheld transmitter used to control the riding toy remotely. It operates on a 2.4G Bluetooth frequency.

Image: The white 2.4G Bluetooth remote control with its various control buttons.

4. Setup

4.1 Remote Control Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Use a screwdriver to loosen the screw and open the battery cover.
3. Insert two AAA (1.5V) batteries, ensuring correct polarity as indicated inside the compartment.
4. Replace the battery cover and tighten the screw.

Image: Diagram showing how to open the remote control's battery compartment and insert two AAA batteries.

4.2 Pairing the Remote Control with the Control Box

Before initial use, or if the remote control loses connection, you must pair it with the control box.

1. Ensure the remote control has fresh batteries installed.
2. Turn off the power switch on the children's riding toy.
3. On the remote control, press and hold the "▲" (Forward) and "▼" (Back) keys simultaneously for 3 seconds to initiate the pairing process. The first LED on the remote will flicker.
4. While the remote's LED is flickering, turn on the power switch of the riding toy.
5. The red indicator light on the remote control will stop flashing, indicating that the code matching is successful.

Image: The remote control and the JR-RX-12V control box shown side-by-side, illustrating the components involved in pairing.

5. Operating Instructions

Once paired, the remote control can be used to operate the children's riding toy.

• "S" Key (Speed Setting): Press the "S" key to cycle through speed settings. One LED lit indicates low speed, two LEDs indicate medium speed, and three LEDs indicate high speed.
• "▲" Key (Forward): Press to move the toy forward.
• "▼" Key (Back): Press to move the toy backward.
• "◀" Key (Left): Press to turn the toy left.
• "▶" Key (Right): Press to turn the toy right.
• "P" Key (Brake): Press and hold the "P" key to engage the brake. All LEDs on the remote will flicker when the brake is active.

6. Maintenance

• Keep the remote control and control box clean and dry. Avoid exposure to moisture or extreme temperatures.
• Regularly check the battery compartment for corrosion. Remove batteries if the remote will not be used for an extended period.
• Ensure all connections to the control box are secure and free from damage.

7. Troubleshooting

7.1 Remote Control Not Responding

• Check if the remote control batteries are correctly installed and have sufficient charge. Replace if necessary.
• Ensure the riding toy's power switch is turned on.
• Re-attempt the pairing process as described in Section 4.2.
• Verify that the control box is securely connected to the toy's wiring.

7.2 Toy Not Moving or Responding Erratically

• Confirm successful pairing of the remote control.
• Check the toy's battery level. A low battery can affect performance.
• Inspect all wiring connections to the control box and motor for looseness or damage.
• Ensure the control box model (JR-RX-12V or JR1630RX-12V) is compatible with your specific riding toy.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact the manufacturer or your point of purchase. Ensure you have your product model number (JR-RX-12V or JR1630RX-12V) and purchase details available when seeking assistance.