Introduction
Welcome to the user manual for your Cecotec Conga 1790 Ultra Robot Vacuum and Mop. This professional 4-in-1 robot is designed to sweep, vacuum, mop, and scrub your floors simultaneously, providing an efficient and intelligent cleaning experience. Equipped with iTech SmartGyro 3.0 navigation, a mixed tank, solid tank, magnetic strip, and remote control, the Conga 1790 Ultra simplifies your home cleaning routine.
Please read this manual carefully before using the product to ensure proper operation, maintenance, and to maximize its lifespan.
Figure 1: Cecotec Conga 1790 Ultra Robot Vacuum and Mop with its charging base, remote control, and a smartphone displaying the control app.
Package Contents
Before starting, ensure all components are present in the package:
- Cecotec Conga 1790 Ultra Robot Vacuum Cleaner
- Charging Base and Power Adapter
- Mixed Tank (for solids and liquids)
- Solid Tank
- Remote Control
- Magnetic Strip
- Side Brushes (2 sets)
- Main Brush (BestFriend Care system)
- Mop Cloths (2 units)
- High-Efficiency Filter (HEPA type)
- Cleaning Brush
- Instruction Manual
Setup
1. Charging the Robot
Place the charging base against a wall in an open area, ensuring there are no obstacles within 1 meter to the sides and 2 meters in front. Connect the power adapter to the base and plug it into a power outlet. Place the robot on the charging base, ensuring the charging pins align. The robot will indicate it is charging.
Figure 2: The robot vacuum automatically returning to its charging base to recharge its battery.
2. App Installation and Wi-Fi Connection
Download the "Conga" app from your smartphone's app store (available for Android and iOS). Follow the in-app instructions to connect your robot. Important: The robot only connects to 2.4 GHz Wi-Fi networks. If you have a dual-band router, ensure your phone is connected to the 2.4 GHz network during the setup process. You may need to temporarily disable the 5 GHz band on your router or phone if you encounter connection issues.
Figure 3: The Conga app on a smartphone, showing the virtual map and control options for the robot vacuum.
3. Preparing the Cleaning Area
Before starting a cleaning cycle, ensure the area is free of obstacles such as cables, small objects, and loose rugs that could entangle the robot. If using the mopping function, fill the mixed tank with water and, if desired, a small amount of non-corrosive floor cleaner.
Operating the Robot
Cleaning Modes
The Conga 1790 Ultra offers multiple cleaning modes:
- Auto Mode: The robot cleans the entire area systematically.
- Edge Mode: Cleans along walls and furniture edges.
- Spot Mode: Concentrates cleaning on a specific dirty area.
- Room Mode: Cleans a single room.
- Scrubbing Mode: Activates the mopping function.
Using the App Control
The Conga app provides comprehensive control over your robot. You can:
- Select cleaning modes and power levels (suction and scrubbing).
- Schedule cleaning times.
- View the virtual map of your home and cleaning history.
- Send the robot to its charging base.
Voice Assistant Integration
The Conga 1790 Ultra is compatible with Alexa and Google Assistant. Link your robot to your voice assistant to control it with simple voice commands, such as "Start cleaning," "Stop cleaning," or "Send the robot to the charging base."
Navigation (iTech SmartGyro 3.0)
The iTech SmartGyro 3.0 technology ensures an organized and efficient cleaning path. The robot uses gyroscopic, proximity, anti-shock, and anti-fall sensors to cover the entire cleaning surface of your home.
Figure 4: The robot vacuum actively mopping a hard floor surface, demonstrating its 4-in-1 capability.
Maintenance
Regular maintenance is crucial for optimal performance and longevity of your robot vacuum.
1. Emptying and Cleaning the Dustbin/Tanks
After each cleaning cycle, empty the solid tank. For the mixed tank, empty any remaining water and clean it thoroughly. Rinse both tanks with water and allow them to air dry completely before reinserting.
2. Cleaning Filters
The high-efficiency filter (HEPA type) should be cleaned regularly. Tap it gently to remove dust. Do not wash the HEPA filter with water. Replace filters periodically as recommended in the full manual or when performance decreases.
3. Cleaning Brushes
Regularly remove hair and debris from the main brush and side brushes. Use the provided cleaning tool to cut and remove tangled hair. Ensure the brushes spin freely after cleaning.
4. Cleaning Sensors and Charging Contacts
Wipe the robot's sensors and the charging contacts on both the robot and the charging base with a dry, soft cloth to ensure proper function and charging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot cannot connect to Wi-Fi. | Connected to 5 GHz Wi-Fi network; incorrect password; router issues. | Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network during setup. Temporarily disable 5 GHz on your router if necessary. Double-check Wi-Fi password. Restart router and robot. |
| Robot returns to charging base too early. | Low battery; internal sensor issue. | Allow the robot to fully charge. If it continues to return early with sufficient battery, try restarting the cleaning cycle via the app ("Stop" then "Clean"). |
| Robot gets stuck or tangled. | Cables, loose rugs, small objects on the floor. | Clear the cleaning area of obstacles before starting. Use the magnetic strip to block off problematic areas. |
| Poor cleaning performance. | Full dustbin; dirty filters/brushes; low suction power setting. | Empty the dustbin. Clean or replace filters and brushes. Increase suction power via the app. |
| Robot cannot find charging base. | Base is obstructed or too far; robot is too far from base. | Ensure the charging base is in an open area. Manually place the robot closer to the base if it's far away. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 1790 ULTRA |
| Brand | Cecotec |
| Functions | Sweep, Vacuum, Mop, Scrub |
| Navigation Technology | iTech SmartGyro 3.0 |
| Suction Power | Up to 2100 Pa (ForceClean System) |
| Battery Life | 160 Minutes |
| Noise Level | 64 dB |
| Filter Type | HEPA |
| Compatible Devices | Smartphones (App Control), Alexa, Google Assistant |
| Dimensions (L x W x H) | 32 x 32 x 7.3 cm |
| Product Weight | 5 kg |
| Color | Black |
Warranty and Support
For warranty information and technical support, please refer to the official Cecotec website or contact their customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, visit the Cecotec Store on Amazon.
