Introduction
Welcome to the Amazon Smart Soap Dispenser user manual. This document provides detailed instructions for setting up, operating, and maintaining your new automatic soap dispenser. The Amazon Smart Soap Dispenser is designed to enhance your handwashing experience with its automatic dispensing, 20-second timer, and optional Alexa integration.
Important Safety Information
- Indoor Use Only: This device is intended for indoor use only.
- Supported Soap Type: Only use liquid hand soaps. Do not fill with foaming soap or any alcohol-based products, including hand sanitizer. Using unsupported liquids may damage the dispenser and void the warranty.
- Water Resistance: The dispenser meets IP66 standards for water resistance, meaning it can withstand powerful water jets. However, it should not be immersed in water.
- Charging: Use only the provided Micro-USB charging cable. Ensure the charging port is dry before connecting the cable.
- Children: Keep out of reach of small children. Adult supervision is recommended when children use the device.
Package Contents
Verify that all items are present in your package:
- Amazon Smart Soap Dispenser
- Micro-USB Charging Cable
- Quick Start Guide
Product Overview
Familiarize yourself with the components of your Amazon Smart Soap Dispenser.
Image Description: A white, conical Amazon Smart Soap Dispenser with a silver base. The dispenser features a nozzle on the front and a circular top surface with several small LED lights and a central button. This image shows the overall design of the device.
- Soap Nozzle: Where soap is dispensed.
- Motion Sensor: Detects hand placement for automatic dispensing.
- LED Timer Lights: A ring of lights on the top surface that illuminates to count down 20 seconds during handwashing.
- Routines Button: A central button on the top surface to enable or disable Alexa Routines.
- Soap Reservoir: Internal container for liquid soap.
- Charging Port: Located on the back, covered by a flap, for the Micro-USB charging cable.
- Power Button: Located near the charging port.
Setup Guide
1. Charging the Dispenser
Before initial use, fully charge your dispenser. A single charge can last up to three months depending on usage and Echo device pairing.
- Locate the Micro-USB charging port on the back of the dispenser, usually covered by a small flap.
- Connect the provided Micro-USB cable to the dispenser and a power source (e.g., USB wall adapter, computer USB port).
- The LED indicator will show charging status. Once fully charged, disconnect the cable.
Image Description: A close-up view of the back of the Amazon Smart Soap Dispenser, showing the Micro-USB charging cable plugged into the port. The port is located under a small protective flap.
2. Filling with Soap
The dispenser has a maximum capacity of 12 fl. oz.
- Twist the top section of the dispenser counter-clockwise to remove it from the base.
- Carefully pour liquid hand soap into the reservoir. Do not exceed the "MAX FILL" line, which is typically about halfway up the container.
- Ensure you are using only liquid hand soap. Do not use foaming soap or alcohol-based sanitizers.
- Replace the top section by aligning it and twisting clockwise until secure.
3. Connecting to Alexa (Optional)
To utilize smart features and Alexa Routines, connect your dispenser to the Alexa app.
- Download and open the Amazon Alexa app on your smartphone or tablet.
- Follow the in-app instructions to add a new device. You may need to scan a barcode found on the Quick Start Guide.
- Ensure your dispenser is within range of a 2.4 GHz Wi-Fi network. It does not support 5GHz networks.
- Once connected, you can set up custom Alexa Routines.
Image Description: The Amazon Smart Soap Dispenser placed on a bathroom counter next to a small Echo device (panda-shaped). A child is washing hands at the sink, illustrating the use of the dispenser with an Echo device for an enhanced experience.
Operating Instructions
Automatic Soap Dispensing
The dispenser uses a motion sensor for touch-free operation.
- Place your hand under the soap nozzle. The motion sensor will detect your hand.
- Soap will be dispensed automatically.
- Variable Dispensing: The amount of soap dispensed can be controlled by how far you place your hand under the nozzle. Placing your hand closer to the nozzle typically results in less soap, while placing it further away provides more.
Image Description: A hand positioned under the nozzle of the Amazon Smart Soap Dispenser, with drops of liquid soap falling onto the palm. This illustrates the touch-free dispensing feature and how the amount of soap can vary.
20-Second Handwashing Timer
The integrated LED timer helps ensure you wash your hands for the recommended duration.
- After soap is dispensed, the ring of LED lights on the top of the dispenser will illuminate.
- The lights will gradually extinguish over a 20-second period, indicating the recommended handwashing time.
- Once all lights are off, you have completed the 20-second wash cycle.
Image Description: A close-up, top-down view of the Amazon Smart Soap Dispenser. The circular top surface shows several small LED lights illuminated, indicating the 20-second handwashing timer is active.
Alexa Routines (with compatible Echo device)
If paired with an Echo device, you can create custom Alexa Routines.
- In the Alexa app, navigate to Routines.
- Create a new Routine with the "When this happens" trigger set to your Smart Soap Dispenser.
- You can configure Alexa to play music, tell a joke, or say a custom phrase when you start washing your hands.
Disabling Routines
To temporarily disable Alexa Routines without unpairing the device:
- Press the central button on the top of the dispenser.
- When the button is lit, Routines are disabled. The 20-second timer lights will still function.
Maintenance
Cleaning the Dispenser
To keep your dispenser clean and functional:
- Wipe the exterior of the device with a dry or damp cloth.
- Do not use abrasive cleaners or immerse the dispenser in water.
- If the nozzle becomes clogged, gently clean it with a soft brush or cloth.
Soap Type
Only use standard liquid hand soaps. Foaming soaps, hand sanitizers, or other alcohol-based products are not compatible and can damage the internal pump mechanism.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser not dispensing soap. | Low battery, empty soap reservoir, clogged nozzle, sensor obstruction. | Charge the dispenser. Refill with liquid hand soap. Clean the nozzle. Ensure nothing is blocking the motion sensor. |
| LED timer lights not working. | Device not powered on, malfunction. | Ensure the device is charged and powered on. If the issue persists, contact support. |
| Alexa Routines not triggering. | Dispenser not connected to Wi-Fi, Routines disabled, Echo device not compatible or connected. | Check Wi-Fi connection in Alexa app. Ensure Routines are enabled (central button not lit). Verify Echo device compatibility and connection. |
| Poor battery life. | Frequent dispensing, Echo device paired, high-dispensing mode enabled. | Battery life varies with usage. Reduce dispensing frequency or disable Echo pairing if extended battery life is critical. |
Specifications
| Feature | Detail |
|---|---|
| Model | Smart Soap Dispenser (B08GWRT223) |
| Dimensions | 3.65” X 6.1” X 3.97” |
| Weight | 326g (Actual size and weight may vary) |
| Max Soap Capacity | 12 fl. oz. |
| Supported Soap Type | Liquid hand soaps only. Do not use foaming soap or alcohol-based products. |
| Network Connectivity | 2.4 GHz 802.11 b/g/n Wi-Fi only (Does not support 5GHz) |
| Use Environment | Indoor use only |
| Water Resistance | IP66 standard (Resistant to powerful water jets, not immersion) |
| Battery Life | Up to 3 months (without Echo pairing, 10 dispenses/day); Up to 2.66 months (with Echo pairing, 10 dispenses/day). Varies by usage. |
| Echo Compatibility | Compatible with Echo (2nd Gen+), Echo Dot (2nd Gen+), Echo Plus, Echo Show, Echo Spot, Echo Input, Echo Studio, Echo Flex. Not compatible with Echo Glow, Frames, Buds, Auto, Sub, Link. |
Warranty and Support
Your Amazon Smart Soap Dispenser comes with a 1-year limited warranty. For detailed warranty terms and conditions, please refer to the official Amazon website or the documentation included with your product.
For additional help, troubleshooting common issues, or to view questions and answers from other Amazon customers, visit the Amazon Digital and Device Forum or the official Amazon support pages for this product.
- Online Support: Amazon Device Support
- Community Forum: Amazon Digital and Device Forum
