Garnier Color Sensation S11 Ultra Light Smoky Blonde Hair Color Instruction Manual

1. Introduction

Thank you for choosing Garnier Color Sensation S11 Ultra Light Smoky Blonde permanent hair color. This product is designed to provide intense, long-lasting color with a luminous finish. Please read this instruction manual carefully before use to ensure optimal results and safety.

2. Important Safety Information

Hair colorants can cause severe allergic reactions. It is essential to follow these precautions:

• Perform an allergy alert test 48 hours before each use of this product, even if you have already used coloring products before.
• Do not color your hair if you have a rash on your face or sensitive, irritated, or damaged scalp.
• Do not use to dye eyelashes or eyebrows.
• Wear suitable gloves provided in the kit throughout the application process.
• Avoid contact with eyes. Rinse eyes immediately and thoroughly if product comes into contact with them.
• Keep out of reach of children.

3. Package Contents

Your Garnier Color Sensation kit typically includes:

• 1 x Developer Cream
• 1 x Colorant Cream
• 1 x After-Color Conditioner
• 1 x Pair of Gloves
• 1 x Instruction Leaflet

4. Setup and Preparation

Before you begin, ensure you have everything ready:

1. Read the entire instruction leaflet: Familiarize yourself with all steps.
2. Perform Allergy Alert Test: 48 hours prior to application.
3. Gather Tools: You will need a non-metallic bowl (if not using applicator bottle), a non-metallic stirrer, a timer, an old towel to protect your clothes, and petroleum jelly to protect your hairline.
4. Protect Surfaces: Cover your work area to prevent staining.
5. Hair Condition: For best results, apply to dry, unwashed hair.

Image: Front view of the Garnier Color Sensation S11 Ultra Light Smoky Blonde hair color box, showing the product name, shade number, and a model with light blonde hair.

5. Operating Instructions (Application)

Follow these steps carefully for optimal coloring results:

Step 5.1: Mixing the Color

1. Put on the gloves provided.
2. Unscrew the cap of the Developer Cream bottle.
3. Pierce the seal of the Colorant Cream tube with the cap.
4. Squeeze the entire contents of the Colorant Cream tube into the Developer Cream bottle.
5. Replace the cap on the Developer Cream bottle and shake vigorously for 30 seconds until the mixture is uniform.
6. Immediately twist off the tip of the applicator cap to prevent the bottle from bursting.

Step 5.2: Application

Choose the application method relevant to your needs:

Full Head Application (First Time Coloring or Significant Root Growth)

1. Apply the mixture to dry, unwashed hair, starting at the roots.
2. Distribute the remaining mixture evenly through the lengths and ends of your hair.
3. Massage the product into your hair to ensure even saturation.
4. Leave on for 30 minutes. For resistant grey hair, you may extend to 35 minutes.

Root Touch-Up Application (Previously Colored Hair)

1. Apply two-thirds of the mixture to the roots of dry, unwashed hair, focusing on areas with visible regrowth.
2. Leave on for 20 minutes.
3. Apply the remaining mixture to the lengths and ends of your hair.
4. Leave on for an additional 10 minutes.

Step 5.3: Rinsing and Conditioning

1. After the processing time, add a small amount of warm water to your hair and gently massage to emulsify the color.
2. Rinse hair thoroughly with warm water until the water runs clear.
3. Apply the After-Color Conditioner to your hair. Leave on for 2-3 minutes.
4. Rinse thoroughly.

6. Maintenance and Aftercare

To help maintain the vibrancy and health of your colored hair:

• Use color-safe shampoos and conditioners.
• Limit washing frequency to preserve color.
• Protect hair from excessive sun exposure and chlorine.
• Consider using heat protectant sprays when styling with heat tools.

7. Troubleshooting

If you encounter any issues, consider the following:

• Color not as expected: Ensure correct processing time was followed. Hair porosity and previous treatments can affect the final shade.
• Scalp irritation: If irritation occurs during or after application, rinse immediately. Consult a medical professional if symptoms persist. This could indicate an allergic reaction if the patch test was not performed or was negative.
• Uneven color: Ensure the product was applied evenly and saturated all hair strands. Sectioning hair can help achieve more uniform application.

8. Specifications

9. Warranty and Support

Specific warranty information for this product is not provided in the available data. For product support, questions, or concerns, please refer to the contact information provided on the product packaging or visit the official Garnier website.