Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Furinno Tidur Nightstand. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This product is designed to offer convenient storage and a functional surface for your bedroom, closet, or dorm room.
Image: A single Furinno Tidur Nightstand in Americano finish, featuring a drawer and an open storage shelf, positioned beside a bed.
Safety Information
WARNING: Keep away from naked flame or direct heat sources.
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not overload the nightstand. Refer to the 'Specifications' section for weight capacities.
- Keep small parts and hardware away from children during assembly to prevent choking hazards.
Package Contents
Before assembly, verify that all components and hardware are present. If any parts are missing or damaged, please contact customer support.
Included Components:
- Shelf Panels
- Hardware Pack (screws, cam locks, dowels, knob)
- Assembly Guide
Note: This product is a 2-pack, meaning you will receive components for two individual nightstands.
Setup and Assembly Instructions
Assembly is required for this nightstand. Please follow the step-by-step instructions provided in the included assembly guide. A screwdriver is the recommended tool for assembly.
General Assembly Steps:
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list in your assembly guide to identify each piece.
- Attach Cam Locks and Dowels: Insert cam locks and wooden dowels into the designated holes on the panels as shown in the assembly diagram. Ensure they are fully seated.
- Assemble Frame: Connect the side panels to the top and bottom panels using the cam locks and screws. Ensure all connections are snug.
- Install Drawer Slides: Attach the drawer slides to the inner side panels of the nightstand frame.
- Assemble Drawer: Construct the drawer box by connecting the drawer sides, front, and back. Insert the drawer bottom into the grooves. Attach the drawer knob.
- Insert Drawer: Carefully slide the assembled drawer into the nightstand frame, aligning it with the installed drawer slides.
- Attach Back Panel: Secure the back panel to the rear of the nightstand using small nails or screws provided.
- Final Check: Verify that all connections are secure and the nightstand is stable.
Image: Exploded diagram illustrating the various components and their assembly sequence for the Furinno Tidur Nightstand.
Operating Instructions
The Furinno Tidur Nightstand is designed for simple and functional use.
Drawer Usage:
- To open the drawer, gently pull the knob handle.
- To close the drawer, push it back until it is flush with the nightstand frame.
- Avoid forcing the drawer if it feels stuck; ensure no items are obstructing its path.
Open Shelf Usage:
- The open shelf provides easy access storage for books, magazines, or decorative items.
- Distribute weight evenly on the shelf to maintain stability.
Maintenance
Proper care will extend the life and appearance of your nightstand.
- Cleaning: Wipe clean with a clean, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or damage to the engineered wood.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
- Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
- Stability Check: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
Troubleshooting
If you encounter issues with your nightstand, consider the following common solutions:
- Wobbly Nightstand: Ensure all assembly screws and cam locks are fully tightened. Check that the nightstand is placed on a level surface.
- Drawer Not Sliding Smoothly: Verify that the drawer slides are correctly installed and aligned. Check for any obstructions within the drawer tracks.
- Missing Parts: If you find any parts missing during assembly, refer to the 'Package Contents' section and contact customer support for assistance.
Specifications
| Brand | Furinno |
| Model Name | Tidur |
| Model Number | 219153BOK |
| Product Dimensions (D x W x H) | 15.67" x 17.72" x 24.14" (39.8 cm x 45.0 cm x 61.3 cm) |
| Item Weight | 21.3 pounds (per unit) |
| Maximum Weight Recommendation | 45 pounds (Total support) |
| Frame Material | Engineered Wood |
| Color | Americano (with Black Oak top) |
| Style Name | 2-Pack Knob |
| Number of Drawers | 1 (per unit) |
| Number of Shelves | 1 (per unit) |
| Tools Recommended For Assembly | Screwdriver |
Image: Detailed dimensional drawing of the nightstand, indicating measurements in inches and centimeters for height, width, and depth.
Warranty
This Furinno Tidur Nightstand comes with a 1-year limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding coverage and claims, refer to the warranty information included with your product or contact Furinno customer service.
Customer Support
For any questions, concerns, or assistance with your Furinno Tidur Nightstand, please refer to the contact information provided in your product packaging or visit the official Furinno website for support resources.