1. Introduction and Overview
The Banks Power 64310 PedalMonster is an advanced throttle sensitivity controller designed to enhance vehicle responsiveness. This device connects to your vehicle's OBD-II port, offering precise control over throttle input. It features multiple driving modes and adjustable settings to customize your driving experience.
Key features include:
- OBD-II connected for optimal performance and safety.
- Multiple driving modes: City, Sport, and Track.
- 30 levels of fine-tuned control within each mode.
- Adjustable low-speed trim for enhanced control at lower speeds.
- Reverse safety feature to prevent unintended acceleration.
- ActiveSafety circuitry for reliable operation.
Figure 1: The Banks Power PedalMonster unit, its OBD-II connector, and a smartphone displaying the control application interface.
2. Setup and Installation
Before beginning installation, ensure your vehicle is turned off and the ignition key is removed. Gather all components included in the package.
Figure 2: All components of the Banks Power PedalMonster kit, including the main module, OBD-II cable, and necessary wiring harnesses.
2.1 Package Contents
- Banks Power PedalMonster Module
- OBD-II Connection Cable
- Vehicle-Specific Wiring Harness
- Jumper Wire (if applicable for your vehicle)
2.2 Installation Steps
- Locate the Accelerator Pedal Sensor: Identify the accelerator pedal sensor connector, typically located near the top of the accelerator pedal assembly.
- Disconnect the Sensor: Carefully disconnect the factory wiring harness from the accelerator pedal sensor.
- Connect PedalMonster Harness: Connect the Banks Power vehicle-specific wiring harness inline with the accelerator pedal sensor. One end connects to the factory pedal sensor, and the other end connects to the factory wiring harness. Ensure connections are secure.
- Connect to PedalMonster Module: Plug the other end of the Banks Power harness into the PedalMonster module.
- Connect OBD-II Cable: Locate your vehicle's OBD-II port (usually under the dashboard on the driver's side). Connect the provided OBD-II cable to the port and then to the PedalMonster module.
- Secure the Module: Mount the PedalMonster module in a secure location away from moving parts and excessive heat. Use zip ties or double-sided tape if necessary.
- Download the App: Download the Banks Power app from your smartphone's app store.
- Pair with App: Turn on your vehicle's ignition (do not start the engine). Open the Banks Power app and follow the on-screen instructions to pair your smartphone with the PedalMonster module via Bluetooth.
Figure 3: Detailed view of the Banks Power PedalMonster wiring harness connectors, showing the male and female ends for inline installation.
For specific vehicle installation details, refer to the detailed instructions provided with your product or visit the Banks Power website.
3. Operating Instructions
The Banks Power PedalMonster is controlled wirelessly via the Banks Power smartphone application. This app allows you to select different driving modes and fine-tune throttle response.
Figure 4: A hand holding a smartphone, illustrating the Banks Power PedalMonster application interface with various mode selections.
3.1 Driving Modes
- Stock: Reverts the throttle response to the vehicle's factory settings.
- City: Provides a moderate increase in throttle sensitivity, suitable for daily driving and urban environments.
- Sport: Offers a more aggressive throttle response, ideal for spirited driving and improved acceleration.
- Track: Delivers the most immediate and aggressive throttle response for maximum performance on closed courses.
3.2 Adjusting Sensitivity
Within each mode (City, Sport, Track), you can select from 30 distinct levels of throttle sensitivity. Use the up and down arrows within the app to increase or decrease the responsiveness to your preference.
3.3 Advanced Features
- Adjustable Low-Speed Trim: Fine-tune throttle response specifically for low-speed maneuvers, enhancing control during parking or off-road driving.
- Reverse Safety: The PedalMonster automatically reverts to stock throttle settings when the vehicle is in reverse, preventing unintended aggressive acceleration.
- ActiveSafety Circuitry: This feature continuously monitors vehicle parameters via the OBD-II port, ensuring safe operation and preventing potential issues.
4. Maintenance
The Banks Power PedalMonster is designed for maintenance-free operation. Periodically check all connections to ensure they remain secure. Keep the module free from excessive dirt or moisture. No user-serviceable parts are contained within the unit.
5. Troubleshooting
- No Connection to App:
- Ensure the vehicle's ignition is on (engine off).
- Verify Bluetooth is enabled on your smartphone.
- Check that the PedalMonster module is securely connected to the vehicle's wiring harness and OBD-II port.
- Restart the app and attempt to pair again.
- No Noticeable Improvement in Throttle Response:
- Confirm the PedalMonster is set to a mode other than "Stock" and the sensitivity level is increased.
- Ensure all connections are firm.
- Verify the PedalMonster is receiving power (check for indicator lights on the module, if present).
- Vehicle Malfunction (e.g., A/C not working, limp mode):
- Immediately disconnect the PedalMonster module from the vehicle.
- Reconnect the factory accelerator pedal sensor wiring.
- If the issue persists after disconnecting the PedalMonster, consult a qualified mechanic.
- Contact Banks Power customer support for assistance.
- Missing or Incorrect Parts:
- If any parts are missing or do not match your vehicle, contact your retailer or Banks Power customer support immediately. Do not attempt installation with incorrect components.
6. Specifications
| Model Number | 64310 |
| Brand | Banks Power |
| Item Weight | 14.9 ounces |
| Product Dimensions | 10 x 4.8 x 4 inches |
| Manufacturer Part Number | 64310 |
| ASIN | B08GN9LTCP |
| Date First Available | August 25, 2020 |
7. Warranty and Support
Specific warranty details for the Banks Power 64310 PedalMonster are not provided in this manual. For comprehensive warranty information, product registration, and technical support, please visit the official Banks Power website or contact their customer service department directly.
It is recommended to retain your proof of purchase for warranty claims.
