Rowenta X-Plorer Serie 95 Robot Vacuum Cleaner - Instruction Manual

Introduction

This manual provides essential information for the safe and efficient operation of your Rowenta X-Plorer Serie 95 Robot Vacuum Cleaner. Please read these instructions carefully before using the appliance and keep them for future reference.

The Rowenta X-Plorer Serie 95 is an advanced robot vacuum cleaner designed for comprehensive home cleaning. It features a powerful BLDC motor for strong suction (up to 12,000 Pa), 4-in-1 cleaning action (sweeping, vacuuming, mopping, scrubbing), and precise laser navigation for efficient mapping and cleaning.

Safety Instructions

Important Safety Information:

• Always ensure the appliance is switched off and unplugged before cleaning or performing maintenance.
• This appliance is for household use only. Do not use it outdoors or on wet surfaces.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bin and/or filters in place.
• Supervise children to ensure they do not play with the appliance.
• Only use attachments recommended by the manufacturer.
• Do not immerse the appliance in water or other liquids.
• Ensure the charging base is placed on a flat, stable surface against a wall, with clear space around it.

Product Overview

Familiarize yourself with the components of your Rowenta X-Plorer Serie 95 robot vacuum cleaner.

Figure 1: The Rowenta X-Plorer Serie 95 Robot Vacuum Cleaner, showing its sleek design and main body.

Main Components:

• Robot Main Unit: Contains the motor, battery, and navigation system.
• Dust Bin: Collects dust and debris.
• Water Tank & Mop Pad Holder: For mopping functionality.
• Side Brushes: Sweep debris into the main brush path.
• Main Brush: Agitates and collects dirt from floors.
• Charging Base: Where the robot returns to recharge.
• Power Adapter: Connects the charging base to the power outlet.
• High-Efficiency Filter: Captures fine particles.
• Lidar Sensor: For precise laser navigation and mapping.

Included Accessories:

• 3 different central brushes (e.g., standard, animal hair, soft).
• 1 mop pad support with 3 dedicated mop pads (general use, animal-specific, anti-allergenic electrostatic).
• Cleaning tool for brushes and filter.

Setup

1. Unpacking and Placement:

1. Carefully remove all components from the packaging.
2. Choose a suitable location for the charging base. It should be against a wall, on a hard, flat surface, with at least 0.5 meters of clear space on either side and 1.5 meters in front.
3. Plug the power adapter into the charging base and then into a wall outlet. Ensure the cable is not obstructing the robot's path.

2. Initial Charging:

1. Place the robot on the charging base. Ensure the charging contacts on the robot align with those on the base.
2. Allow the robot to fully charge before its first use. This typically takes several hours. The indicator light on the robot will change to show charging status.

3. App Installation and Connection:

1. Download the free Rowenta X-Plorer app from your smartphone's app store (available for iOS and Android).
2. Follow the in-app instructions to connect your robot to your home Wi-Fi network. This will enable advanced features like personalized scheduling, zone cleaning, and real-time monitoring.
3. The robot is compatible with voice assistants like Amazon Alexa and Google Assistant. Refer to the app for setup instructions.

Operating Instructions

1. First Use and Mapping:

1. Before the first cleaning cycle, clear the floor of any small objects, cables, or fragile items.
2. Start a cleaning cycle via the app or by pressing the button on the robot. The robot will begin to map your home using its precise laser navigation system.
3. Allow the robot to complete its first full cleaning cycle without interruption to create an accurate map.
4. Once mapped, you can use the app to define no-go zones, specific cleaning areas, and save up to 4 permanent maps for different floors.

2. Cleaning Modes and Settings:

• Suction Power: The robot offers multiple suction power levels, including a silent mode and a maximum power mode (up to 12,000 Pa). The Auto-Boost function automatically adjusts suction power based on floor type (e.g., increases on carpets).
• Mopping Function:
  1. Attach the desired mop pad to the mop pad holder and fill the water tank with clean water.
  2. Insert the water tank assembly into the robot.
  3. Control the water flow level via the app. The automatic water level control prevents excessive moisture, keeping carpets dry.
  4. Use the app to define "no-mop zones" for carpeted areas.
• Scheduling: Use the app to set personalized cleaning schedules for different rooms and times.

3. Battery and Charging:

• The robot is equipped with a long-lasting 5200 mAh Lithium-ion battery, providing up to 225 minutes of runtime, covering approximately 220 square meters on a single charge.
• When the battery is low, the robot will automatically return to its charging base.
• If a cleaning cycle is interrupted due to low battery, the robot will resume cleaning from where it left off after recharging.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum cleaner.

1. Emptying the Dust Bin:

• Press the release button to remove the dust bin.
• Open the dust bin and empty its contents into a waste bin.
• Clean the dust bin with a dry cloth. Do not wash the dust bin with water unless specified in the full manual.

2. Cleaning Filters:

• Remove the high-efficiency filter from the dust bin.
• Tap the filter gently over a waste bin to remove dust. Do not wash the filter with water.
• Replace the filter regularly (e.g., every 6 months or as indicated by the app/robot).

3. Cleaning Brushes:

• Remove the main brush and side brushes.
• Use the provided cleaning tool to remove hair and debris tangled around the brushes.
• Wipe the brushes with a dry cloth.

4. Cleaning Mop Pads and Water Tank:

• Remove the mop pad after each use and wash it by hand or machine (follow care instructions on the pad).
• Empty any remaining water from the water tank and rinse it thoroughly. Allow it to air dry.

5. Cleaning Sensors and Charging Contacts:

• Wipe the robot's sensors (Lidar, anti-drop, bumper) and charging contacts with a clean, dry cloth.
• Also clean the charging contacts on the charging base.

Troubleshooting

If you encounter issues with your robot vacuum cleaner, refer to the following common problems and solutions.

For further assistance, consult the full user manual available online or contact Rowenta customer support.

Specifications

Warranty and Support

Your Rowenta X-Plorer Serie 95 Robot Vacuum Cleaner comes with a 2-year warranty.

Rowenta is committed to product reparability. Spare parts and repair services are available for up to 15 years from the date of purchase.

Figure 2: Rowenta's commitment to 15 years of reparability.

For warranty claims, technical support, or to find an authorized service center, please visit the official Rowenta website or contact their customer service department.

Online Resources: www.rowenta.com

Video Resources

No relevant official product videos from the seller were found in the provided data to embed in this manual.