1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Poolexa 10 Inch LED Multicolor Inground Pool Light. This LED pool light is designed as a direct replacement for existing wet niche pool lighting systems, eliminating the need for additional rings, gaskets, or housing. It features a durable stainless steel construction and offers customizable multicolor lighting options.
2. Safety Information
WARNING: Risk of Electric Shock. Installation must be performed by a qualified electrician and conform to all national and local electrical codes. Always disconnect power at the circuit breaker before attempting any installation, service, or maintenance.
- Ensure the power supply is 12V AC/DC. The included controller integrates a 12V transformer.
- Do not operate the light if the cable or housing is damaged.
- Keep children away from the installation area.
- Ensure proper grounding according to local electrical codes.
- The light is designed for wet niche installation only.
3. Package Contents
Verify that all components are present before beginning installation:
- 10 Inch LED Multicolor Inground Pool Light
- 150 Foot Cord (pre-attached to light)
- Outdoor Control Box with integrated 12V transformer
Image 3.1: Overview of the Poolexa 10 Inch LED Multicolor Inground Pool Light, including the light fixture, 150-foot power cord, and the outdoor control box.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | Poolexa |
| Model Number | 717373633406 |
| Dimensions (Light) | 10.2"L x 10.2"W x 1"H |
| Material | 316L Stainless Steel (Housing), Glass (Shade) |
| Voltage | 12 Volts AC/DC |
| Wattage | 54 watts |
| Brightness | 4320 Lumens |
| Light Color | Multicolor (20 programs) |
| Control Method | Manual, Bluetooth App (iOS/Android) |
| Water Resistance Level | Water Resistant |
| Cord Length | 150 feet |
| Manufacturer | Jusvic |
5. Setup and Installation
This LED pool light is designed for direct installation into existing wet niches. No additional housing, ring, or gasket is required for replacement.
5.1 Compatibility
The Poolexa 10 Inch LED Pool Light is compatible with the following manufacturer's wet niche fixtures:
- Jandy Pro Series: PLNICLRG, PLNICVFLRG, SSNICLRG1R, SSNICLRG1S
- Pentair: 620004, 78210200 thru 700, 78210401, 79206700
- Hayward DuraNiche: SP0600U, SP0607U
- Sta-Rite: 05161-2352 thru 2369, 05163-2395 thru 2396
Image 5.1: Niche compatibility for Poolexa LED pool lights, illustrating how the 10-inch light fits large niches for both concrete and vinyl/fiberglass pools.
5.2 Wiring and Electrical Connections
The outdoor control box includes an integrated 12V transformer, eliminating the need for a separate transformer. Connect the 120V supply to the control box as shown in the diagram below. Ensure all connections are secure and waterproof.
Image 5.2: Simplified wiring diagram illustrating the connection of the 120V supply to the outdoor control box and the light fixture.
Image 5.3: Detailed installation diagram showing the placement of the junction box and control box, minimum distances, rigid conduit, and the #8 AWG ground connector bonding at the rear of the niche. It also indicates coiling 4 ft of light cable around the fixture.
5.3 Light Installation
- Ensure power to the pool light circuit is OFF at the main breaker.
- Remove your existing pool light fixture from the wet niche.
- Carefully pull the old light's cable through the conduit. If replacing, attach the new light's cable to the old one to assist in pulling it through.
- Feed the new Poolexa light cable through the conduit to the junction box/control box location.
- Coil approximately 4 feet of the light cable around the fixture before seating it into the niche. This slack is crucial for future servicing.
- Secure the light fixture into the wet niche using the existing screw hole. The adjustable retainer tab on the back of the light helps ensure a snug fit.
Image 5.4: Rear view of the Poolexa pool light, highlighting the adjustable retainer tab used for securing the light within the wet niche.
5.4 Multiple Lights with One Controller
The Poolexa controller can manage multiple lights. The following combinations are supported:
- Three 6-inch lights
- Two 6-inch lights and one 10-inch light
- One 6-inch light and one 10-inch light
Image 5.5: Illustration of how different quantities and sizes of Poolexa LED lights (6-inch and 10-inch) can be connected and controlled by a single Poolexa controller.
6. Operating Instructions
Your Poolexa LED pool light can be controlled manually via the outdoor control box or wirelessly via a Bluetooth application on your smartphone.
6.1 Manual Control
The outdoor control box features buttons for direct control:
- Manual Control: Cycles through preset colors and programs.
- Color Buttons (White, Red, Green, Yellow, Cyan, Blue, Purple): Selects a static color.
- Steady: Activates a steady light mode.
- Gradient: Activates a color gradient mode.
- Dimmer Up/Down: Adjusts brightness.
- Speed Up/Down: Adjusts the speed of dynamic programs.
- RGB Gradient: Activates an RGB color gradient.
6.2 Bluetooth App Control
The light is compatible with iOS and Android devices for Bluetooth control. Download the dedicated app (refer to the control box for app name/QR code) to access advanced features and customize your lighting experience.
- Pairing: Follow the app's instructions to pair your device with the control box.
- Color Programs: Choose from 20 different color programs to create various atmospheres.
- Customization: Adjust brightness, speed, and create custom color sequences.
Image 6.1: Examples of the various static colors (Red, Green, Blue, White, Purple, Yellow, Cyan) and dynamic programs available with the Poolexa LED pool light, demonstrating its capability to display 18 different programs.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your pool light.
- Cleaning: Periodically clean the light's lens to remove any algae or mineral deposits that may obstruct light output. Use a soft brush or cloth and mild pool-safe cleaner.
- Inspection: Annually inspect the power cord for any signs of wear, cuts, or damage. Check the control box for water ingress or corrosion.
- Winterization: If applicable, follow standard pool winterization procedures. Ensure the light remains submerged if the pool is drained below the light level.
8. Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power, faulty wiring, control box issue | Check circuit breaker. Verify all wiring connections. Ensure control box is receiving 120V input. |
| Light flickers or changes color erratically | Loose connection, power fluctuation, internal fault | Check all electrical connections. Ensure stable power supply. If problem persists, contact support. |
| Bluetooth app cannot connect | Out of range, Bluetooth off, app issue | Ensure you are within Bluetooth range (approx. 20-30 feet). Verify Bluetooth is enabled on your device. Restart the app and control box. |
| Colors are not vibrant or appear incorrect | Dirty lens, low voltage | Clean the light lens. Verify the 12V output from the control box. |
9. Warranty and Support
The Poolexa 10 Inch LED Multicolor Inground Pool Light is backed by a 2-year manufacturer's warranty from the date of purchase, covering defects in materials and workmanship.
Image 9.1: The Poolexa 10 Inch LED Multicolor Inground Pool Light, highlighting the included 2-year manufacturer warranty.
For warranty claims or technical assistance, please contact Poolexa customer support through your retailer or the official Poolexa website. Please have your purchase receipt and product model number (717373633406) available when contacting support.
