ODK Bar Stools Set of 2 Instruction Manual

Introduction

Thank you for purchasing the ODK Bar Stools Set of 2. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

Safety Information

• Ensure all parts are present and undamaged before beginning assembly.
• Assemble the stools on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly, as this may damage the components.
• Periodically check all connections and tighten them as necessary to maintain stability.
• Do not stand on the stools or use them for purposes other than seating.
• Keep children away from the assembly area and small parts.

Package Contents

Please verify that all the following components are included in your package:

• Seat Tops (2)
• Leg Frames (2 sets, each including 4 legs and footrest bars)
• Assembly Hardware (screws, washers, Allen wrench)
• Instruction Manual (this document)

Image: Two ODK bar stools, showcasing the complete product.

Assembly Instructions

Assembly typically takes less than 10 minutes. All necessary tools are included.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, flat surface to prevent damage.
2. Attach Seat Top to Leg Frame: Align one seat top with the pre-drilled holes on the top of one leg frame. Insert the provided screws and washers, then partially tighten them with the Allen wrench. Do not fully tighten yet.
3. Secure Footrests: Ensure the footrest bars are securely integrated into the leg frame. The frame is designed with reinforced metal for stability.
4. Final Tightening: Once all screws are in place for the first stool, gradually tighten all screws evenly until secure. Repeat the process for the second stool.
5. Check Stability: After assembly, gently shake each stool to ensure it is stable and all connections are firm.

Image: Detail of the stool's reinforced metal frame and secure screw washer.

Image: Stool dimensions for reference during assembly and placement.

Operating Instructions

The ODK Bar Stools are designed for seating at counter-height surfaces. To ensure safe and proper use:

• Always sit centrally on the stool to maintain balance.
• Avoid sudden movements or leaning excessively to one side.
• Do not exceed the safe weight capacity of the stool.
• Ensure the stool is placed on a flat, stable surface before use. The feet are designed to be slip-resistant.

Maintenance and Care

Proper care will extend the life and appearance of your ODK Bar Stools:

• Cleaning: Wipe the seat and frame with a damp cloth. For stubborn marks, use a mild soap solution and dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Seat Top: The industrial wood seat top is waterproof, non-slip, and scratch-resistant. Promptly wipe away any spills to maintain its condition.
• Frame: The metal frame is reinforced for durability. Regularly check for any signs of rust or damage and address them promptly.
• Hardware: Periodically inspect all screws and bolts to ensure they remain tight. Retighten as needed to prevent wobbling.

Image: Detail of the stool's waterproof and scratch-resistant seat top.

Troubleshooting

If you encounter any issues with your ODK Bar Stools, refer to the following common solutions:

• Stool Wobbles: Ensure all screws are fully and evenly tightened. Check that the stool is on a flat, even surface.
• Loose Parts: If any parts feel loose, re-tighten the corresponding screws using the provided Allen wrench.
• Scratches on Floor: The feet are designed to be slip-resistant. If you notice floor scratching, ensure no debris is stuck to the feet and consider using additional floor protectors.

Specifications

Warranty and Support

Your satisfaction is our priority. If you have any questions, concerns, or require assistance with your ODK Bar Stools, please contact our customer service team. We are committed to providing quick replies and easy replacements for any issues you may encounter.

For support, please refer to the contact information provided at the point of purchase or visit the official ODK website.