Introduction
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Redragon GS520 RGB Desktop Speakers. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Package Contents
Verify that all items are present in the package:
- 2 x Stereo Speakers
Image: The Redragon GS520 RGB Desktop Speakers, showing both units with their RGB lighting active.
Setup
Follow these steps to set up your Redragon GS520 speakers:
- Placement: Position the two stereo speakers on either side of your monitor or desired listening area. Ensure they are within 31 inches (80 cm) of each other, as this is the maximum cable length between the two units.
- Power Connection: Connect the USB cable from the speakers to an available USB port on your PC, laptop, or a USB power adapter. The speakers are USB powered (5 Volts DC).
- Audio Connection: Connect the 3.5mm audio cable from the speakers to the 3.5mm audio output jack on your computer, TV, or laptop.
- Power On: Press and hold the power button located on the top of the right speaker to turn the speakers on.
- Volume Adjustment: Use the individual volume up (+) and volume down (-) buttons on the right speaker to adjust the audio level.
Image: A pair of Redragon GS520 speakers positioned on a desk next to a computer monitor and keyboard, illustrating a typical setup.
Image: A detailed view of the right speaker, highlighting the volume up, volume down, and power buttons for easy access and control.
Operating Instructions
Audio Playback
Once connected, the speakers will output audio from your connected device. Ensure your device's volume is also adjusted appropriately.
RGB Lighting Control
The GS520 speakers feature a touch-controlled RGB lighting bar with 6 selectable modes. To change the lighting mode or turn the lights off, gently tap the touch sensor located on the top of the right speaker.
Image: An illustrative diagram demonstrating the touch control area on top of the speaker for cycling through the 6 RGB lighting modes.
Volume Control
Individual buttons for volume up and volume down are provided on the right speaker for precise audio level adjustments.
Maintenance
To ensure the longevity and optimal performance of your speakers, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the speaker surfaces. Avoid using liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the speakers with care. Avoid dropping them or subjecting them to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| RGB lighting not working or stuck. |
|
|
| Distorted sound. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | Anvil (GS520) |
| Speaker Type | Multimedia, 2.0 Channel Stereo |
| Connectivity | USB (Power), 3.5mm Audio Cable |
| Input Voltage | 5 Volts (DC) |
| Speaker Maximum Output Power | 3 Watts |
| Frequency Response | 20 KHz |
| RGB Lighting Modes | 6 (Touch Controlled) |
| Material | Aluminum, Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 3.5"D x 4"W x 7"H |
| Item Weight | 1.8 Pounds |
| Cable Length (between speakers) | Up to 31 inches (80 cm) |
Warranty and Support
Redragon provides a limited warranty for the GS520 speakers. For detailed warranty information, product support, or technical assistance, please visit the official Redragon website or contact their customer service. Keep your purchase receipt for warranty claims.
For additional resources and product information, you may visit the Redragon Store on Amazon.