1. Important Safety Information
- Read all instructions before using this product.
- Ensure the power adapter's voltage (100V-240V) is compatible with your local power supply.
- This adapter is designed for indoor use only. Do not expose to rain or moisture.
- Do not use the adapter if the cord or plug is damaged.
- Keep out of reach of children.
- Disconnect from power outlet when not in use.
2. Package Contents
- 1 x GUY-TECH AC Power Adapter Charger for Hyper Tough AQ70008G
3. Setup Instructions
Follow these steps to properly connect your AC Power Adapter:
- Ensure the Hyper Tough AQ70008G 4.8-Volt Cordless Screwdriver is turned off.
- Locate the charging port on your Hyper Tough AQ70008G cordless screwdriver.
- Insert the barrel connector of the GUY-TECH AC Power Adapter into the charging port of the screwdriver. Ensure a secure connection.
- Plug the AC power adapter into a standard 100V-240V wall outlet.
- The LED indicator on the adapter will illuminate, indicating that power is being supplied.
Image 1: The GUY-TECH AC Power Adapter, showing the main unit and barrel connector.
Image 2: Visual representation highlighting the 7-foot cable length and the presence of an LED indicator on the adapter.
4. Operating Instructions
Once connected to the screwdriver and a power outlet, the adapter will begin to supply power. The integrated LED indicator provides visual confirmation that the adapter is receiving power and is operational. Refer to your Hyper Tough AQ70008G screwdriver's manual for specific charging times and battery status indications.
5. Maintenance
- Cleaning: Disconnect the adapter from the power source and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
- Inspection: Periodically inspect the adapter and cable for any signs of damage, such as cuts, fraying, or bent pins. If damage is found, discontinue use immediately.
6. Troubleshooting
- Adapter not supplying power (LED off):
- Check if the adapter is securely plugged into the wall outlet.
- Verify that the wall outlet is functional by testing it with another device.
- Ensure the barrel connector is fully inserted into the screwdriver's charging port.
- Screwdriver not charging:
- Confirm the adapter's LED indicator is lit. If not, refer to the above point.
- Ensure the screwdriver's charging port is clean and free of debris.
- Consult the Hyper Tough AQ70008G screwdriver's manual for specific charging requirements or battery issues.
7. Specifications
| Brand | GUY-TECH |
| Model | AQ70008G (Compatible) |
| Input Voltage | 100V - 240V (Worldwide) |
| Wattage | 60 watts |
| Connector Type | Barrel Connector |
| Cable Length | 7 Feet |
| Special Features | Over Voltage Output Protection, Over Current Output Protection, Short Circuit Output Protection, LED Indicator |
| Power Source | Corded Electric |
8. Warranty Information
This product comes with a 30 Days Refund warranty. Please retain your proof of purchase for any warranty claims. For details on how to initiate a refund or for further inquiries, please contact your retailer or the manufacturer directly.
9. Support
If you encounter any issues not covered in this manual or require further assistance, please contact the customer support of your retailer or the manufacturer. When contacting support, please have your product model (AQ70008G) and purchase information ready.
