Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your SHARP SDW6757ES Slide-In Dishwasher. Please read all instructions carefully before using the appliance and retain this manual for future reference.
The SHARP SDW6757ES is designed to offer a comprehensive dishwashing experience with features such as multiple wash cycles, specialized options, and an adjustable interior. Its stainless steel finish and hidden control panel contribute to a sleek aesthetic.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury to persons.
- Read all instructions before using the dishwasher.
- Use the dishwasher only for its intended function.
- Do not touch the heating element during or immediately after use.
- Do not operate the dishwasher if it has a damaged power cord or plug, or if it is not working properly.
- Keep children away from the dishwasher, especially when it is operating.
- Use only detergents and rinse agents recommended for dishwashers.
- Ensure proper grounding of the appliance.
Setup and Installation
Proper installation is crucial for the performance and longevity of your dishwasher. It is recommended that installation be performed by a qualified professional.
Unpacking
Carefully remove all packaging materials. Inspect the dishwasher for any shipping damage. Report any damage immediately to the retailer.
Location Requirements
The dishwasher should be installed in a standard 24-inch wide opening. Ensure adequate space for water supply, drain, and electrical connections.
Electrical Connection
This dishwasher requires a 120 Volt electrical supply. Note that a power cable is not included with the unit and must be purchased separately. Ensure the electrical connection meets local codes and the appliance is properly grounded.
Water Connections
The water inlet is located on the left side of the front of the appliance. The drain hose connection is also typically routed from the front. Ensure all connections are secure to prevent leaks.
Leveling
The dishwasher must be level for proper operation. Adjust the leveling feet as needed to ensure stability and prevent water retention.

Image: Side view of the SHARP SDW6757ES dishwasher, illustrating the insulation and internal structure for installation reference.
Operating Instructions
Familiarize yourself with the control panel and loading procedures for optimal cleaning results.
Control Panel
The SHARP SDW6757ES features a hidden touch panel control system, accessible when the door is slightly ajar. The panel includes buttons for various cycles and options, along with indicators for status.

Image: Close-up view of the hidden touch control panel, displaying cycle and option selections.
Loading the Dishwasher
Proper loading ensures effective cleaning. Avoid overcrowding and ensure spray arms can rotate freely.
- Lower Rack: Ideal for plates, large bowls, and pots.
- Upper Rack: Suitable for glasses, cups, and smaller bowls.
- Third Rack: Use the adjustable third rack for cutlery, serving utensils, and small, flat items. The premium smooth glide rails allow for easy access.

Image: Interior view of the dishwasher with all racks extended, demonstrating the loading configuration.

Image: A top-down perspective highlighting the third rack, designed for cutlery and small, flat items.
Wash Cycles
Select the appropriate cycle based on the soil level of your dishes.
- Auto: Automatically adjusts wash time and temperature based on soil sensors.
- Heavy Duty: For heavily soiled dishes and cookware.
- Normal: Standard cycle for everyday dishes.
- Delicate: For lightly soiled or fragile items.
- Express Wash: A shorter cycle for lightly soiled dishes that need quick cleaning.
- Power Wash Zone: Directs extra scrubbing power to a specific area for challenging cookware.
Wash Options
Enhance your wash cycle with these additional options:
- Heated Dry: Utilizes a heating element for faster and more efficient drying.
- Half Load: Reduces water and energy consumption for smaller loads.
- No Temp Wash: Washes without additional heating.
- Sanitize: Increases water temperature to sanitize dishes.
- Air Refresh: Circulates air to reduce odors.
- Delay: Postpones the start of a wash cycle.

Image: The interior of the dishwasher illuminated by premium white LED lighting, highlighting the upper spray arm for thorough cleaning.

Image: A view of the dishwasher's lower interior, detailing the filter assembly and the lower spray arm.
Maintenance
Regular maintenance helps ensure optimal performance and extends the life of your dishwasher.
Cleaning the Exterior
Wipe the stainless steel exterior with a soft, damp cloth and a mild detergent. Avoid abrasive cleaners or scouring pads that can scratch the surface.
Cleaning the Interior and Filters
Periodically clean the interior of the dishwasher, including the spray arms and the filter assembly. The soil sensors help optimize cycles, but regular manual cleaning of the filter prevents buildup and ensures efficient operation. Refer to the full user manual for detailed instructions on filter removal and cleaning.
Detergent and Rinse Aid
Always use high-quality dishwasher detergent and rinse aid. Check the rinse aid dispenser regularly and refill as needed to improve drying performance and prevent spots.
Troubleshooting
Before contacting service, review these common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishes not clean | Improper loading, clogged spray arms, insufficient detergent, clogged filter. | Ensure proper loading, clean spray arm nozzles, use correct amount of detergent, clean filter. |
| Dishes not drying | No rinse aid, heated dry option not selected, improper loading. | Refill rinse aid dispenser, select 'Heated Dry' option, ensure dishes are loaded to allow air circulation. |
| Dishwasher not starting | Door not fully closed, power supply issue, cycle not selected. | Ensure door is latched, check circuit breaker, select a wash cycle and press start. |
| "1H" flashing on display | Indicates a 1-hour delay is active. | This is a delay setting. To cancel, refer to the full user manual for specific instructions on resetting or canceling cycles. |
| Unusual noises | Items interfering with spray arms, foreign object in pump, leveling issues. | Rearrange dishes, inspect filter and pump area for obstructions, ensure dishwasher is level. |
For more detailed troubleshooting or issues not listed here, please consult the full user manual or contact Sharp customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SDW6757ES |
| Finish Type | Stainless Steel |
| Form Factor | Built-In |
| Item Weight | 93.3 Pounds |
| Voltage | 120 Volts |
| Cycle Options | Heated Dry, Normal, Rapid (6 total option cycles) |
| Style | Touch Panel |
| Display Type | LED |
| Water Consumption | 3.5 Gallons |
| Inner Material | Stainless Steel |
| UPC | 074000620834 |
| Product Dimensions | 26.5"D x 23.8"W x 33.8"H |
| Annual Energy Consumption | 249 Kilowatt Hours Per Year |
| Special Features | Adjustable Rack, Delay, Touch Panel |
| Certification | Energy Star, NSF |
| Capacity | 14 Place Settings |
| Noise Level | 45 dB |
| Included Components | Dishwasher |
Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharp website. Sharp provides customer support for product inquiries, technical assistance, and service scheduling.
You can also download the official user manual for comprehensive information: