1. Introduction
This manual provides essential information for the proper installation, adjustment, and maintenance of your maXpeedingrods Coilovers. Please read these instructions thoroughly before attempting any installation or adjustment. Incorrect installation or adjustment can lead to vehicle damage, poor performance, or safety hazards.
2. Product Features and Components
The maXpeedingrods Coilover Suspension Kit is engineered for enhanced vehicle performance and adjustability. Key features include:
- Height Adjustment: Allows for a 1-3 inch lowering range, enabling a customized vehicle stance. Note: This kit does not maintain original ride height.
- Twin-tube Structure: Designed for a longer stroke and higher height adjustability, providing a more comfortable ride by reducing pressure on joints compared to mono-tube designs.
- High-Quality Materials: Constructed from 6061 aluminum alloy with T6 treatment for increased hardness, high strength, and durability. Precision parts ensure safe and reliable installation.
- Optimized Spring Rate: Front: 10kg/mm (556 lbs/in) & Rear: 7 kg/mm (392 in/lbs). Springs undergo over 600,000 continuous tests with less than 0.04% distortion, featuring special surface treatment for improved durability and performance.
- Pillowball Top Mount: Improves steering feel and response, and helps eliminate turning noise.
- Heavy Duty Steel Lower Mounts: Ensures secure and robust attachment to the vehicle.








3. Application and Compatibility
This coilover kit is designed for the following vehicle models:
- Mitsubishi 3000GT 1991-1999 3000 4WD (AWD/VR-4) Coupe Z16A V6 turbo
- Dodge Stealth 1991-1996 4WD (AWD)
Ensure your vehicle matches these specifications before installation.
4. Setup and Installation
Safety First: Always prioritize safety. Wear appropriate personal protective equipment (PPE) including safety glasses and gloves. Ensure the vehicle is securely supported on jack stands on a level surface before beginning work. Never work under a vehicle supported only by a jack.
Professional Installation Recommended: Due to the complexity and critical safety aspects of suspension components, professional installation by a qualified mechanic is highly recommended. Incorrect installation can lead to serious injury or vehicle damage.
General Installation Steps (Consult a professional or detailed service manual for specific vehicle procedures):
- Preparation: Gather all necessary tools. Refer to your vehicle's service manual for specific torque specifications and procedures.
- Vehicle Lift and Wheel Removal: Safely lift the vehicle and remove the wheels.
- Remove OEM Suspension: Disconnect and remove the original shock absorbers and springs.
- Install New Coilovers: Carefully install the maXpeedingrods coilovers. Ensure all bolts are tightened to the manufacturer's specified torque.
- Initial Adjustments: Perform initial ride height adjustments as desired (refer to Section 5).
- Reassembly: Reinstall wheels and lower the vehicle safely.
- Alignment: After installation, a professional wheel alignment is mandatory to ensure proper handling and tire wear.
5. Operating and Adjustment
These coilovers feature adjustable ride height and preset damping. Damping is not user-adjustable for this specific model.
Ride Height Adjustment:
- Loosen Locking Collars: Using the provided adjustment wrenches, loosen the lower locking collar on the coilover body.
- Adjust Lower Mount: Rotate the lower mount to raise or lower the vehicle. Turning clockwise will lower the vehicle, and counter-clockwise will raise it.
- Maintain Evenness: Adjust all four coilovers evenly to maintain proper vehicle balance. Measure from the center of the wheel hub to the fender lip to ensure consistent height.
- Tighten Locking Collars: Once the desired height is achieved, securely tighten the locking collars to prevent movement.
- Spring Preload: Ensure the spring has a slight preload (snug fit) but is not overly compressed. Excessive preload can reduce ride comfort and suspension travel.
After any height adjustment, it is crucial to have a professional wheel alignment performed.
6. Maintenance
Regular maintenance helps ensure the longevity and performance of your coilovers:
- Regular Inspection: Periodically inspect coilovers for any signs of damage, leaks, loose bolts, or corrosion.
- Cleaning: Keep the coilover bodies and springs clean from dirt, salt, and debris, especially after driving in harsh conditions. Use mild soap and water.
- Lubrication: Apply a thin layer of appropriate grease to the threads of the adjustment collars to prevent seizing and ensure smooth adjustments.
- Dust Boots: Check the condition of the dust boots. Replace them if they are torn or damaged to protect the damper seals.
7. Troubleshooting
If you experience issues with your coilovers, consider the following:
- Unusual Noises (Clunking/Squeaking): Check for loose mounting bolts, worn bushings, or improper spring preload. Ensure pillowball top mounts are properly seated and lubricated if necessary.
- Uneven Ride Height: Re-measure and adjust all coilovers to ensure they are set to the same height. Verify that locking collars are securely tightened.
- Poor Handling/Ride Quality: Confirm that installation was correct and all components are properly torqued. A professional alignment is crucial after any suspension work.
- Oil Leaks: A small amount of oil residue can be normal. However, significant oil leaks indicate a damaged seal and require professional inspection and potential replacement.
For persistent issues, consult a qualified automotive technician.
8. Specifications
| Specification | Detail |
|---|---|
| Brand | maXpeedingrods |
| Model Number | DR45@CO-MIT300-9199-G-NA |
| Application | Mitsubishi 3000GT AWD (1991-1999), Dodge Stealth AWD (1991-1996) |
| Auto Part Position | Front |
| Style | Adjustable (Height) |
| Vehicle Service Type | Car |
| Exterior Finish | Painted |
| Item Weight | 26100 Grams |
| Included Components | Comes with housing |
| Material Type | Aluminum (6061-T6) |
| Extended Length | 665 Millimeters |
| Front Spring Rate | 10kg/mm (556 lbs/in) |
| Rear Spring Rate | 7 kg/mm (392 in/lbs) |
9. Official Product Video
Official video showcasing the manufacturing process and key features of maXpeedingrods Advanced T7 Series Coilovers, including material quality, damper technology, and spring rate settings.
10. Warranty and Support
For warranty information, please refer to the documentation included with your product or contact maXpeedingrods directly. The manufacturer's warranty typically covers defects in materials and workmanship for a specified period.
For technical support, parts, or service inquiries, please contact maXpeedingrods customer service through their official website or the seller from whom the product was purchased.