SKROSS Pro Light USB (4xA) Universal Travel Adapter User Manual

Product Overview

The SKROSS Pro Light USB (4xA) is a compact and versatile universal travel adapter designed to provide power and charging capabilities for your electronic devices in over 100 destinations worldwide. It features a 3-pin design suitable for both 2-pin and 3-pin devices, along with four integrated USB ports for charging multiple USB-powered devices simultaneously.

This adapter is engineered for safety, incorporating anti-shock and kid-safe features. It supports a wide input voltage range and can handle high-power devices such as laptops and travel hair dryers, up to 1750W.

Image: Front view of the SKROSS Pro Light USB (4xA) Universal Travel Adapter, highlighting its four USB charging ports and the universal AC socket.

Setup and Initial Use

Before connecting any device, ensure the adapter's pins are correctly configured for the wall socket in your destination. The SKROSS Pro Light USB (4xA) features retractable pins for various regions.

Selecting the Correct Plug Type:

• USA/Japan (Type B): Slide the lever marked "USA" to extend the two flat parallel pins and the round grounding pin.
• UK/Hong Kong (Type G): Slide the lever marked "UK" to extend the three rectangular pins.
• Australia/China (Type I): Slide the lever marked "AUS" to extend the two flat angled pins and the flat grounding pin.
• Europe (Schuko & 2-pole Euro): The adapter accepts European plugs (Type F Schuko and Type C Euro) into its input socket. The output pins are selected based on the destination.

To retract the pins, simply push them back into the adapter until they click into place. Always ensure the pins are fully extended or retracted before inserting or removing the adapter from a wall socket.

Image: Side view of the adapter demonstrating the retractable pins for USA, UK, and Australia/China, clearly labeled for ease of use.

Operating Instructions

Connecting Devices:

1. For AC Powered Devices:
   • Ensure the adapter's output pins are correctly set for the wall socket.
   • Plug the adapter into the wall socket.
   • Insert your device's plug (2-pin or 3-pin, typically European Schuko or Euro) into the universal input socket on the adapter.
   • Verify that your device's power requirements (voltage and wattage) are within the adapter's limits (100V-700W / 250V-1750W).
2. For USB Powered Devices:
   • Plug the adapter into the wall socket.
   • Connect your USB charging cables to any of the four USB ports on the adapter.
   • Connect the other end of the USB cables to your devices (e.g., smartphones, tablets, smartwatches).
   • The four USB ports share a maximum output of 4.8A (5V).

The adapter is designed to safely connect devices with a maximum load of 7A. It is suitable for a wide range of electronics, including laptops and travel hair dryers, provided their power consumption does not exceed 1750W at 250V or 700W at 100V.

Image: The adapter in active use, demonstrating its ability to power a laptop and simultaneously charge multiple USB devices like a smartphone, tablet, and smartwatch.

Maintenance

To ensure the longevity and safe operation of your SKROSS Pro Light USB (4xA) adapter, follow these simple maintenance guidelines:

• Cleaning: Disconnect the adapter from the power outlet and all devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use.
• Handling: Avoid dropping the adapter or subjecting it to strong impacts, as this can damage internal components.
• Fuse Replacement: The adapter contains a replaceable fuse (T 7A). If the adapter stops working, it may indicate a blown fuse. Consult a qualified technician for fuse replacement or refer to the detailed instructions provided with the product packaging for specific fuse access and replacement procedures. Ensure to use a fuse of the correct rating (T 7A).

Troubleshooting

If you encounter issues with your SKROSS Pro Light USB (4xA) adapter, please refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact SKROSS customer support.

Specifications

Image: Back of the product packaging illustrating the wide range of countries and plug types compatible with the adapter.

Warranty and Support

Warranty Information:

The SKROSS Pro Light USB (4xA) Universal Travel Adapter comes with a global warranty. For specific terms and conditions of the warranty, please refer to the documentation included with your product or visit the official SKROSS website.

Customer Support:

For further assistance, technical support, or inquiries regarding your SKROSS product, please visit the official SKROSS website or contact their customer service department. You can find more information about country compatibility and product details on the SKROSS website:

Visit SKROSS Official Website