1. Introduction
The Godox SA-17 Projector Kit Adapter is designed to expand the creative capabilities of your Godox Bowens Mount LED Continuous Lights. This adapter allows for the use of various light shaping accessories, including lenses, gobos, iris diaphragms, framing shutters, and color gels, to precisely control and project light patterns and effects.
Figure 1: Godox SA-17 Projector Kit Adapter.
2. What's Included
The SA-17 adapter typically includes the main adapter unit. Additional accessories such as projection lenses, gobos, iris diaphragms, framing shutters, and color filters are often sold separately or as part of specific kits. Please refer to your product packaging for the exact contents.
Figure 2: Godox SA-17 Adapter with various projection accessories (accessories may be sold separately).
Figure 3: Illustration of inserting a projection attachment into the SA-17 adapter.
2.1. Official Product Video: Package Content & Instructions for Use
Video 1: This video demonstrates the package contents and basic instructions for using a projection attachment with a Bowens mount light, similar to the SA-17 setup.
3. Compatibility
The Godox SA-17 Adapter is designed for use with Godox Bowens Mount LED Continuous Lights. It is compatible with a wide range of models, allowing these lights to integrate with the Godox SA-P Projection Attachment system.
3.1. Compatible Godox LED Continuous Lights:
- Godox SL60W, SL60IID, SL60IIBi
- Godox SL100D, SL100Bi, SL150III, SL200III
- Godox VL150II, VL300II, UL150II
- Godox ML30, ML60
- Godox VL150, VL200, VL300
- Godox LA150, LA200, LA300
- Godox SZ150R
- Godox S30 (with SA-P gears)
Figure 4: SA-17 adapter shown mounted on a Godox SL150 LED light.
Figure 5: SA-17 adapter shown mounted on a Godox VL300 LED light.
Figure 6: The SA-17 adapter can also be used with Godox S30 lights and SA-P accessories.
4. Setup and Installation
4.1. Attaching the SA-17 Adapter to a Bowens Mount Light
- Ensure your Godox LED Continuous Light is powered off and cooled down.
- Align the Bowens mount of the SA-17 adapter with the Bowens mount on your LED light.
- Insert the adapter and rotate it clockwise until it clicks securely into place.
- To remove, press the release button on the LED light's Bowens mount and rotate the adapter counter-clockwise.
Figure 7: SA-17 adapter attached to a Godox SL200II light with a projection attachment.
4.2. Installing SA-P Projection Attachments and Accessories
The SA-17 adapter is designed to hold various SA-P accessories (sold separately) to create specific lighting effects.
- Projection Lens: Insert the desired projection lens into the front of the SA-17 adapter. Secure it by tightening the locking mechanism.
- Gobos (Go-Between-Opticals): Gobos are metal discs with cut-out patterns. Insert a gobo into the designated slot within the projection attachment.
- Iris Diaphragm (SA-06): Used to adjust the size of the projected light circle. Insert the iris into its slot and use the lever to control the aperture.
- Framing Shutter (SA-07): Features four adjustable blades to shape the light beam into various geometric forms (e.g., trapezoids, rectangles, triangles).
- Scrim Set (SA-05): Used to reduce light intensity or soften the beam gradation.
- Color Gels (SA-11C/SA-11T): Insert color gels into the filter slot to change the color of the projected light for creative effects or color correction.
Figure 8: The SA-06 Iris Diaphragm for precise light shaping.
Figure 9: The SA-05 Scrim Set for light intensity and gradation control.
Figure 10: The SA-07 Framing Shutter and SA-11C/SA-11T Color Gels.
Figure 11: Examples of patterns from the SA-09 Gobo Set.
5. Operating Instructions
5.1. Adjusting Light Patterns and Focus
- Once the SA-17 adapter and desired projection attachment are installed, power on your Godox LED Continuous Light.
- Direct the light towards a background or subject.
- Adjust the focus ring on the projection lens to achieve a sharp or soft edge for your projected pattern.
- If using a gobo, iris, or framing shutter, manipulate these accessories to achieve the desired shape, size, and effect of the light pattern.
5.2. Official Product Video: How to make a cool background for your video?
Video 2: This video demonstrates how to use gobos and color filters with a light source to create various background effects, showcasing the creative potential of the SA-17 adapter.
6. Maintenance
- Keep the SA-17 adapter and all accessories clean and free from dust. Use a soft, dry cloth for cleaning.
- For lenses and optical elements, use a lens cleaning solution and a microfiber cloth to avoid scratches.
- Store the adapter and accessories in a protective case when not in use to prevent damage.
- Avoid exposing the unit to extreme temperatures or high humidity.
7. Troubleshooting
7.1. Light Pattern is Not Sharp
- Ensure the projection lens is correctly installed and securely tightened.
- Rotate the focus ring on the projection lens to adjust the sharpness of the pattern.
- Check the distance between the light and the projection surface; optimal focus may vary with distance.
7.2. Adapter Not Attaching Securely
- Verify that the Bowens mount on your LED light is clean and free from obstructions.
- Ensure the SA-17 adapter's Bowens mount is properly aligned before rotating clockwise.
- Confirm compatibility with your specific Godox LED light model.
8. Specifications
| Model | SA-17 |
| Product Dimensions | 6.97 x 6.18 x 6.18 inches |
| Item Weight | 1.06 pounds |
| Mount Type | Bowens Mount |
| Manufacturer | Godox |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Godox website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.
Official Godox Store: Visit the GODOX Store on Amazon
