YA-MAN RF Facial Device Bright Lift White HRF40S User Manual

1. Product Overview

The YA-MAN RF Facial Device Bright Lift White HRF40S is designed to enhance skin clarity and address common skin concerns. This device integrates Radio Frequency (RF), Electrical Muscle Stimulation (EMS), and LED light therapy to provide comprehensive skincare.

It operates through a three-step process: Polish, Replenish, and Seal, targeting various aspects of skin health.

Image: YA-MAN RF Facial Device Bright Lift White HRF40S. This image shows the device from the front, highlighting its sleek design and the blue LED light on the treatment head.

Key Features:

• RF (Radio Frequency) Technology: Warms the skin to support effective skincare.
• Ion Cleansing & Introduction: Utilizes ion power to remove impurities and enhance the penetration of skincare ingredients.
• EMS (Electrical Muscle Stimulation): Stimulates facial muscles for a toning effect.
• Blue LED Light: Supports skin tightening and overall skin health.
• Melano Barrier Pulse: A new waveform in MOIST mode, designed to work with whitening cosmetics.
• Cool-down Function: Helps to soothe and tighten the skin after treatment.

2. Safety Precautions

Please read all safety instructions carefully before using the device to prevent injury or damage.

Do Not Use If You Are:

• Using medical electrical equipment (e.g., implantable pacemakers, life support systems like artificial heart-lung machines, or wearable electrocardiographs).
• Suffering from heart disease, disability, or have a suspected condition.
• Unable to express your intentions or sensations (e.g., temperature or stimulation).
• Diagnosed with autoimmune diseases.

Consult a Doctor Before Use If You Are:

• Suffering from acute diseases or infectious diseases.
• Diagnosed with malignant tumors or febrile diseases.
• Experiencing high blood pressure or blood disorders.
• Having a fever.
• Experiencing sensory impairment due to severe peripheral circulatory dysfunction (e.g., diabetes).
• Diagnosed with neurological disorders.
• Suffering from skin diseases or atopic dermatitis.
• Currently undergoing medical treatment or taking medication.
• Prone to allergies, contact dermatitis, or have pre-existing skin conditions, or concerns about skin reactions during use.

Do Not Use On The Following Areas:

• Fractured areas.
• Areas where metal has been implanted in the body due to surgical procedures (e.g., plastic surgery, orthopedic surgery, cosmetic surgery).
• Areas with internal bleeding, swelling, or scabs after cosmetic medical procedures.

Note: For areas that have undergone cosmetic medical procedures (e.g., hyaluronic acid injection, silicone injection, Botox, thread lift, double eyelid surgery, HIFU), refrain from using the device for 2 weeks after the procedure. Consult your doctor, and if there are no issues, you may then use the device.

If you feel unwell or notice any skin abnormalities during use, immediately stop using the device. If the condition does not improve, consult a doctor.

3. Setup

Unpacking and Initial Charge:

1. Carefully remove the device and all accessories from the packaging.
2. Place the device on the charging stand.
3. Connect the USB charging cable to the charging stand and then to the AC adapter.
4. Plug the AC adapter into a power outlet.
5. Charge the device for approximately 3 hours before first use. The indicator lights will show charging status.

Image: The YA-MAN RF Facial Device Bright Lift White HRF40S on its charging stand, ready for charging.

Attaching the Cotton Stopper (for CLEAN mode):

For the CLEAN mode, it is recommended to use a cotton pad. Attach the cotton stopper to secure a cotton pad onto the treatment head.

4. Operating Instructions

The device features three main modes: CLEAN (Polish), MOIST (Replenish), and COOL (Seal).

General Usage Steps:

1. Ensure your face is clean and free of makeup.
2. Apply appropriate skincare products as instructed for each mode.
3. Select the desired mode and intensity level.
4. Gently glide the device over your skin as directed.
5. After use, clean the device as per maintenance instructions.

Image: The three-step skincare process: Polish, Replenish, and Seal, illustrated with the device.

Mode Details:

Step 1: CLEAN (Polish)

This mode uses ion power to remove impurities and old keratin from pores after washing your face, enhancing skin clarity and preparing it for subsequent skincare.

• Attach a cotton pad with the cotton stopper.
• Apply a suitable toner or cleansing lotion to the cotton pad.
• Select CLEAN mode and desired intensity.
• Gently glide the device over your face.

Image: Illustration of Ion Cleansing and Ion Introduction. The left panel shows positive ions attracting dirt, while the right panel shows negative ions aiding ingredient penetration.

Step 2: MOIST (Replenish)

This mode utilizes RF and the new Melano Barrier Pulse to help skincare ingredients penetrate the skin, promoting a brighter complexion. It is recommended for use with whitening cosmetics containing ingredients like Vitamin C derivatives or tranexamic acid.

• Apply your preferred serum or moisturizing cream to your face.
• Select MOIST mode and desired intensity.
• Gently glide the device over your face, allowing the RF warmth and pulse to work.

Image: Diagram illustrating RF (Radio Frequency) technology. It shows RF waves penetrating the skin layers, generating warmth.

Image: Explanation of EMS (Electrical Muscle Stimulation). A facial diagram indicates various muscle groups, demonstrating how the device targets them.

Step 3: COOL (Seal)

The final step uses a cool-down function and blue LED light to help tighten and soothe the skin.

• After completing the MOIST mode, select COOL mode.
• Gently glide the cool head over your face.
• When using around the eyes, close your eyes and keep the electrode head at least 5cm away from the skin.

Image: Blue LED light function and usage around the eyes. The image shows the device emitting blue light and a diagram indicating a minimum 5cm distance from the eye area during use.

5. Maintenance

Cleaning the Device:

1. After each use, ensure the device is turned off and disconnected from the power source.
2. Wipe the electrode head and body of the device with a soft, damp cloth.
3. Do not use abrasive cleaners, alcohol, or harsh chemicals, as these may damage the device.
4. Ensure the device is completely dry before storing or recharging.

Storage:

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official YA-MAN website. Keep your proof of purchase for warranty claims.

Manufacturer Reference: 002-0011_22220