Briloner 3448-014

BRILONER LED Ceiling Light Model 3448-014 Instruction Manual

Model: 3448-014 | Brand: Briloner

Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BRILONER LED Ceiling Light, Model 3448-014. Please read these instructions carefully before installation and retain them for future reference.

The BRILONER LED Ceiling Light is a modern fixture featuring a metal-plastic and wood design, finished in black with a wooden base. It is designed for indoor use and provides warm white light suitable for various rooms.

Safety Information

WARNING: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.

  • Ensure the power supply is switched off before commencing any work.
  • This product is designed for indoor use only (IP20 protection class). Do not expose to moisture or direct water.
  • Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
  • Keep packaging materials out of reach of children.
  • Refer to the official safety document for more details: Safety Information (PDF).

Package Contents

Verify that all components are present and undamaged before installation.

  • 1x BRILONER LED Ceiling Light (Model 3448-014)
  • Mounting hardware (screws, wall plugs) - (Typically included, but check packaging)
  • Instruction Manual - (This document)

Setup and Installation

Follow these steps for proper installation. If you are unsure about any step, consult a qualified electrician.

  1. Prepare for Installation:
    • Turn off the main power supply to the installation area at the circuit breaker.
    • Ensure the area is dry and free from obstructions.
  2. Mark Mounting Points:
    • Hold the light fixture's mounting bracket against the ceiling at the desired location.
    • Mark the positions for drilling holes using a pencil.
  3. Drill Holes and Insert Wall Plugs:
    • Drill holes at the marked positions suitable for the provided wall plugs.
    • Insert the wall plugs flush with the ceiling surface.
  4. Attach Mounting Bracket:
    • Secure the mounting bracket to the ceiling using the screws.
  5. Wiring:
    • Connect the household electrical wires to the light fixture's terminals according to local electrical codes. Typically, this involves connecting live (L), neutral (N), and ground (E) wires.
    • Ensure all connections are secure and properly insulated.
  6. Mount the Fixture:
    • Carefully attach the light fixture body to the mounting bracket, ensuring it is securely fastened.
  7. Restore Power:
    • Once installation is complete and all connections are secure, restore power at the main circuit breaker.
    • Test the light fixture.
Diagram showing the dimensions of the BRILONER LED Ceiling Light, Model 3448-014.

Image: Dimensional drawing of the BRILONER LED Ceiling Light. The fixture measures 560mm in length, 120mm in width, and 37mm in height.

Operating Instructions

This LED ceiling light is designed for simple operation.

  • Turning On/Off: Use a standard wall switch connected to the light fixture's power supply to turn the light on or off.
  • The integrated LED modules provide a warm white light at 3000 Kelvin. This fixture does not support dimming unless connected to a compatible external dimmer switch (not included and must be installed by a qualified electrician).
BRILONER LED Ceiling Light illuminated, showing warm white light.

Image: The BRILONER LED Ceiling Light emitting warm white light (3000K).

Maintenance

The BRILONER LED Ceiling Light requires minimal maintenance.

  • Cleaning:
    • Before cleaning, ensure the power supply to the fixture is disconnected.
    • Wipe the fixture with a soft, dry, or slightly damp cloth.
    • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
  • LED Modules: The LED modules are integrated and not user-replaceable. They have an average lifespan of approximately 20,000 hours.

Troubleshooting

If you encounter issues with your BRILONER LED Ceiling Light, refer to the following common problems and solutions:

Problem Possible Cause Solution
Light does not turn on.
  • No power supply.
  • Loose wiring connection.
  • Faulty wall switch.
  • Check the circuit breaker and wall switch.
  • Ensure all wiring connections are secure (power off before checking).
  • Test the wall switch with another device or replace it if faulty.
Light flickers or dims unexpectedly.
  • Unstable power supply.
  • Loose wiring.
  • Incompatible dimmer switch (if installed).
  • Check household electrical system.
  • Verify wiring connections (power off before checking).
  • Ensure any dimmer switch is compatible with LED fixtures.
Light is not as bright as expected.
  • Dust accumulation on the light surface.
  • Incorrect expectation of lumen output.
  • Clean the light fixture (power off before cleaning).
  • Refer to specifications for expected lumen output (960 lumens total).

If the problem persists after attempting these solutions, contact customer support or a qualified electrician.

Specifications

Model Number 3448-014
Brand Briloner
Dimensions (L x W x H) 560 x 120 x 37 mm (56L x 12l x 3.7H centimeters)
Material Metal, Wood
Color Wood Black
Power Consumption 12 Watts (6 Watts per LED rod)
Luminous Flux 960 Lumens (480 Lumens per LED rod)
Color Temperature 3000 Kelvin (Warm White)
Light Source Type Integrated LED
Average Lifespan Approx. 20,000 hours
Protection Class IP20 (Indoor use only)
Voltage 12 Volts (DC) - (Internal LED voltage, fixture connects to AC mains)
Power Source AC/DC (Mains powered with internal driver)
Recommended Use Living room, bedroom, kitchen, hallway

Warranty and Support

BRILONER products are manufactured with quality and durability in mind. While specific warranty details are not provided in this document, please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact Briloner customer service through their official website or your retailer.

You can visit the Briloner store for more information: Briloner Store.

Additional Product Images

BRILONER LED Ceiling Light installed in a modern hallway, providing bright illumination.
Image: The BRILONER LED Ceiling Light installed in a hallway, showcasing its modern design and effective lighting.
Close-up view of the BRILONER LED Ceiling Light's wooden base and black LED bars.
Image: A detailed view of the light fixture, highlighting the combination of wood and black metal elements.
BRILONER LED Ceiling Light installed in a room, demonstrating its aesthetic appeal.
Image: The ceiling light integrated into a room setting, illustrating its modern and functional design.

Official Product Videos

No official product videos from the seller are available for this item in the provided data.

© 2024 Briloner. All rights reserved. | This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.