Introduction
The Sense 40' Sensor Extension Cable is designed to provide additional length for connecting current sensors or Flex add-on sensors to your Sense Energy Monitor. This cable facilitates installation in environments where the Sense monitor and electrical panel components are not in close proximity, ensuring accurate energy monitoring across various home electrical configurations.
Product Overview
The Sense 40' Sensor Extension Cable is a grey, round copper cable with male-to-female connectors. It is specifically engineered to maintain signal fidelity over extended distances, allowing for flexible placement of your Sense Energy Monitor's current sensors.
Image: The Sense 40-foot Sensor Extension Cable, coiled, showing its grey color and connectors.
Image: The Sense Energy Monitor, an orange rectangular device with a white antenna, to which the extension cable connects.
Setup and Installation
This extension cable is used to lengthen the connection between your Sense Energy Monitor and its current sensors (either included sensors or Flex add-on sensors). It is particularly useful in installations involving 400A split service panels or solar systems where components may be physically separated.
Connection Steps:
- Ensure all power to the electrical panel is safely turned off before beginning installation.
- Locate the existing sensor cable connected to your Sense monitor or the sensor itself.
- Connect the male end of the 40' extension cable to the female connector of the sensor cable or sensor.
- Connect the female end of the 40' extension cable to the appropriate port on the Sense Energy Monitor.
- Route the cable carefully, avoiding sharp bends or areas where it could be pinched or damaged.
- Verify all connections are secure before restoring power to the electrical panel.
Up to 80 feet of extension cable can be used in total without experiencing a loss of signal fidelity, allowing for flexible sensor placement.
Image: A smartphone screen displaying the Sense app's sensor setup interface, showing options for monitoring solar, 400A split service, or dedicated circuits.
Operating Instructions
The Sense 40' Sensor Extension Cable is a passive component designed to extend the physical reach of your Sense Energy Monitor's sensors. Once properly installed, it requires no direct operation. The Sense monitor will automatically detect and utilize the extended sensor connection to gather energy data.
Image: A smartphone screen displaying the Sense app's energy usage graph, illustrating how the monitor visualizes energy consumption data.
Maintenance
The Sense 40' Sensor Extension Cable requires minimal maintenance. Keep the cable free from physical damage, such as cuts, abrasions, or severe kinks. Ensure connectors remain clean and dry. Avoid exposing the cable to extreme temperatures or harsh chemicals. Periodically inspect the cable and its connections for any signs of wear or damage.
Troubleshooting
Issue: Sense Monitor not detecting sensors or showing inaccurate data.
- Check Connections: Ensure both ends of the extension cable are securely connected to the sensor and the Sense monitor.
- Inspect Cable: Look for any visible damage to the cable, such as cuts, pinches, or frayed wiring. A damaged cable may need replacement.
- Power Cycle: Turn off power to the electrical panel, disconnect and reconnect the cable, then restore power.
- Verify Sensor Placement: Ensure the current sensors are correctly clamped around the appropriate electrical wires as per your Sense monitor's installation guide.
- Total Cable Length: Confirm that the total length of all connected extension cables does not exceed 80 feet, as exceeding this limit may lead to signal degradation.
Specifications
| Manufacturer | Sense |
| Part Number | AEP6-ASSY |
| Item Model Number | AEP6-ASSY |
| Product Dimensions | 480 x 1 x 1 inches (40 feet length) |
| Item Weight | 1.46 pounds |
| Color | Grey |
| Material | Copper |
| Shape | Round |
| Voltage Rating | 240 Volts (AC) |
| Connector Gender | Male-to-Female |
| Included Components | 40’ sensor extension cable |
Warranty Information
This Sense 40' Sensor Extension Cable is covered by a 2-Year Manufacturer Warranty. For specific terms and conditions, please refer to the warranty documentation included with your Sense Energy Monitor or visit the official Sense support website.
Customer Support
For further assistance, technical support, or inquiries regarding your Sense 40' Sensor Extension Cable or Sense Energy Monitor, please visit the official Sense support website or contact their customer service department. Always refer to the primary Sense Energy Monitor manual for comprehensive installation and usage guidelines.
