OneTouch Verio Reflect Blood Glucose Meter

1. Introduction

The OneTouch Verio Reflect Blood Glucose Meter is designed to help individuals manage their diabetes by providing accurate and timely blood glucose readings. This system includes the meter, a lancing device, and sterile lancets, offering a comprehensive solution for personal blood glucose monitoring. It features advanced tools like ColorSure Technology and Blood Sugar Mentor messages to provide personalized guidance and insights.

2. Safety Information

Always consult your healthcare professional for treatment decisions based on your numeric blood glucose reading and their recommendation. This device is for in vitro diagnostic use only. Do not use for the diagnosis of or screening for diabetes. Keep out of reach of children. Store all components in a cool, dry place. Dispose of used lancets and test strips properly in a sharps container.

3. Package Contents

Your OneTouch Verio Reflect Blood Glucose Monitoring System package typically includes the following items:

• OneTouch Verio Reflect Blood Glucose Meter
• OneTouch Delica Plus Lancing Device
• 10 OneTouch Delica Plus Sterile Lancets
• Carrying Case
• Owner's Manual and Quick Start Guide

4. Setup

4.1. Meter Preparation

The meter comes with batteries included. Ensure they are properly installed. Follow the on-screen prompts to set the date, time, and measurement units (mg/dL or mmol/L) if not already configured. Refer to the Quick Start Guide for initial setup steps.

4.2. Lancing Device Setup

The OneTouch Delica Plus Lancing Device is designed for comfortable blood sampling. To prepare the lancing device:

1. Remove the cap from the lancing device.
2. Insert a new sterile lancet firmly into the lancet holder.
3. Twist off the protective cap from the lancet and save it for safe disposal.
4. Replace the lancing device cap.
5. Adjust the depth setting to a comfortable level (start with a lower setting and increase if needed).
6. Pull back the sliding barrel until it clicks, indicating it is ready to use.

5. Operating Instructions

5.1. Performing a Blood Glucose Test

To obtain an accurate blood glucose reading, follow these steps:

1. Wash your hands thoroughly with soap and warm water, then dry them completely.
2. Insert a OneTouch Verio test strip into the meter. The meter will turn on automatically.
3. Use the lancing device to get a blood sample from the side of your fingertip.
4. Apply the blood sample to the narrow channel on either side of the test strip. The blood will be drawn into the strip.
5. Wait for the result to appear on the meter's display (approximately 5 seconds).

5.2. ColorSure Technology

The OneTouch Verio Reflect meter features ColorSure Dynamic Range Indicator technology, which instantly shows if your blood glucose reading is within, near low, near high, low, or high. This visual feedback helps you understand your results at a glance.

5.3. Blood Sugar Mentor Messages

The meter provides personalized Blood Sugar Mentor messages that offer guidance, insight, and encouragement based on your readings. These messages can help you understand patterns and take action to manage highs and lows effectively.

5.4. OneTouch Reveal App Connectivity

The OneTouch Verio Reflect meter can wirelessly connect to the OneTouch Reveal mobile app via Bluetooth. This app provides additional insights, trend tracking, and allows you to share data with your healthcare team. Download the app from the App Store or Google Play.

5.5. Product Video Guide

For a visual demonstration of the OneTouch Verio Reflect Blood Glucose Meter's features and usage, please watch the official product video below:

6. Maintenance

6.1. Cleaning and Care

Clean the meter and lancing device regularly with a soft, damp cloth. Do not immerse the meter in water or use harsh cleaning agents. Refer to the full owner's manual for detailed cleaning and disinfection procedures.

6.2. Storage

Store the meter, test strips, and lancets in their original containers in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store in a refrigerator. Ensure the test strip vial cap is tightly closed after each use.

6.3. Battery Replacement

The OneTouch Verio Reflect meter uses two CR2032 lithium metal batteries. When the low battery indicator appears, replace both batteries simultaneously. Ensure proper polarity when inserting new batteries.

7. Troubleshooting

If you encounter issues with your OneTouch Verio Reflect meter, consider the following common solutions:

• Error Messages: If an error code appears, refer to the owner's manual for specific meanings and corrective actions. Common errors may relate to insufficient blood sample, expired test strips, or temperature issues.
• Inconsistent Readings: Ensure proper technique, check test strip expiration dates, and verify that the meter and strips are stored correctly. Calibration with control solution may be necessary if you suspect accuracy issues.
• Connectivity Issues: If the meter is not connecting to the OneTouch Reveal app, ensure Bluetooth is enabled on both devices and that the app is updated to the latest version. Try restarting both the meter and your mobile device.
• No Display: Check battery installation and replace batteries if necessary.

If problems persist, contact OneTouch Customer Service for further assistance.

8. Specifications

9. Warranty and Support

For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official OneTouch website. You can also contact OneTouch customer service directly for assistance with product inquiries, troubleshooting, or replacement parts.

Manufacturer: OneTouch

Website: www.onetouch.com