Joie Roomie Glide Bedside Sleeper Crib P1814A Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Joie Roomie Glide Bedside Sleeper Crib. Please read all instructions carefully before assembly and use. Keep this manual for future reference.

2. Safety Information

WARNING:

• Always ensure the crib is securely attached to the adult bed when used in bedside sleeper mode.
• Never use the bedside sleeper if any parts are missing, damaged, or broken. Contact the manufacturer for replacement parts.
• Do not use more than one mattress in the crib.
• The product is suitable for children from birth up to 9 kg (approximately 6 months) or until the child can push up on their hands and knees, whichever comes first.
• Ensure the space between the bedside sleeper and the adult bed is no more than 2 cm.
• Always engage the gliding lock when the crib is stationary.
• Keep all small parts out of reach of children during assembly.

3. Package Contents

Verify that all components are present before beginning assembly:

• 1 x Joie Roomie Glide Bedside Sleeper Crib Frame
• 1 x Mattress
• 1 x Travel Bag
• Instruction Manual (this document)

4. Setup and Assembly

Follow these steps to assemble your Joie Roomie Glide Bedside Sleeper Crib:

1. Unpack Components: Carefully remove all parts from the packaging.
2. Assemble Frame: Extend the crib frame until it locks into place. Ensure all locking mechanisms are engaged.
3. Insert Mattress: Place the provided mattress securely into the crib base.
4. Adjust Height: Use the height adjustment mechanism on the legs to set the desired height. The crib offers 11 height adjustments to match various bed heights. Ensure both sides are adjusted to the same level for stability.

Image 1: Assembled Joie Roomie Glide Bedside Sleeper Crib with the side panel in the upright position.

Image 2: Side view of the crib illustrating the height adjustment mechanism on the leg, numbered 1 through 11.

5. Operating Instructions

5.1. Side Panel Operation

The sliding side panel can be lifted and lowered with one hand. To lower, press the release button and gently slide the panel down. To raise, simply lift the panel until it locks into place.

Image 3: Front view of the crib with the side panel lowered, demonstrating bedside sleeper configuration.

5.2. Gliding Function

The crib features a smooth single-hand glide function to soothe your baby. To activate, ensure the gliding lock is disengaged. To stop the gliding motion, engage the one-touch gliding lock to keep the cot firmly in place.

5.3. Tilt Function

A soothing tilt function gently inclines the crib, which can assist with digestion. To activate the tilt, adjust one side of the crib to a higher setting than the other using the height adjustment mechanism. Ensure the tilt is gentle and safe for the infant.

Image 4: The crib shown in a gently tilted position, with one side higher than the other.

5.4. Attaching to Adult Bed

The crib can be secured to an adult bed using the provided strap and clip attachment system. Adjust the folding feet to fit close to your bed, including divans. Ensure the crib is flush against the adult bed and securely fastened to prevent gaps.

5.5. Moving the Crib

The crib is equipped with four lockable wheels for easy movement. The wheels are rubber-covered to protect flooring. To move, unlock the wheels. To secure the crib in place, lock all four wheels.

6. Maintenance

6.1. Cleaning

• Fabrics: The woven fabrics are wipeable for easy cleaning. For deeper cleaning, the mattress cover is machine washable and can be removed easily.
• Frame: Wipe the frame with a damp cloth and mild soap. Do not use abrasive cleaners.

6.2. Storage

The crib is designed for easy disassembly and can be stored in the included travel bag when not in use or for transport.

7. Troubleshooting

• Crib not stable: Ensure all frame components are fully locked and both legs are adjusted to the same height (unless intentionally tilted).
• Side panel not sliding smoothly: Check for any obstructions in the sliding mechanism. Ensure the release button is fully pressed.
• Wheels not locking: Verify that the locking levers on each wheel are fully engaged.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the warranty card included with your purchase or contact Joie customer support directly. Keep your proof of purchase for any warranty claims.

For further assistance or to purchase replacement parts, please visit the official Joie website or contact their customer service department.