1. Introduction
The Faber Oxypure Ozonizer is designed to sanitize fruits, vegetables, seafood, meat, tableware, and baby milk bottles using active oxygen bubbles. This appliance helps to remove pesticides, chemicals, and kill harmful bacteria, fungi, and other pathogens, ensuring cleaner and safer food preparation.
Image 1.1: Faber Oxypure Ozonizer with various produce.
2. Important Safety Instructions
Please read all instructions carefully before using the appliance. Retain this manual for future reference.
- Do not immerse the main unit in water or any other liquid.
- Ensure the power cord and plug are not damaged. If damaged, contact authorized service personnel.
- Keep the appliance out of reach of children.
- Use the appliance only for its intended purpose as described in this manual.
- Do not operate the appliance if it has been dropped or damaged in any way.
- Ensure the appliance is placed on a stable, flat surface during operation.
- Do not block the air vents during operation.
- Unplug the appliance from the power outlet when not in use and before cleaning.
3. What's in the Box
Upon unpacking, please verify that all components are present and in good condition.
- 1 x Faber Oxypure Ozonizer Unit
- 1 x User Manual
4. Setup
- Unpacking: Carefully remove the Oxypure Ozonizer from its packaging.
- Placement: Place the unit on a stable, flat, and dry surface, away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit.
- Power Connection: Connect the power cord to a suitable electrical outlet. Ensure the voltage matches the appliance's requirements.
- Hose Connection: Attach the provided hose to the designated outlet on the unit. Ensure it is securely fitted.
Image 4.1: Rear view of the Ozonizer with hose and power cord.
5. Operating Instructions
The Faber Oxypure Ozonizer features a digital readout push button with an automatic timer function (15-20 minutes). It is designed for sanitizing various items.
5.1 General Operation
- Fill the container with water and place the items to be sanitized inside. Ensure items are fully submerged.
- Close the lid securely.
- Plug in the appliance. The digital display will illuminate.
- Press the appropriate function button (e.g., for fruits, vegetables, meat, etc.) or the timer button to set the desired duration. The unit typically operates for 15-20 minutes.
- The ozonizer will begin releasing active oxygen bubbles into the water.
- Once the cycle is complete, the unit will automatically shut off.
- Carefully remove the sanitized items and rinse them with clean water if desired.
5.2 Specific Applications
- Fruits & Vegetables: Place produce in the container with water. The ozonizer helps remove pesticides and chemicals.
- Meat & Seafood: Use the ozonizer to deodorize and sanitize meat and seafood, reducing harmful bacteria.
- Tableware & Baby Bottles: The appliance can be used to sanitize tableware and baby milk bottles, killing pathogens.
Image 5.1: Digital timer function for precise operation.
Image 5.2: Application for deodorizing meat and seafood.
6. Maintenance
Regular cleaning and proper care will ensure the longevity and efficient operation of your Faber Oxypure Ozonizer.
- Cleaning the Container: After each use, empty the water and rinse the container with clean water. Use a soft cloth to wipe down the interior.
- Cleaning the Exterior: Wipe the exterior of the unit with a damp cloth. Do not use abrasive cleaners or immerse the main unit in water.
- Hose Maintenance: Ensure the hose is free from blockages. Rinse it periodically with clean water.
- Storage: Store the appliance in a cool, dry place when not in use.
7. Troubleshooting
If you encounter any issues with your Oxypure Ozonizer, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply; loose connection. | Check if the power cord is securely plugged into the outlet and the unit. Ensure the power outlet is functional. |
| No bubbles or weak bubbling. | Hose blockage; air pump issue. | Check the hose for kinks or blockages and clear them. Ensure the hose is properly connected. If the issue persists, contact customer support. |
| Ozone smell is weak or absent. | Ozone generator malfunction. | This indicates a potential internal component failure. Contact customer support for assistance. |
| Unit stops working prematurely. | Overheating; internal fault. | Unplug the unit and let it cool down. If the problem continues, contact customer support. |
Note: Do not attempt to repair the appliance yourself. Unauthorized repairs will void the warranty.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 131.0625.634 |
| Capacity | 10 Liters |
| Dimensions (L x W x H) | 33 cm x 27 cm x 32 cm |
| Item Weight | 1.5 kg |
| Timer Function | Automatic (15-20 minutes) |
| Usage | Fruit, Vegetable, Seafood, Meat, Tableware, Baby milk bottle Sanitization |
9. Warranty and Support
The Faber Oxypure Ozonizer comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
For warranty claims, technical support, or service inquiries, please contact Faber customer service:
- Customer Service Number: 1800-209-3484
- Please have your model number (131.0625.634) and proof of purchase ready when contacting support.