ECOXGEAR GDI-EX3W210

ECOXGEAR EcoExtreme 2 Dry Box Bluetooth Speaker User Manual

Model: GDI-EX3W210 | Brand: ECOXGEAR

1. Introduction

The ECOXGEAR EcoExtreme 2 is a rugged, waterproof, and dustproof dry box Bluetooth speaker designed to protect your smartphone and other small valuables while delivering clear, powerful audio. Its durable construction and advanced features make it ideal for outdoor adventures, beach trips, poolside relaxation, and more.

What's in the Box

  • 1x EcoExtreme 2 Speaker
  • 1x USB-C Cable
  • User Guide
  • 1x Carabiner
Front view of the ECOXGEAR EcoExtreme 2 speaker, showing the control panel and battery indicator lights.

Figure 1: Front view of the EcoExtreme 2 speaker with control panel.

2. Setup

Charging the EcoExtreme 2

Before first use, fully charge your EcoExtreme 2. Locate the USB-C charging port inside the dry box compartment. Connect the provided USB-C cable to the speaker and a compatible USB power source (not included). The battery indicator lights on the front of the speaker will illuminate during charging. All lights will be solid when fully charged. Charging time is approximately 3 hours. The speaker can play audio while recharging.

Interior view of the EcoExtreme 2 dry box, showing the USB-C charging port and storage mesh for cables.

Figure 2: Interior view of the EcoExtreme 2 dry box with charging port.

Initial Bluetooth Pairing

Ensure your EcoExtreme 2 is charged and powered on. Press and hold the Bluetooth button on the speaker's control panel until the Bluetooth indicator light flashes, indicating pairing mode. On your smartphone or Bluetooth-enabled device, navigate to Bluetooth settings and select "EcoExtreme 2" from the list of available devices. Once connected, the Bluetooth indicator light on the speaker will become solid.

3. Operating Instructions

Basic Controls

The EcoExtreme 2 features external buttons for convenient control of your device while it's safely stored inside.

ButtonFunction
Power ButtonPress to turn on/off.
Bluetooth ButtonPress to enter Bluetooth pairing mode.
Microphone ButtonActivates push-to-talk function (with Zello App).
Light ButtonControls internal light modes.
Volume Up/DownAdjusts speaker volume.
Play/PauseControls media playback.
Previous/Next TrackSkips to previous or next audio track.

Using the Dry Box

The EcoExtreme 2 features a watertight dry storage compartment for your smartphone, keys, and other small items. To open, unlatch the side clips and lift the lid. Place your device inside. Ensure the compartment is clean and free of debris before closing. Securely close the lid and fasten both side clips to maintain the waterproof seal.

A hand demonstrating how to securely close the side latches of the EcoExtreme 2 to ensure a watertight seal.

Figure 3: Securing the dry box latches.

EcoCast Feature

Wirelessly connect up to 100 EcoCast enabled speakers for a synchronized audio experience. To initiate EcoCast, power on all speakers. On the primary speaker, press the EcoCast button (often indicated by a wave icon). On secondary speakers, press the EcoCast button to join the group. Ensure all speakers are within range for optimal performance.

Push-to-Talk (Zello App)

When linked with the Zello App on your smartphone (stored inside the dry box), the microphone button on the EcoExtreme 2 allows for push-to-talk communication. Refer to the Zello App's instructions for setup and usage.

4. Maintenance

Cleaning

Clean the exterior of the speaker with a soft, damp cloth. Avoid abrasive cleaners or solvents. For the dry box interior, wipe with a clean, dry cloth. Ensure no moisture remains before closing.

Waterproofing Care

The EcoExtreme 2 meets IP67 international standards for waterproofing and dustproofing. To maintain its waterproof integrity, always ensure the dry box lid is securely closed and both side latches are fastened before exposing the speaker to water or dust. Regularly inspect the rubber gasket around the dry box opening for any signs of wear, tears, or debris. A damaged gasket can compromise the waterproof seal.

The EcoExtreme 2 speaker floating on water, demonstrating its waterproof capability.

Figure 4: EcoExtreme 2 floating in water.

5. Troubleshooting

No Power

  • Ensure the battery is charged. Connect the USB-C cable and allow it to charge for at least 30 minutes.
  • Press and hold the Power button for a few seconds to ensure it's not just in standby mode.

No Bluetooth Connection

  • Ensure the EcoExtreme 2 is in pairing mode (flashing Bluetooth light).
  • Turn off and on Bluetooth on your device.
  • Forget "EcoExtreme 2" from your device's Bluetooth list and attempt to re-pair.
  • Ensure your device is within 100 feet of the speaker.

Poor Sound Quality

  • Check the volume levels on both the speaker and your connected device.
  • Ensure there are no obstructions blocking the speaker grille.
  • If in water, ensure the speaker is not submerged in a way that muffles the sound.

Water Inside Dry Box

  • Immediately remove your device and dry both the device and the dry box thoroughly.
  • Inspect the rubber gasket for damage or debris. Clean or replace if necessary.
  • Ensure the latches are fully secured when closing the dry box.

6. Specifications

FeatureDetail
Model NameEcoExtreme 2
Model NumberGDI-EX3W210
BrandECOXGEAR
MaterialPlastic
Speaker TypeOutdoor
Special FeaturesPortable, Waterproof, Lightweight, Built-In Microphone, Stereo Pairing
Recommended UsesFor Smartphones or Tablets
Compatible DevicesSmartphone, Tablet, MP3 Player
Unit Count1.0 Count
Controller TypePush Button
Surround Sound Channel1.0 (Mono)
ColorGray
Battery LifeUp to 15 Hours
Included ComponentsUser Guide, 1x EcoExtreme 2, 1x USB-C Cable, 1x Carabiner
Product Dimensions (D x W x H)2.6"D x 5.5"W x 10.1"H
Item Weight22 Ounces (1.38 pounds)
Impedance4 Ohm
Waterproof RatingIP67
Battery Capacity2600 Milliamp Hours
Charging TimeApproximately 3 Hours
Bluetooth RangeUp to 100 Feet
Power SourceBattery Powered
Signal-to-Noise Ratio88 dB
Audio Driver TypeDynamic Driver
Number of Microphones1
Connectivity ProtocolBluetooth
ManufacturerGrace Digital
First Available DateAugust 11, 2020
Maximum Output Power15 Watts
Mounting TypeDry Box
Diagram showing the internal dimensions of the EcoExtreme 2 dry box.

Figure 5: Internal compartment dimensions.

7. Warranty and Support

Warranty Information

The ECOXGEAR EcoExtreme 2 comes with a Limited Warranty. Please refer to the included User Guide for detailed warranty terms and conditions.

Customer Support

For further assistance, technical support, or warranty claims, please contact ECOXGEAR customer service. Visit the official ECOXGEAR website for contact information and frequently asked questions: ECOXGEAR Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.